Professional Documents
Culture Documents
Revision: B
Job No: 18705 Page: C/01
Calcs By: RKR Date: 28/01/2022
Data Input
Provide the dead load factor for the type of roof and state the code
= 3.417914 kN
b) Live Load
All the same data input as above applies in this section so
Provide the live load factor for the type of roof and state the code
= 4.101496 kN
= 17.76 kN
b) Live Load
All the same data input as above applies in this section so
Provide the live load factor for the type of floor area usage and state the code
= 5.92 kN
= 3.45 metres
= 9.94 kN
b) Load Bearing Walls on beams
Provide the Length and height of these walls Unit Weight of the Bricks
Width of wall , Default 230 m
Length = 3.45 metres (provide the length to the next support in metres)
Height = 3 metres (provide the length to the next support in metres)
= 2.88 kN
Next up we have to take into account the stub of the column just before the base
5) Stub Column Type Rectangle
a) Dead Load
= 1.44 kN
Degrees Reduction factor = 1.155
(provide the length to the next support in metres)
(provide the length to the next support in metres)
ASCE 2002
2.96 X 1.155
ASCE 2002
2.96 X 1.155
BS
2.96 X 0.250 Unit weight by the area by the thickness
BS
2.96
X 23
BS
or Indiviudal Heights
X 22
Circle Rectangle
Circle Rectangle
Component
Dead No: Result Live No: Result
Roof = 3.42 1 3.42 4.10 1 4.10
Slabs = 17.76 1 17.76 5.92 1 5.92
Walls on Slabs = 0 0 0.00 0 0 0.00
Beams = 9.94 2 19.87 0 2 0.00
Walls on Beams = 45.54 1 45.54 0 1 0.00
Columns = 2.88 2 5.76 0 2 0.00
Stub = 1.44 1 1.44 0 1 0.00
Maximum Allowable Bearing Pressure = 200 kPa or kN/m2 it’s the same
112.38 10
79.96 17.2
192.34 27.2
259.34