A Ground to 14th Floor 1 Granite Stone Labour charge for fixing machine cut/machine pre-polished 16 mm thick of approved Colour and shade Granite kitchen platform, granite facia, granite edge rounding / chamfering and polishing at all levels. Laying / fix with approved adhesive to facilitate fixing of kitchen counter granite on moisture resistant ply board. Rate to include cutting of hole for fixing of SS sink and passing of gas/utility pipe/RO supply pipe. Also rates are inclusive of fixing of 1.1 sink of size 915mmX485mmX200mm at proper line & level. Length of the Sqm. granite shall be equal in case the joint is unavoidable at single side. 900 Protection is to be provided after completion of said job. Granite will be provided FOC of random size. Granite ,matching pigment , cement, sand, protection material, cleaning cloth/dhoti, water, electricity will be provided free of cost. Material will be available within / near project area. Material loading & unloading will be done by vendor. Allowable wastage : Cement – 3%, sand – 10%, Granite – 10% Labour charge for laying in position to pattern 16mm thick prepolished Granite stone Cladding to walls, columns and other vertical faces like lift facia at all levels, laid over a backing of 20-22 mm thick cement mortar 1:4, Cement mortar admixed with non shrinkage compound i.e cebex-100 (1packet 227gms per bag of cement) including providing necessary holes to receive metal fixing cramps etc (if required),complete in all respect. Granite will be provided of random slab. Rate to include fixing grit on the back of stone with Araldite for proper bonding & Including filling of all joints with Araldite, colour matching to granite shade, making nosing, grooves, pointing, polishing, hacking on soffit only etc wherever required, scaffolding, curing surface cleaning etc , complete as per drawing. , methodology, drawings and as directed by Engineer In Charge. 4.2 Rate including edge chamfering/grinding, complete as per specification and Sqm. drawing. Protection (if required) to the finished surface with approved 1,000 protective sheet/or any other means etc all complete as per drawings, technical specifications and as directed by the Engineer in charge. The acceptance criteria for granite works shall be as per technical specification and Approved method Statement. No hollowness will be permited for granite work when check with hard object / tool. Granite shall be tested in accordance with approved ITP and IS 14223.Granite ,matching pigment, araldite-cladding , cement, sand, protection material, cleaning cloth/dhoti, water, electricity will be provided free of cost. Material will be available within / near project area. Material loading & unloading will be done by vendor. Allowable wastage : Cement – 3%, sand – 10%, Granite – 10% Labour Charge for fixing 16mm thick prepolished granite at all levels ( to be provided FOC of ramdom slab) in strips/cills/soffits/jambs/ledges etc of approved quality in specifed size as per drawing laid over 15-20 mm avg thickness of cement mortar 1:4 (1cement : 4 coarse sand) base along with rich cement slurry. The item includes chamfering, pointing, edge polishing, rubbing, surface cleaning, polishing etc wherever required. Work shall be executed and paid for as per the approved sample. Protection (if required) to the finished surface with approved protective sheet/or any other means etc 4.3 all complete as per drawings, technical specifications and as directed by the Engineer in charge. The acceptance criteria for granite works shall be as per technical specification & approved method Statement. No hollowness will be Sqm. 1,100 permited for granite work when check with hard object / tool. Granite shall be tested in accordance with apoved ITP and IS 14223. For wet area colour pigment should be epoxy based. Location : window, kitchen, toilet cill, etc. Granite ,matching pigment, cement, sand , protection material, cleaning cloth/dhoti, water, electricity will be provided free of cost. Material will be available within / near project area. Material loading & unloading will be done by vendor. Allowable wastage : Cement – 3%, sand – 10%, Granite – 10% 1 B From 15th to 20th Floor S. No. DESCRIPTION UNIT Rate Labour charge for fixing machine cut/machine pre-polished 16 mm thick of approved Colour and shade Granite kitchen platform, granite facia, granite edge rounding / chamfering and polishing at all levels. Laying / fix with approved adhesive to facilitate fixing of kitchen counter granite on moisture resistant ply board. Rate to include cutting of hole for fixing of SS sink and passing of gas/utility pipe/RO supply pipe. Also rates are inclusive of fixing of sink of size 915mmX485mmX200mm at proper line & level. Length of the 4.1 granite shall be equal in case the joint is unavoidable at single side. Sqm. Protection is to be provided after completion of said job. Granite will be 1,05 provided FOC of random size. 0 Granite ,matching pigment , cement, sand, protection material, cleaning cloth/dhoti, water, electricity will be provided free of cost. Material will be available within / near project area. Material loading & unloading will be done by vendor. Allowable wastage : Cement – 3%, sand – 10%, Granite – 10% Labour charge for laying in position to pattern 16mm thick prepolished Granite stone Cladding to walls, columns and other vertical faces like lift facia at all levels, laid over a backing of 20-22 mm thick cement mortar 1:4, Cement mortar admixed with non shrinkage compound i.e cebex-100 (1packet 227gms per bag of cement) including providing necessary holes to receive metal fixing cramps etc (if required),complete in all respect. Granite will be provided of random slab. Rate to include fixing grit on the back of stone with Araldite for proper bonding & Including filling of all joints with Araldite, colour matching to granite shade, making nosing, grooves, pointing, polishing, hacking on soffit only etc 4.2 wherever required, scaffolding, curing surface cleaning etc , complete as per drawing. , methodology, drawings and as directed by Engineer In Charge. Sqm. Rate including edge chamfering/grinding, complete as per specification and drawing. Protection (if required) to the finished surface with approved 1,00 protective sheet/or any other means etc all complete as per drawings, 0 technical specifications and as directed by the Engineer in charge. The acceptance criteria for granite works shall be as per technical specification and Approved method Statement. No hollowness will be permited for granite work when check with hard object / tool. Granite shall be tested in accordance with approved ITP and IS 14223. Granite ,matching pigment, araldite-cladding , cement, sand, protection material, cleaning cloth/dhoti, water, electricity will be provided free of cost. Material will be available within / near project area. Material loading & unloading will be done by vendor. Allowable wastage : Cement – 3%, sand – 10%, Granite – 10% Labour Charge for fixing 16mm thick prepolished granite at all levels ( to be provided FOC of ramdom slab) in strips/cills/soffits/jambs/ledges etc of approved quality in specifed size as per drawing laid over 15-20 mm avg thickness of cement mortar 1:4 (1cement : 4 coarse sand) base along with rich cement slurry. The item includes chamfering, pointing, edge polishing, rubbing, surface cleaning, polishing etc wherever required. Work shall be executed and paid for as per the approved sample. Protection (if required) to the finished surface with approved protective sheet/or any other means etc 4.3 all complete as per drawings, technical specifications and as directed by the Engineer in charge. The acceptance criteria for granite works shall be as per technical specification & approved method Statement. No hollowness will be Sqm. 1,10 permited for granite work when check with hard object / tool. Granite shall be 0 tested in accordance with apoved ITP and IS 14223. For wet area colour pigment should be epoxy based. Location : window, kitchen, toilet cill, etc. Granite ,matching pigment, cement, sand , protection material, cleaning cloth/dhoti, water, electricity will be provided free of cost. Material will be available within / near project area. Material loading & unloading will be done by vendor. Allowable wastage : Cement – 3%, sand – 10%, Granite – 10% 2 C From 21st to 26th Floor S. No. DESCRIPTION UNIT Rate Labour charge for fixing machine cut/machine pre-polished 16 mm thick of approved Colour and shade Granite kitchen platform, granite facia, granite edge rounding / chamfering and polishing at all levels. Laying / fix with approved adhesive to facilitate fixing of kitchen counter granite on moisture resistant ply board. Rate to include cutting of hole for fixing of SS sink and passing of gas/utility pipe/RO supply pipe. Also rates are inclusive of fixing of sink of size 915mmX485mmX200mm at proper line & level. Length of the 4.1 granite shall be equal in case the joint is unavoidable at single side. Sqm. Protection is to be provided after completion of said job. Granite will be 1,06 provided FOC of random size. 9 Granite ,matching pigment , cement, sand, protection material, cleaning cloth/dhoti, water, electricity will be provided free of cost. Material will be available within / near project area. Material loading & unloading will be done by vendor. Allowable wastage : Cement – 3%, sand – 10%, Granite – 10% Labour charge for laying in position to pattern 16mm thick prepolished Granite stone Cladding to walls, columns and other vertical faces like lift facia at all levels, laid over a backing of 20-22 mm thick cement mortar 1:4, Cement mortar admixed with non shrinkage compound i.e cebex-100 (1packet 227gms per bag of cement) including providing necessary holes to receive metal fixing cramps etc (if required),complete in all respect. Granite will be provided of random slab. Rate to include fixing grit on the back of stone with Araldite for proper bonding & Including filling of all joints with Araldite, colour matching to granite shade, making nosing, grooves, pointing, polishing, hacking on soffit only etc wherever required, scaffolding, curing surface cleaning etc , complete as per 4.2 drawing. , methodology, drawings and as directed by Engineer In Charge. Sqm. Rate including edge chamfering/grinding, complete as per specification and drawing. Protection (if required) to the finished surface with approved 1,11 protective sheet/or any other means etc all complete as per drawings, 9 technical specifications and as directed by the Engineer in charge. The acceptance criteria for granite works shall be as per technical specification and Approved method Statement. No hollowness will be permited for granite work when check with hard object / tool. Granite shall be tested in accordance with approved ITP and IS 14223. Granite ,matching pigment, araldite-cladding , cement, sand, protection material, cleaning cloth/dhoti, water, electricity will be provided free of cost. Material will be available within / near project area. Material loading & unloading will be done by vendor. Allowable wastage : Cement – 3%, sand – 10%, Granite – 10% Labour Charge for fixing 16mm thick prepolished granite at all levels ( to be provided FOC of ramdom slab) in strips/cills/soffits/jambs/ledges etc of approved quality in specifed size as per drawing laid over 15-20 mm avg thickness of cement mortar 1:4 (1cement : 4 coarse sand) base along with rich cement slurry. The item includes chamfering, pointing, edge polishing, rubbing, surface cleaning, polishing etc wherever required. Work shall be executed and paid for as per the approved sample. Protection (if required) to the finished surface with approved protective sheet/or any other means etc 4.3 all complete as per drawings, technical specifications and as directed by the Engineer in charge. The acceptance criteria for granite works shall be as per technical specification & approved method Statement. No hollowness will be Sqm. 1,369 permited for granite work when check with hard object / tool. Granite shall be tested in accordance with apoved ITP and IS 14223. For wet area colour pigment should be epoxy based. Location : window, kitchen, toilet cill, etc. Granite ,matching pigment, cement, sand , protection material, cleaning cloth/dhoti, water, electricity will be provided free of cost. Material will be available within / near project area. Material loading & unloading will be done by vendor. Allowable wastage : Cement – 3%, sand – 10%, Granite – 10% Note :- All above pricess are inclusive of labor cess only GST will be paid extra as per prevailing norms 3