Professional Documents
Culture Documents
Service News: Marine Marine
Service News: Marine Marine
: FSN180001A
MARINE Date : March 6, 2018
Person in-charge :
H. Otsuki, Manager
Marine Communication Group
Engineering Department
Marine Electronics Division
Service News
X Information Request for work
Caution: Do Not connect DC - to GND when connecting a non-isolated type power supply
such as a battery.
If the IC in NCR-333/733 is damaged, the following phenomena of one or both will occur.
- NCR-333/733 display is blank.
- No message is output from NCR-333/733 to external equipment.
4.2 Information
- Until installation manuals revised, please refer to the attached documents for installing the equipment.
- When installing NBG-320/720 POWER SUPPLY UNIT, please connect DC - and GND terminal.
- After issuing the revised installation manuals, we will issue another service news again just to make it sure.
- With revision of the installation manuals, the following contents will be also revised:
· Addition of NKG-901 Optional Printer
· 1-42 page: Addition of Detail View to the Exploded Diagram
The following revised installation manuals will be issued later on with the revision code, including this document content.
Name Current Code => Revision Code
[A] NCR-333 Installation Manual (Eng.) : 7ZPJD0342B => 7ZPJD0342C
[B] NCR-333 Installation Manual (Jpn.) : 7ZPJD0343B => 7ZPJD0343C
[C] NCR-733 Installation Manual (Jpn.) : 7ZPJD0458A => 7ZPJD0458B