Professional Documents
Culture Documents
Mid Girder Section
Mid Girder Section
member is calculated by considering a T- section. The deck slab length equal to half
the spacing between the girders on the either side forms the flange of the T-section.
The web portion is constituted by the I-girder.
Deck slab
(iv) End Cross Girder Members: This represents cross girders provided at the
pier/abutment locations. The property of this member is calculated by considering a
T- section. Effective width is considered based on the longitudinal girder spacing.
(v) Intermediate Cross Diaphragm Member: This represents diaphragms provided at the
mid span of girder. The property of this member is calculated by considering a T-
section. Effective width is considered based on the longitudinal girder spacing.
(vi) Other Transverse Members: The span of the grillage is divided into equal number of
convenient sections.(imaginary) The property of these members are calculated based
on its position and the spacing of this imaginary sections. Accordingly following
different entities are considered
• Slab Adjacent to End Cross Girder: The property of this member is calculated
considering it as a rectangular section the depth being the depth of the deck slab
and the width being the width from slab edge to the mid of the spacing between
imaginary sections. The effective width of end cross girder considered in the
design is deducted from the width calculated for this member.
30