Professional Documents
Culture Documents
PERANCANGAN KURSUS
COURSE OUTLINE
MAKLUMAT KURSUS
(COURSE INFORMATION)
Kursus Pra-syarat (Pre-Requisite Course) : DEA 1343 – LOW VOLTAGE CABLE INSTALLATION
Nama Pensyarah (Name of Lecturer) : EN MOHD FIKRI BIN MOHD SANI
CIK NOR NABIHAH BINTI ZAINY @ AHMAD ZAINY
Nama (Name) : MOHD FIKRI BIN MOHD SANI Nama (Name) : MOHD FAIZAL BIN GHAZALI
Tarikh (Date) : 1 NOVEMBER 2021 Tarikh (Date) : 1 NOVEMBER 2021
DEA 2313 1
EDITED MAC 2021
KOLEJ VOKASIONAL KUALA KLAWANG
JABATAN TEKNOLOGI ELEKTRIK DAN ELEKTRONIK
MATLAMAT (GOALS) :
This course prepare the student knowledge and install sub switchboard and main switch board, low voltage electrical switch board,
low voltage generator set and motor control centre using blueprint, and troubleshoot and test low voltage underground cable fault
with correct procedures
SINOPSIS (SYNOPSIS):
A continuation of Underground Cable. At the end of the course the student can install sub switchboard and main switch board, low
voltage electrical switch board and low voltage generator set using blueprint, sub board hand tools etc. so that it is mounted firmly
according to specification and regulations.
DEA 2313 2
EDITED MAC 2021
KOLEJ VOKASIONAL KUALA KLAWANG
JABATAN TEKNOLOGI ELEKTRIK DAN ELEKTRONIK
DEA 2313 3
EDITED MAC 2021
KOLEJ VOKASIONAL KUALA KLAWANG
JABATAN TEKNOLOGI ELEKTRIK DAN ELEKTRONIK
termination.
2.5.2 Identify type of connection and termination for SSB according
to SSB and cable termination procedure.
2.5.3 Assemble and connect the cable and terminated according to
SSB and cable termination procedure.
2.5.4 Carry out and mount the SSB to actual location according to
IEC Regulation.
2.6 Apply safety workshop.
2.6.1 Utilize suitable protective equipment’s and display safety sign-
board according to IEC Regulation.
2.6.2 Practice the safety requirement according to standard safety
procedure.
2.7 Lab
2.7.1 Install Main Switch Board Practical work
2.7.2 Perform Main Switch Board Operation
7-9 3.0 INSTALL LOW VOLTAGE GENERATOR (15 HOURS)
3.1 Obtain blueprint.
3.1.1 Identify layout plan/schematic circuit diagram according to
circuit diagram.
3.1.2 Interpret the blue print diagram according to blueprint.
3.2 Inspect of actual location.
3.2.1 Interpret the blue print diagram according to building structure. Test,
3.2.2 Identify type of indoor or outdoor and survey technique on
actual location according to rules and regulation.
3.2.3 Determine type of visual check at the location according to
rules and regulation.
3.2.4 Determine and identify any obstacle at indoor/outdoor on
location according to rules and regulation.
3.3 Select LV Generator set and AMF Board (Automatic Main Failure).
3.3.1 Define various type and size generator set and AMF board
according to standard procedure.
3.3.2 Identify types and size of generator set and AMF board
according to standard procedure.
3.4 Confirm generator set/AMF board.
3.4.1 Identify type and consumption of load according to gen-
set/AMF board.
3.4.2 Apply gen-set/AMF board installation according to
procedure/techniques.
3.4.3 Interpret ‘load test’ report according to gen-set/AMF.
3.4.4 Analyse approval form according to standard board procedure.
DEA 2313 4
EDITED MAC 2021
KOLEJ VOKASIONAL KUALA KLAWANG
JABATAN TEKNOLOGI ELEKTRIK DAN ELEKTRONIK
DEA 2313 5
EDITED MAC 2021
KOLEJ VOKASIONAL KUALA KLAWANG
JABATAN TEKNOLOGI ELEKTRIK DAN ELEKTRONIK
DEA 2313 6
EDITED MAC 2021
KOLEJ VOKASIONAL KUALA KLAWANG
JABATAN TEKNOLOGI ELEKTRIK DAN ELEKTRONIK
5.7 Lab
5.7.1 Troubleshoot Low Voltage Underground Cable Fault Practical work
15 STUDY WEEK
16 FINAL EXAMINATION WEEK
17 FINAL EXAMINATION WEEK
AMALI (PRACTICAL) :
1. Install sub-switch board.
2. Install main-switch board.
3. Perform Main Switch Board Operation.
4. Install low voltage generator.
5. Install low voltage motor control centre.
6. Troubleshoot low voltage underground cable fault.
DEA 2313 7
EDITED MAC 2021
KOLEJ VOKASIONAL KUALA KLAWANG
JABATAN TEKNOLOGI ELEKTRIK DAN ELEKTRONIK
PENILAIAN (ASSESSMENT):
No Type of Assessment CLO
Continuous Assessment CLO 1-(C2, PLO1) CLO 2-(P2, PLO2) CLO 3-(A2, PLO6)
-Test 10%
1
-Practical work 35% 5%
-Assigment 5% 5%
Final Examination
2 Theory 10%
Practical 30%
Sub Total 20% 70% 10%
Total 100%
ASSESSMENT METHODS
CLO
FOR COURSEWORK (CA)
ASSIGNMENT
PRACTICAL WORK
CONTENT
CLO1
CLO2
CLO3
TEST
C P A
1.0 Install switch board √ √ √
DEA 2313 8
EDITED MAC 2021
KOLEJ VOKASIONAL KUALA KLAWANG
JABATAN TEKNOLOGI ELEKTRIK DAN ELEKTRONIK
1. Pelajar mesti hadir tidak kurang dari 80% masa pertemuan yang ditentukan bagi sesuatu kursus.
Students must attend lectures not less than 80% of the contact hours for every course .
2. Pelajar yang tidak memenuhi perkara (1) di atas tidak dibenarkan menghadiri kuliah dan menduduki sebarang bentuk penilaian
selanjutnya. Markah sifar (0) akan diberikan kepada pelajar yang gagal memenuhi perkara (1).
Students who do not fulfill (1) will not be allowed to attend further lectures and sit for any further examination. Zero mark (0)
will be given to students who fail to comply with (1).
3. Pelajar perlu mengikut dan patuh kepada peraturan berpakaian yang berkuatkuasa dan menjaga disiplin diri masing-masing
untuk mengelakkan dari tindakan tatatertib diambil terhadap pelajar.
Students must obey all rules and regulations of the university and must discipline themselves in order to avoid any disciplinary
actions against them.
4. Pelajar perlu mematuhi peraturan keselamatan semasa proses pembelajaran dan pengajaran.
Student must obey safety regulations during learning and teaching process.
DEA 2313 9
EDITED MAC 2021
KOLEJ VOKASIONAL KUALA KLAWANG
JABATAN TEKNOLOGI ELEKTRIK DAN ELEKTRONIK
DEA 2313 10
EDITED MAC 2021