Professional Documents
Culture Documents
Bill of Quantities
Bill of Quantities
Zero point
A. Civil Works of Building including Inspection Pit and Septic tank
A. N/A N/A N/A 0.001 0.001 Zero Zero 0.000 Zero
(All the items include VAT & profit) :
One
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 48/63
11/2/21, 11:23 AM Individual Report
3 N/A N/A Earth work in excavation in all kinds of soil for foundation trenches m3 690.320 60.001 Sixty 41419.890 Forty-One
including layout, providing center lines, bench-mark pillars, leveling, point Zero Thousand
ramming and preparing the base, fixing bamboo spikes & making Zero One Four
layout with chalk powder providing necessary tools and plants, Hundred
protecting and maintaining the trench dry etc., stacking, cleaning and
the excavated earth at a safe distance out of the area enclosed by Nineteen
the layout etc. All complete and accepted by the Engineer, subject point
to submit method statement of carrying out cxcavation work to the Eight
Engineer for approval. However, Engineer`s approval shall not Nine
relieve the contractor of his responsibilities and obigations under the
contract. Earthwork in excavation in foundation trenches any depth
and maximum 10m lead: in all type of soil.
Twenty-
Nine
Earth filling in foundation trenches and plinth in 150 mm layer with Thousand
earth available within 90 m of the building site to achive minimum One One
dry density of 95% with optimum moisture content (Modified proctor Hundred Hundred
4 N/A N/A m3 291.280 100.001 29128.291
test) including carrying, watering, leveling, dressing and compacting point Zero and
to a specified percentage each layer up to finished level etc. all Zero One Twenty-
complete and accepted by Engineer-in-charge. Eight
point Two
Nine One
One Lakh
Three
Sand filling in foundation trenches and plinth with sand having Thousand
minimum F.M. 1.2 in 150 mm in layers including leveling, watering Six Nine
and compaction to achieve minimum dry density of 95% with Hundred Hundred
5 N/A N/A m3 173.200 600.001 103920.173
optimum moisture content (Modified proctor test) by ramming each point Zero and
layer up to finished level as per design supplied by the design office Zero One Twenty
only, all complete and accepted by the Engineer-in-charge. point One
Seven
Three
One Lakh
Twenty-
Two
One layer brick flat soling in foundation or in floor with first Three
Thousand
class/picked jhama bricks including preparation of bed and filling the Hundred
6 N/A N/A m2 406.880 300.001 122064.407 AND
interstices with local sand, leveling etc. complete and accepted by point Zero
Sixty-
the Engineer-in-charge. Zero One
Four point
Four Zero
Seven
7 N/A N/A Supplying and laying of single layer polythene sheet weighing one m2 406.880 30.001 Thirty 12206.807 Twelve
kilogram per 6.5 square meter in floor or any where below cement point Zero Thousand
concrete complete in all respect and accepted by Engineer-in- Zero One Two
charge. Hundred
and Six
point
Eight
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 49/63
11/2/21, 11:23 AM Individual Report
Zero
Seven
Three
Lakh
Thirty-
250 mm & above thick brick work with 1st class bricks in cement
Nine
morter (1:4)with Sand (F.M. 1.2) for foundation,plinth and Two
Thousand
superstructure and Septic tank filling the interistices fully with morter Thousand
9 N/A N/A m3 169.840 2000.001 339680.170 Six
and soaking the bricks at least for 24 hours before use and curing at point Zero
Hundred
least for 7 days etc.all complete as per direction of the Engineer in Zero One
and
charge.
Eighty
point One
Seven
Seven
Lakh
Sixty-Two
125 mm brick works with first class bricks with cement sand (F.M.
Thousand
1.2) mortar (1:4) and making bond with connected walls including
Nine Six
necessary scaffolding, raking out joints, cleaning and soaking the
Hundred Hundred
10 N/A N/A bricks for at least 24 hours before use and washing of sand, curing m2 847.360 900.001 762624.847
point Zero and
at least for 7 days in all floors including cost of water, electricity and
Zero One Twenty-
other charges etc. all complete and accepted by the Engineer-in-
Four point
charge.
Eight
Four
Seven
Three
Lakh
Seventy-
Two
Supplying, fitting and fixing homogeneous floor tiles (local made) ( One
Thousand
RAK/FU-WANG /AKIJ) with cement sand (F.M 1.8) mortar (1:3) Thousand
Two
base and raking out the joints with white cement including cutting Two
11 N/A N/A m2 310.240 1200.001 372288.310 Hundred
and laying the tiles in proper way and finishing with care etc. all Hundred
and
complete and accepted by the Engineer in charge. Homogeneous point Zero
Eighty-
300 x 300 mm floor tiles Zero One
Eight
point
Three
One
12 N/A N/A Supplying, fitting and fixing wall tiles (local made) ( RAK/FU-WANG m2 835.920 1100.001 One 919512.836 Nine
/AKIJ) with on 20 mm thick cement sand (F.M. 1.2) mortar (1:3) Thousand Lakh
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 50/63
11/2/21, 11:23 AM Individual Report
base and raking out the joints with white cement including cutting, One Nineteen
laying and hire charge of machine and finishing with care etc. Hundred Thousand
including water, electricity and other charges complete all respect point Zero Five
accepted by the Engineer in charge. Coloured wall tiles of 250 X Zero One Hundred
300 mm size (7'-0'' height.) and
Twelve
point
Eight
Three Six
Two Lakh
Twelve
Minimum 12mm thick cement sand (F.M. 1.5) Plaster (1:6) having Thousand
with fresh cement to wall both inner-and outer surface, finishing the Two Four
corner and edges including washing of sand cleaning the surface, Hundred Hundred
13 N/A N/A m2 1062.400 200.001 212481.062
scaffolding and curing at least for 7 days, cost of water, electricity point Zero and
and other charges etc. all complete in all respect as per drawing Zero One Eighty-
and accepted by the Engineer in charge. One point
Zero Six
Two
Minimum 12mm thick cement plaster (1:4) with NCF having cement
fineness min 2800cm2/g, initial setting time min 45 minutes, final
One Lakh
setting time max 375 minutes, gypsum <3% mixed with clinker, free
Two Thirty-Six
from ash & any other foreign materials to give a minimum cylinder
Hundred Thousand
crushing strength of 19Mpa for 7 (seven) days concrete from a
and Eight
14 N/A N/A machine mixed typical batch with fresh cement (conforming to BDS m2 621.840 220.001 136805.422
Twenty Hundred
232) to dado and plinth wall upto 150mm below ground level with
point Zero and Five
neat cement finishing in/c washing of sand, finishing the edges and
Zero One point Four
corners and curing at least for 7 days, cost of water, electricity &
Two Two
other charges etc. all complete in all respect as per drawing and
direction of the Engineer in charge.
One Lakh
Minimum 6 mm thick cement sand (F.M 1.5) plaster (1:4) with fresh Four
cement to ceiling R.C.C. columns, beams, surface of stair case, Thousand
Two
sunshades, cornices, railings, drop wall, louvers, fins and finishing Six
Hundred
15 N/A N/A the corners and edges including washing of sand cleaning the m2 523.200 200.001 104640.523 Hundred
point Zero
surface, scaffolding and curing at least for 7 days, cost of water, and Forty
Zero One
electricity and other charges etc. all complete in all respect as per point Five
drawing and accepted by the Engineer in charge. Two
Three
16 N/A N/A Reinforced cement concrete works using steel shutter, with N/A 0.001 0.001 Zero point 0.000 Zero
minimum cement content relates to mix ratio 1:2:4 having minimum Zero Zero
f 'cr = 24 Mpa, and satisfying a specified compressive strength f ?c= One
19 Mpa at 28 days on standard cylinders as per standard practice of
Code ACI/BNBC/ASTM & cement conforming to BDS EN-197-1-
CEM1, 52.5N (52.5MPa) / ASTM-C 150 Type ? I, best quality sand
[50% quantity of best local sand (F.M. 1.2) and 50% quantity of
Sylhet sand or coarse sand of equivalent F.M. 2.2] and 20 mm down
well graded picked jhama brick chips conforming ASTM C-33
including breaking chips and screening, making, placing shutter in
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 51/63
11/2/21, 11:23 AM Individual Report
position and maintaining true to plumb, making shutter water-tight
properly, placing reinforcement in position; mixing in standard mixer
machine with hoper fed by standard measuring boxes, casting in
forms, compacting by vibrator machine and curing at least for 28
days, removing centering-shuttering after specified time approved;
including cost of water, electricity, additional testing charges of
materials and cylinders required by engineer, other charges etc. all
complete approved and accepted by the Engineer. (Rate is
excluding the cost of reinforcement and its fabrication, placing and
binding etc) all complete in all respect as per drawing and accepted
by the Engineer in charge.
Twenty-
Two Lakh
Twenty-
Nine
Eleven Thousand
Thousand Nine
16(a) N/A N/A a) 1:2:4 concrete for casting, lintel and slab etc. m3 202.720 11000.001 2229920.203
point Zero Hundred
Zero One and
Twenty
point Two
Zero
Three
Six Lakh
Sixty-
Eight
Thousand
Four
Two
b) Steel Formwork/shuttering, steel prop necessary steel supports Hundred
16(b) N/A N/A m2 1670.640 400.001 668257.671 Hundred
etc. point Zero
and Fifty-
Zero One
Seven
point Six
Seven
One
17 N/A N/A Supplying, fabrication, and fixing to details as per design : Rabbed KG 26000.000 100.001 One 2600026.000 Twenty-
or Deformed Bar Reinforcement for Reinforced Cement Concrete, Hundred Six Lakh
produced and marked in accordance with BDS ISO 6935 - 2: 2006 point Zero AND
(or standard subsequently released from BSTI) including Zero One Twenty-
straightening and cleaning rust, if any, bending and binding in Six
position with supply of G.l. wires, splices of laps what so ever etc.
complete in all respects and accepted by the Engineer.
(Measurement shall be recorded only on Standard Mass per Unit
length of Bars, while, dia of bars exceeds its standard) Grade 400 (
RB 400 : complying BDS ISO 6935-2:2006) ribbed or deformed bar
produced and marked according to Bangladesh Standard with
minimum yield strength, fy (ReH)= 400MPa, but fy not exceeding
418MPa and what ever is the yield strength within allowable limit as
per BNBC sec 8.3.3.5/ACI 318-11 sec 21.1.5.2, the ratio of ultimate
tensile strength fu to yield strength fy, shall be at least 1.25 and
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 52/63
11/2/21, 11:23 AM Individual Report
minimum elongation after fracture and minimum total elongation at
maximum force is 17% and 8% respectively.
Two
Eighty
Thousand
Thousand
Five
19 A N/A N/A a) 760 mm x 2130 mm uPVC plastic shutter (solid) Each 32.000 2500.001 80000.032 point Zero
Hundred
Three
point Zero
Two
Zero One
Forty-
Two
Four
Thousand
Thousand
Eight
19 B N/A N/A b) 910 mm x 2130 mm uPVC plastic shutter (solid) Each 16.000 2800.001 44800.016 Eight
Hundred
Hundred
point Zero
point Zero
Zero One
One Six
19 C N/A N/A Supplying fitting & fixing of uPVC plastic door or window frame m 243.920 250.001 Two 60980.244 Sixty
having specific gravity 1.35 - 1.45, and other physical, chemical, Hundred Thousand
thermal, fire resistivity properties etc. as per BSTI approved and Fifty Nine
manufacturer standards or ASTM, BS/ISO/IS standards fitted and point Zero Hundred
fixed in brick wall/ R.C.C wall with 6 Nos. GI clamp, 4 nos inner joint Zero One and
GI clamp, 2 nos. outer GI joint clamp, 16 nos. rivet making Eighty
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 53/63
11/2/21, 11:23 AM Individual Report
necessary grooves and mending good the damages, finishing, point Two
curing, carriage etc complete in all respect accepted by the Four Four
Engineer-in-charge.
Thirteen
Thousand
Nine
Six
Supplying, fitting and fixing 38 mm dia stainless steel pipe for Hand Hundred
Hundred
20 N/A N/A Rail including cutting, bending, finishing etc. all complete as per RM 23.200 600.001 13920.023 and
point Zero
direction of Engineer in charge. Twenty
Zero One
point Zero
Two
Three
One Lakh
Forty-
Eight
Supplying,fitting and fixing high window grill as per design made of One Thousand
mild steel F.I section (20 mm x 3 mm) with outer frame of (25 mm x Thousand One
6 mm) F.I bar , fabricating,welding, cost of electricity, workshop Two Hundred
21 N/A N/A m2 123.440 1200.001 148128.123
charges, carriage, fixing with pre-placed clamps in walls, all Hundred and
necessary tools and plants as per design, drawing, specifications point Zero Twenty-
and direction of the Engineer in charge. Zero One Eight
point One
Two
Three
23 N/A N/A Standard synthetic enamel paint of approved best quality and colour m2 443.280 150.001 One 66492.443 Sixty-Six
delivered from authorized local agent of the manufacturer (Berger Hundred Thousand
jhilik synthetic enamel/Elite quick drying/Asian decora synthetic and Fifty Four
enamel or equivalent brand) in a sealed container, having high point Zero Hundred
water resistance, high bondibility, flexibility property; using specified Zero One and
brand thinner applying to metallic or wooden surface by Ninety-
brass/roller/spray in 2 coats over single coat anti-corrosive coating Two point
including cleaning, drying, making free from dirt, grease, wax, Four Four
Three
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 54/63
11/2/21, 11:23 AM Individual Report
removing all chalked and scaled materials, all complete in all floors
and accepted by the Engineer-in-charge.
38 mm thick Artificial Patent Stone (1:2:4) flooring with cement, best One Lakh
quality coarse sand (100% quantity of sylhet sand of F.M. 2.2 ) and Five
Five
12 mm down well graded stone chips, laying the concrete in Thousand
Hundred
24 N/A N/A alternate panels, compacting and finishing the top with neat cement m2 210.800 500.001 105400.211 Four
point Zero
and curing at least for 7 days in all floors including cost of water, Hundred
Zero One
electricity and other charges etc. All complete and accepted by the point Two
Engineer. One One
Two Lakh
On exterior surface applying as per manufacturer instruction Forty-One
specific coat of weather coat of approved qualityand colour Thousand
One
delivered from authorized local agent of the manufacturer in a One
Hundred
sealed container. Applying one vertical and one horizontal coat for Hundred
and
25 N/A N/A each coat and successive coat is to be applied after drying up of m2 1339.680 180.001 241143.740 and
Eighty
previous coat by brush/roller/spray in/c cleaning, washing, rubbing, Forty-
point Zero
as necessary and sand papering the surface and necessary Three
Zero One
scaffolding, etc. all complete for all floors i/c cost of all materials as point
per direction of the E-I-C. (BERGER/RAK/ELITE) Seven
Four
Thirty-
Seven
Thousand
Apron of 300mm widthover one layer of brick flat soling. The Two
Eight
surface having minimum 12mm thick cement sand (F.M.12) plaster Hundred
Hundred
26 N/A N/A (1.3) and net cement finiching with curing at sand (F.M 0.8) m2 46.560 800.001 37248.047 and
point Zero
consolidating and dressing cost of water, electricity, other charges Forty-
Zero One
etc.all complete as per d and accepet by the Engineer in charge. Eight
point Zero
Four
Seven
Fifty
Plaster rule pointing works 250mmx75mm size as brick shape by Thousand
10mmx10mm grove on outside wall over minimum 12mm thick One Three
cement plaster (1:6) with Portland Composite cement (CEM II/AM, Hundred Hundred
27 N/A N/A 42.5N), best quality sand (minimum FM1.2), finishing the corners m2 335.840 150.001 and Fifty 50376.336 and
and edges including washing of sand, cleaning the surfaces. point Zero Seventy-
caffolding and curing for requisite period etc. all complete as per Zero One Six point
drawing and direction of the E-I-C. Three
Three Six
Zero point
B. N/A N/A Sanitary & Plumbing Work's (All the items include VAT & profit) : N/A 0.001 0.001 Zero Zero 0.000 Zero
One
Zero point
Sanitary Fittings with Fixures & Plumbing Work's (All the items
B1. N/A N/A N/A 0.001 0.001 Zero Zero 0.000 Zero
include VAT & profit) :
One
28 N/A N/A Supplying, fitting and fixing Bangladesh pattern, 570mm x 445mm x Each 32.000 1500.001 One 48000.032 Forty-
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 55/63
11/2/21, 11:23 AM Individual Report
290mm long pan with foot-rest, approx 12 kg by weight, made of Thousand Eight
Vitreous China and preparing the base of pan with cement motor Five Thousand
(1:4) and with wire net of rods, if necessary in all floor including Hundred point Zero
making holes wherever required and mending good the damages point Zero Three
and fitting , fixing, finishing etc. complete with all necessary fittings Zero One Two
and connection approved and accepted by the Engineer-in-Charge.
White (RAK/STELLA)
33 N/A N/A Supplying, fitting and fixing medium best qualiy CP Piller cock etc. Each 32.000 800.001 Eight 25600.032 Twenty-
all complete as approved and accepted by the Engineer. 12 mm CP Hundred Five
medium quality piller cock point Zero Thousand
Zero One Six
Hundred
point Zero
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 56/63
11/2/21, 11:23 AM Individual Report
Three
Two
Seven Fifty-Six
Supplying, fitting and fixing best quality faucets etc. complete
Hundred Thousand
34 N/A N/A approved and accepted by the Engineer in charge. 12 mm CP bib Nos. 80.000 700.001 56000.080
point Zero point Zero
cock.
Zero One Eight
Forty-
Three
Supplying, fitting and fixing Special/Fancy quality CP Nine Thousand
concealed/Surface Angle stop cock etc. complete approved and Hundred Two
35 N/A N/A Each 48.000 900.001 43200.048
accepted by the Engineer in charge 12 mm CP surface mounted point Zero Hundred
angle stop cock (general) Zero One point Zero
Four
Eight
Sixteen
Supplying fitting and fixing 100mm dia uPVCTrap (Siphon or 'P' Five
Thousand
Trap) including making holes in walls and floors and mending good Hundred
36 N/A N/A Each 32.000 500.001 16000.032 point Zero
the damages etc. all complete as per direction of the Engineer-in- point Zero
Three
Charge. Zero One
Two
Twelve
Supplying, fitting and fixing of 125 mm dia stainless steel floor Two Thousand
Gratings in traps or in drains with cement morter (1:4) including Hundred Eight
37 N/A N/A Each 64.000 200.001 12800.064
making holes in walls and floors and mending good the damages point Zero Hundred
etc. all complete as per direction of the engineer-in-Charge. Zero One point Zero
Six Four
Twenty-
Five
Supplying, fitting and fixing super quality 600 x 125 mm white glass
Eight Thousand
(plate) shelf having 5 mm thickness with fancy C.P. brackets,
Hundred Six
39 N/A N/A screws and frames including making holes in walls and mending Each 32.000 800.001 25600.032
point Zero Hundred
good the damages with cement mortar (1:4) etc. all complete
Zero One point Zero
approved and accepted by the Engineer-in-Charge.
Three
Two
Thirty-
One Eight
Supplying, fitting and fixing of eco friendly, fire retardant, moisture,
Thousand Thousand
termite and borer proof uPVC non-shirnkable/ non-expandable Light
Two Four
40 N/A N/A peach colored cat door (2'-6, x 2'-4,) with frame to be utilized below Each 32.000 1200.001 38400.032
Hundred Hundred
cabinet basin and top of false slab. All complete as per instruction of
point Zero point Zero
the Engineer in charge.
Zero One Three
Two
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 57/63
11/2/21, 11:23 AM Individual Report
Nine
Thousand
Supplying, fitting and fixing standard size soap tray including Two
Six
making holes in walls and mending good the damages with cement Hundred
43 N/A N/A Each 48.000 200.001 9600.048 Hundred
mortar (1:4) etc. all complete approved and accepted by the point Zero
point Zero
Engineer-in-Charge. CP soap tray Zero One
Four
Eight
Twelve
Eight Thousand
Supplying and fitting-fixing of push shower in disabled toilet
Hundred Eight
44 N/A N/A including holder etc. all complete as per acceptance and approval of Each 16.000 800.001 12800.016
point Zero Hundred
the Engineer in charge.
Zero One point Zero
One Six
Fourteen
Supplying, fitting and fixing of standard porcelain toilet paper holder Thousand
Three
of 150 mm x 150 mm x 126 mm size including making drills in walls Four
Hundred
45 N/A N/A and mending good the damages with cement mortar (1:4) etc. all Each 48.000 300.001 14400.048 Hundred
point Zero
complete approved and accepted by the Engineer- in- charge. Light point Zero
Zero One
Colored Four
Eight
Zero point
B2. N/A N/A Construction of Two Soak well N/A 0.001 0.001 Zero Zero 0.000 Zero
One
Two
a)RCC Ring for Soak well (inner dia. Of ring 750 mm, thickness 30 Twenty
Hundred
mm, height 300 mm, using 3-12 no. MS wire ) all complete as per Thousand
46(a) N/A N/A Nos. 80.000 250.001 and Fifty 20000.080
DPHE National Sanitation Project design and as per direction of the point Zero
point Zero
Engineer in Charge. Eight
Zero One
46(b) N/A N/A b)RCC Slab for Soak well (dia. 900 mm, thickness 38 mm, using 10 Nos. 16.000 300.001 Three 4800.016 Four
no. MS wire of 0.65 kg) all complete as per DPHE National Hundred Thousand
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 58/63
11/2/21, 11:23 AM Individual Report
Sanitation Project design and as per direction of the Engineer in point Zero Eight
Charge. Zero One Hundred
point Zero
One Six
Nine
c)Earth work excavation, carrying, fitting & fixing of Soak well ring Six Thousand
and slab at proper position, earth filling, connection to the Litch pit Hundred Six
46(c) N/A N/A item 16.000 600.001 9600.016
(using 100 mm PVC pipe) etc. all complete as per direction of the point Zero Hundred
Enginner in charge. Zero One point Zero
One Six
One
One Thousand
Hundred Nine
d)Filling of soak well bottom by local sand (min. F.M. 0.8 & 75 mm
and Hundred
46(d) N/A N/A thick) and Brick chips (75 mm thick) with proper compaction etc. all item 16.000 120.001 1920.016
Twenty and
complete as per direction of the Engineer in Charge.
point Zero Twenty
Zero One point Zero
One Six
Zero point
B3. N/A N/A Other Sanitary Items N/A 0.001 0.001 Zero Zero 0.000 Zero
One
Four
Three Thousand
(a) Supplying, fitting, fixing and placing plastic covered waste bin Hundred Eight
47(a) N/A N/A Each 16.000 300.001 4800.016
(Medium Size) as per direction of Engineer in charge. point Zero Hundred
Zero One point Zero
One Six
Two
Thousand
Fifty point Four
(b) Supplying and placing of open waste plastic
47(b) N/A N/A Each 48.000 50.001 Zero Zero 2400.048 Hundred
(RFL/Bengal/Partex) basket (Jhuri) to be used in toilets.
One point Zero
Four
Eight
Two
Thousand
Fifty point Four
Supply of water pot (RFL/Bengal/standard quality) as per direction
48 N/A N/A Each 48.000 50.001 Zero Zero 2400.048 Hundred
of Engineer in charge.
One point Zero
Four
Eight
49 N/A N/A Supply of cleaning materials (Harpic/Finish/standard quality) 750 ml Each 48.000 100.001 One 4800.048 Four
each as per direction of Engineer in charge. Hundred Thousand
point Zero Eight
Zero One Hundred
point Zero
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 59/63
11/2/21, 11:23 AM Individual Report
Four
Eight
Three
Thousand
Eight
Eighty
Supply of cleaning brush (standard size and quality) as per direction Hundred
50 N/A N/A Each 48.000 80.001 point Zero 3840.048
of Engineer in charge. and Forty
Zero One
point Zero
Four
Eight
Two
One Thousand
Hundred Eight
Supply of Bucket (RFL/Bengal/standard quality) as per direction of and Hundred
51 N/A N/A Each 16.000 180.001 2880.016
Engineer in charge (Each 10 litre capacity). Eighty and
point Zero Eighty
Zero One point Zero
One Six
Six
Four Thousand
Supplying a lock (2.5, Tricle China, Brass colour or Pitol) to use in Hundred Four
52 N/A N/A Each 16.000 400.001 6400.016
the collapsible gate as per direction of the Engineer in charge. point Zero Hundred
Zero One point Zero
One Six
Four
Three Thousand
Supplying and placing of Coconut Fiber Matress (4'x10,) to be used Hundred Eight
53 N/A N/A Each 16.000 300.001 4800.016
on entrance stair step point Zero Hundred
Zero One point Zero
One Six
Zero point
C. N/A N/A INTERNAL ELECTRIFICATION (All the items include VAT & profit) : N/A 0.001 0.001 Zero Zero 0.000 Zero
One
54(a) N/A N/A (a) 20mm dia, 1.5mm Thick PVC pipe for concealed conduit m 280.000 25.001 Twenty- 7000.280 Seven
Five point Thousand
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 60/63
11/2/21, 11:23 AM Individual Report
Zero Zero point Two
One Eight
Fourteen
Fifty point
(b) Double core bangladeshi standard quality insulated electric wire Thousand
54(b) N/A N/A m 280.000 50.001 Zero Zero 14000.280
(3/20) (Estern/BRB/Paradise) for internal connection point Two
One
Eight
Seven
Thousand
Nine
Ninety Hundred
54(c) N/A N/A (c) Light point in/c holder Point 88.000 90.001 point Zero 7920.088 and
Zero One Twenty
point Zero
Eight
Eight
Twenty-
Six
Three Thousand
Hundred Four
54(d) N/A N/A (d) 26 Watt. Energy Saver Bulb (Phillips/ Energy Pack) Point 88.000 300.001 26400.088
point Zero Hundred
Zero One point Zero
Eight
Eight
Four
Five
Thousand
(e) 2-pin 5 amp Socket point (outlet) with control switch on switch Hundred
54(e) N/A N/A Point 8.000 500.001 4000.008 point Zero
board point Zero
Zero
Zero One
Eight
GANG SWITCH: Supplying ,fixing & fitting etc. all complete using
250 volts. 5 amps (minimum) concealed type following switch / Sixteen
Five
switch socket mounted on required size 18 SWG galvanized plain Thousand
Hundred
56 N/A N/A sheet board of 76.2 mm (3,) depth all electrical contact shall be Nos. 32.000 500.001 16000.032 point Zero
point Zero
brass / copper gang switch of following brand & country of origin. Three
Zero One
(MK England or equivalent product as approved by the Engineering Two
in charge. 4 Gang switch
57 N/A N/A Supply and wiring Electric wire (20) (Estern/BRB/Equivalent) for m 120.000 250.001 Two 30000.120 Thirty
connection with electric service from existing Main board to SDB Hundred Thousand
including trial operation and commissioning etc. all complete as per and Fifty point One
as per standard practice and accepted by the Engineer in charge. Two
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 61/63
11/2/21, 11:23 AM Individual Report
point Zero
Zero One
Zero point
D. N/A N/A Running water supply (Plumbing Works) N/A 0.001 0.001 Zero Zero 0.000 Zero
One
Making plumbing line with special grade / thread uPVC pipe 'E'
Zero point
class all according to BS-3505,1968 including supplying necessary
58 N/A N/A N/A 0.001 0.001 Zero Zero 0.000 Zero
clamps,screws, royal plug ,El-bow, bends, Tees etc. all complete as
One
per specifications and direction of the Engineer in charge.
Six
Thousand
Eighty
Four
58(a) N/A N/A a)25 mm dia. m 80.000 80.001 point Zero 6400.080
Hundred
Zero One
point Zero
Eight
Twenty-
One
Sixty Thousand
58(b) N/A N/A b)19 mm dia. m 360.000 60.001 point Zero 21600.360 Six
Zero One Hundred
point
Three Six
Three
Thousand
Four
Supplying, fitting and fixing best quality G.I. gate valve with sealant Two
Hundred
59 N/A N/A etc. complete approved and accepted by the Engineer in charge. 25 Nos. 8.000 400.001 3200.008 Hundred
point Zero
mm brass gate valve point Zero
Zero One
Zero
Eight
Zero point
E. N/A N/A Others N/A 0.001 0.001 Zero Zero 0.000 Zero
One
https://www.eprocure.gov.bd/officer/IndReport.jsp?tenderId=608231&formId=3478774 62/63