Professional Documents
Culture Documents
Maharaja Institute of Technology Mysore: f2 (A, B, C) (1, 3, 4, 6, 7) f2 (A, B, C) (2, 3, 5, 6)
Maharaja Institute of Technology Mysore: f2 (A, B, C) (1, 3, 4, 6, 7) f2 (A, B, C) (2, 3, 5, 6)
b. f1(a, b, c) = ∑ (0, 5, 7)
f2 (a, b, c) = ∑ (2, 3, 5, 6)
OR
Explain how a carry look-ahead adder can generate the carry status
2. a. required by all the stages of full adder so that the ripple effect is 7 CO1 L2
eliminated.
By applying suitable principles of Digital System Design, implement a
priority encoder with four inputs, with the MSB having highest priority
b. encoding to 01, the (MSB-1) having next priority encoding to 10, the 8 CO3 L3
(MSB-2) having next priority encoding to 11, while the LSB with the least
priority encoding to 00.
MODULE-2
By applying suitable principles of Digital System Design, implement a 3-
3. a. 8 CO3 L3
bit binary to gray code converter using 4:1 multiplexer.
By applying suitable principles of Digital System Design, implement a
b. sequential circuit that senses the debouncing action of a switch using 7 CO3 L3
S R latch.
OR
By applying suitable principles of Digital System Design, implement
the following functions using an 8 to 1 line multiplexer where a, b, c are
4. a. connected to address lines a2, a1 and a0 respectively. 8 CO3 L3
f1(a, b, c, d) = ∑ (1, 2, 6, 7, 9, 11, 12, 14, 15)
f2 (a, b, c) = ∑ (2, 5, 6, 7, 9, 12, 13, 15)
By applying suitable principles of Digital System Design,
b. 7 CO3 L3
implement a 2-bit comparator using a 16:1 multiplexer.
Q. No
MAXIMUM MARKS ALLOTTED FOR Approved by Evaluation Committee:
CO1 CO2 CO3 CO4 CO5
1a 7
1b 8 Evaluation Committee
IA
2a 7 Coordinator NBA
HoD
Coordinator
2b 8
3a 8
3b 7
4a 8
4b 7
Total MARKS
ALLOTED PER 7 23
CO