Professional Documents
Culture Documents
UNIT II
SPACE SEGMENT
PART – A
(Most important questions are in Bold)
1. What is a transponder?
2. Write short notes on station keeping. (AU Nov/Dec 2010)
3. What is meant by momentum wheel stabilization? (AU April / May ’08)
4. What is meant by Intermodulation noise? (AU Nov/Dec 2009, AU May/June 2009), (AU Nov/Dec
2012)
5. Define input back off. (AU April/ May ’08)
6. Define EIRP.
7. What are the types of losses in satellite communication? (AU Nov/Dec 2010)
8. A satellite downlink at 12GHZ operates with a transmit power of 6w & an antenna gain of 48.2db.
Calculate the EIRP in dBW. (AU May/June 2009)
9. What is meant by antenna noise temperature and system noise temperature? (AU Nov/Dec 2012)
10. What is the role of TT & C subsystem?
11. Why Fuel Estimation has to be done while launching satellite?
12. What is the need for thermal control and propulsion? (AU Nov/Dec 2013)
13. List some antennas used in the communication sub system of space craft. (AU May/June ’12)
14. What is noise figure? (AU Nov/Dec 2009)
15. The range between ground station and a satellite is 42000km. Calculate the free space loss at a frequency
of 6GHz. (AU Apr/May 2010)
16. A LNA is a connected to a receiver which has a noise figure of 12dB. The gain of LNA is 30dB and its
noise temperature is 120K. Calculate the overall noise temperature referred to the LNA input. (AU
Apr/May 2010)
17. Calculate the gain in dB of a 5 meter paraboloidal antenna operating at 12 GHz. Assume an aperture
efficiency of 0.55. (AU Apr/May 2011)
18. Why is noise temperature a useful concept in communication receiver. (AU April 2014)
19. Write the objectives with which the down link of any satellite communication systems must be designed.
(AU April 2014)
20. For a given satellite and signal transmission, What are the earth station parameters affecting the C/N ratio.
(AU April 2014)
PART – B & C
****