Professional Documents
Culture Documents
1. Design Consideration
Finishing = 0.1 KPa
Roof = 0.4 KPa
Ceiling & MEPHS = 0.35 KPa
Wall(Exterior & Interior) = 2.11 KPa
Thickness of Slab (m) = 0 (roof)
0.1 (3rd)
0.1 (2nd)
0 (ground)
Unit Weigth of Concrete = 24 KN/m3
2. Sizes of Beams
depth width
at 4th level = 0.4 X 0.2 (m, maximum)
at 3rd level = 0.4 X 0.2 (m, maximum)
at 2nd level = 0.4 X 0.2 (m, maximum)
at ground floor = 0.4 X 0.2 (m, maximum)
3. Sizes of Columns
at 3rd to 4th level = 0.2 X 0.4 (m, maximum)
at 2nd to 3rd level = 0.2 X 0.4 (m, maximum)
at ground to 2nd level = 0.2 X 0.4 (m, maximum)
4. Computation of Loads
208.5. Design Base Shear
1 total design base shear in the direction shall be determined:
Cv I W
V = = 357.3119
RT
2 the total design base shear will not exceed the ffg.
2.5 Ca I W
V = = 130.6422
R
3 the total design base shear shallnot be less than the ffg.
V = 0.11 Ca I W = 48.86
4 In addition for Seismic Zone 4, the total desig base shear shall be also less than the ffg.
0.8 Z Nv I W
V = = 46.45
R
208.5. Structure Period
The value of T shall be determined from one of the following methods
tabulated
flr.level hn Ct T=Ct(hn)3/4
4th 0
3rd 6.2 0.0731 0.287
2nd 3.2 0.0731 0.175
V = 130.64
F4th = 0 KN
F3rd = 50.9589829 KN
F2nd = 79.68319593 KN
frame 1
no. of column = 2
F4th = ‐ KN
F3rd = 25.5 KN
F2nd = 39.8 KN