Professional Documents
Culture Documents
Permission to proceed does not constitute acceptance or approval of design details, calculations,
analysis, test methods, or materials developed or selected by the Third Party and does not relieve the
Third Party from full compliance with contractual obligations.
Security Classification:
WND Project Internal
Purchase Order Title Raven and Giza Fayoum LV Switchgear, LV Bus Duct and Harmonic Filters
Project Document Title Schematic Diagram Type = ( H1 ) <=22kW / 25A Motor Starter Feeder
INFORMATION CONFIDENTIAL AND/OR PROPRIETARY TO BP THAT IS NOT TO BE USED, DISCLOSED, OR REPRODUCED IN ANY FORM BY ANY PERSON OR ENTITY OTHER THAN BP WITHOUT BP’S PRIOR WRITTEN PERMISSION.
ALL RIGHTS RESERVED. NOTICE: THESE MATERIALS ARE THE WORK PRODUCT OF BECHTEL. BECHTEL ACCEPTS NO LIABILITY FOR ANY RELIANCE BY ANY PERSON OTHER THAN ITS CLIENT, BP, ON THE CONTENT OF THIS
ELECTRONIC DOCUMENTS ARE CONTROLLED. ANY PRINTED COPY WILL BE UNCONTROLLED AND MAY BECOME OUTDATED
B
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées. are in open position, drawn out with operating m echanism discharged and all power sources off.
A
B
C
Ind
1
Date
18-07-2017 First issue
Modification
28-02-2018
AS MANUFACTURED SCHEMATICS
3
Name
HANY M.
HANY M.
HANY M.
4
Drawn
Visa
Name
SARAH M.
SARAH M.
SARAH M.
Checked
5
Visa
Name
A. SALEH
A. SALEH
A. SALEH
Approved
Visa
6
Archiv.
Scale
Department
Order No.
ITEM No.
PROJECT
DOC. NO.
7
SEE
:
25
ITEM NAME :
H1 - 690V
CUSTOMER :
BECHTEL
E116033.01
:
WEST NILE DELTA-(WND)
:
EG001-11EV2AES00-C03-0040
Drawing No.
9
32360565
10
Index
TYPE = ( H1 ) - 4-WIRE
FEEDER CONTACTOR
SCHEMATIC DIAGRAM
Sheet
01 / 24
1 2 3 4 5 6 7 8 9 10
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
01 FRONT PAGE
A B C
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
02 SUMMARY PAGE
A B C
03 GENERAL LEGEND
A B C
04 GENERAL LEGEND
A B C
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
are in open position, drawn out with operating m echanism discharged and all power sources off.
A
A
05 GENERAL LEGEND
A B C
06 ABBREVIATION
A B C
07 ABBREVIATION
A B C
B
B
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C
C
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
D
D
CUSTOMER
: BECHTEL
PROJECT
: WEST NILE DELTA-(WND)
SUMMARY PAGE
ITEM No.
: 25
ITEM NAME
: H1 - 690V
DOC. NO.
: EG001-11EV2AES00-C03-0040 32360565 C 02
/ 24
1 2 3 4 5 6 7 8 9 10
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
A
A
MICROPROCESSOR BASED
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
BREAK CONTACTS
BREAK CONTACTS
B
ON DELAY AUX.CONTACTS
B
SWITCH-DISCONNECTOR
DIGITAL VOLTMETER
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
A
ANALOGUE AMMETER
1 2
CONTACTOR 2 POSITION SELECTOR SWITCH
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C
102 C
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
1 0 2
WITH KEY
POTENTIAL TRANSFORMER
HUMAN MACHINE INTERFACE (LTMCU)
PUSH-BUTTON WITH
DISPLAY
D D
GENERAL LEGEND
CUSTOMER
: BECHTEL
1 2 3 4 5 6 7 8 9 10
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
A
A
Ph
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
are in open position, drawn out with operating m echanism discharged and all power sources off.
ELECTROMAGNETIC RELAY
FLAG INDICATOR
ELECTROMAGNETIC RELAY
CHANGE-OVER CONTACT
SIGNAL LAMP
OF
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
TH
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C
C
MEASURING RELAY
OR RELATED DEVICE
CT
PF
D
D
GENERAL LEGEND
CUSTOMER
: BECHTEL
D
C
B
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées. are in open position, drawn out with operating m echanism discharged and all power sources off.
A
B
C
1
Ind.
Date
18-07-2017
15-10-2017
28-02-2018
SYMBOL
First issue
Modification
FAN
DIODE
2
OR DC }
CUSTOMER MODIFICATION
RJ45 SOCKET
CONTROL M.C.B.
CONTROL FUSE
AS MANUFACTURED SCHEMATICS
TERMINAL BLOCK
DESCRIPTION
Archiv.
Ind.
MECHANICAL INTERLOCK
MEASURING TRANSDUCER
3
Date
MOTOR OPERATED MECHANISM
Modification
TEST SOCKET { CURRENT OR VOLTAGE
C1 NO1 C2 NO2
Hygrostat
86
L
SYMBOL
Archiv.
BUS DUCT
HYGROSTAT
TIMER (0.1--3Sec.)
GENERAL LEGEND
DESCRIPTION
6
ITEM
ITEM
DOC. NO.
:
NAME :
:
PROJECT
:
CUSTOMER
:
25
H1 - 690V
BECHTEL
EG001-11EV2AES00-C03-0040
SYMBOL
8
9
DESCRIPTION
Order No.
Drawing No.
32360565
C
10
E116033.01
Index Sheet
05 / 24
1 2 3 4 5 6 7 8 9 10
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
A A
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
are in open position, drawn out with operating m echanism discharged and all power sources off.
VBP ON/OFF PUSHBUTTON LOCKING FOR NW CIRCUIT BREAKER CTB CURRENT TEST BOX
MN UNDER VOLTAGE RELEASE FOR NW CIRCUIT BREAKER PTB POLARITY TEST BOX FOR DC TRIPPING
B
B
CE CONNECTED POSITION INDICATION FOR NW CIRCUIT BREAKER XF CLOSING COIL FOR NW CIRCUIT BREAKER
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
FA MICOM
D D
ABBREVIATION
CUSTOMER
: BECHTEL
D
C
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées. are in open position, drawn out with operating m echanism discharged and all power sources off.
A
B
C
1
Ind.
Date
18-07-2017
15-10-2017
28-02-2018
L/R
AC OK
DC OK
VAM4C
VAM10L
VAMP321
First issue
Modification
I1 / I2 / BC / N
ABBREVIATION
TESYST (LTMR)
2
CUSTOMER MODIFICATION
AS MANUFACTURED SCHEMATICS
Archiv.
Ind.
DESCRIPTION
3
Date
LOCAL / REMOTE
230VAC OK LAMP
110VDC OK LAMP
Modification
( TRIP SELECTOR SWITCH )
Archiv.
INCOMING1/INCOMING2/BUS COUPLER/NORMAL
ABBREVIATION
ITEM
DOC. NO.
:
ITEM NAME :
:
PROJECT
:
CUSTOMER
:
25
ABBREVIATION
H1 - 690V
BECHTEL
EG001-11EV2AES00-C03-0040
DESCRIPTION
8
9
Order No.
Drawing No.
32360565
C
10
E116033.01
Index Sheet
07 / 24
1 2 3 4 5 6 7 8 9 10
-X.SP.HEATER
AL1/BL1
BUS AL1/BL1
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
AL2/BL2
AL2/BL2
L1 230V AC L1
L
AL3/BL3
AL3/BL3
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
N N
N
-COLLECTOR3 L2 N2 -COLLECTOR4
A
-H1-1A
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
are in open position, drawn out with operating m echanism discharged and all power sources off.
BLOCK MODULE
2
4
6
4
2
FUSE
21
1 3 5 MONITOR
22
11
H1U2
2 4 6 -H1Q1FU1 LOCAL
REMOTE
LTMCU TESYS-T
03
13
14
1 0 2
-S1
RJ45
04 14
-S1
54
53
8 7 5 4 H1+230V
L1
63
-S2
B
L2 -KM2
B
H1 0V
12 14
64
22
22
21
21
-KM1
-STOP1
-H5 X1
11
-S2
1 3 5 22 24 HEATER
12 14
11
-START1
SUPPLY
ON
-KM1 X2
21
WHITE
2 4 6 53
-KS1
-KM2
54
1 3 5
23
-TESYS-O.2
61
-KM2
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
24
2 4 6
-TESYS-O.4
62
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
-KM1
L V1 L V2 L V3 A1 A2 I.1 C I.2 I.3 C I4 I5 C I.6 97 95 96
32 34
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
LOCAL
REMOTE
STOP
ESD
START
RJ45 98
50G
-KS1 31
4
TRIP
A
5
6 LTME
-H1U1
C 7
33 23 13
C
LTMR TESYS-T
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
13
ALARM ENABLE RUN
22 24 22 24 22 24
-KM1
14
83 H1+230V
RD+
TD+
RD-
TD-
21
21 21
-KM2 H1 0V
84
B3 B4 24 21 22 19 9 10 11 12 13 14
B1 B2
T2
L1 L2 L3
-X.SP.HE*
1
2
TCP/IP
1 TRANSMISSION DATA +
PE PE
RJ45
6
2 TRANSMISSION DATA -
3
3 RECEPTION DATA +
HEATER
D
D
H1-2
ANTICON HEATER
TYPE-H1-2 SCHEMATIC-1
CUSTOMER
: BECHTEL
1 2 3 4 5 6 7 8 9 10
FAULT LOAD
LOAD
SPARE OFF STATUS FAULT ALARM SPARE
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
AVAILABLE
RUNNING IN REMOTE
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
-COLLECTOR1
-X1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
-X-TEST
A
A
L1
L1 L1
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
230V AC
L
are in open position, drawn out with operating m echanism discharged and all power sources off.
-H1-1B
N1
N N
N
A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 B9 B10
-COLLECTOR2
153 161
32 34 42 44 -KM1 33 -KM1 33
-H1-1A
-KF1 -KV1 154 -S1 162 -TESYS-O.3
L1
31 41 34
34
B7 B8
153
161
L2
1 3
154 162
FU.PT
2 4
0V 690
92 94
12 14
21
690/230V
32 34 42 44
13 97
-KF1
INSIDE SUBSTATION FIELD
-H1-1A
PT -KV1 -KF1
-KM2 -TESYS-O.4 -Q.SP1 91
11
22
-X2
42 44 -EPB1
31 41
14 98
1
230V KS
-KS1
SIS TRIP
TESYS 14 KS
B
TRIP O.4
A1 B
OV KS
41
-H1Q1FU1
LCS
2
11
1
23
12 14 24 22
-Q1
-KM1
-KM1
3
-KS2 FU.CE
24
BUTTON
-KS2
72
54
FU.2A 2
21
12 14
A3
11 21
43
1
3
-KM2
-KV1
4
-S1
22
12 14 11
A4
Q.PT
44
5
REMOTE
POSITION LIMIT
A5
(HEATER
11 -TESYS-O.1
SWITCH)
-H1SW1
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
2
4
6
14
TESYS O.1
A6
7
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
.A7
2 14 -KS2
A1
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
(HEATER
-H1SW2
--X.LSW
.A8
1
A2
9
13
23
33
43
-S2
-S2
-S2
-S2
-KS1 A1 A9
DRAWER SECURITY
UCP
C
(BLK)
C
10
14 24 34 44
STOP
LAMP TEST
A2
A10
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
73
H1+230V
KS
-KM2
11
H1+230V
N A1
74 A11
LTM9F
H1 0V
UCP
12
L A2
-KF1 A1
START
H1 0V
-START1
X1 X1 X1 X1
A1 A1 -KV1 A1 -KM1 A1 -KM2 A1 A12
X2 X2
X2 X2 A2 A2 A2 A2 A2
TRIP
CONTROL
CONTACTOR
CONTACTOR
SERVICE
NOTE:-
- IN THE ABSENCE OF SIS OR E-STOP TRIP SIGNALS ,
D
D
H1-2
- IN THE ABSENCE OF THERMOSTAT SIGNALS RELEVENT
TYPE-H1-2 SCHEMATIC-2
CUSTOMER
: BECHTEL
C
B
A
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées. are in open position, drawn out with operating m echanism discharged and all power sources off.
A
B
C
1
Ind.
H1-2
Date
18-07-2017
15-10-2017
28-02-2018
First issue
Modification
2
CUSTOMER MODIFICATION
AS MANUFACTURED SCHEMATICS
Archiv.
Ind.
3
Date
Modification
Ethernet Cable
FROM TESYS-T
Archiv.
SW-*
Eth2-IN
Eth1-OUT
4-WIRE
BY PASS
SWITCH WIRING
TCSES L043F23F
+24V DC
4
0V
-X.CONV-*(*)*
GND
+
Eth1-IN
Eth2-OUT
ITEM
Q.SW.*
-X.EARTH
DOC. NO.
:
ITEM NAME
:
:
PROJECT
:
CUSTOMER
:
25
+24VDC-I
0V
Ethernet Cable
H1 - 690V
Ethernet Cable
BECHTEL
TO NEXT MODULE
EG001-11EV2AES00-C03-0040
8
9
Order No.
Drawing No.
32360565
C
10
E116033.01
Index Sheet
10 / 24
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées. are in open position, drawn out with operating m echanism discharged and all power sources off.
A
B
C
1
Ind.
H1-2
Date
18-07-2017
15-10-2017
28-02-2018
First issue
Modification
2
CUSTOMER MODIFICATION
AS MANUFACTURED SCHEMATICS
Archiv.
Ind.
3
I.9
I.8
I.7
I.6
I.5
I.4
I.3
I.2
I.1
I.10
Date
LOGIC
INPUTS
LOCAL
Modification
REMOTE
RUN HEATER
KM1 RUNNING
STOP HEATER
HEATER AVAILABLE
DRAWER IN SERVICE
4
SERIAL COMMUNICATION
Archiv.
4-WIRE ASSIGNMENT
5
4-WIRE
----
----
----
----
----
----
O.4
O.3
O.2
O.1
TYPE-H1-2 SCHEMATIC-3
LOGIC
OUTPUTS
6
----
----
----
----
----
----
ITEM
DOC. NO.
:
ITEM NAME
:
:
PROJECT
:
CUSTOMER
:
FAULT SIGNAL
25
REMOTE ENABLE
WARNING SIGNAL
H1 - 690V
BECHTEL
EG001-11EV2AES00-C03-0040
4-WIRE ASSIGNMENT
8
9
Order No.
Drawing No.
32360565
C
10
E116033.01
Index Sheet
11 / 24
1 2 3 4 5 6 7 8 9 10
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
A
(I-1)
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
&
are in open position, drawn out with operating m echanism discharged and all power sources off.
(I-1)
>1
>1
&
(I-1)
RUN
B
B
LATCHED OUTPUT
HEATER SWITCH DISCONNECTOR CLOSED
FAULT (19)
& AVAILABILITY (I8)
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C
C
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
&
STOP
>1
(I10)
L/O/R IN REMOTE(I3)
&
>1
D
COMMUNICATION OR H.W SIGNAL
D
H1-2
TYPE-H1-2 SCHEMATIC-4
CUSTOMER
: BECHTEL
1 2 3 4 5 6 7 8 9 10
TERMINAL BLOCK
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
COMMENT SHEET
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
-X1
A A
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
FAULT
32360565/09-4
H1-2H1-1A/A13
are in open position, drawn out with operating m echanism discharged and all power sources off.
FAULT
32360565/09-4
H1-2H1-1A/A14
LOAD AVAILABLE
32360565/09-5
H1-2H1-1A/A15
LOAD AVAILABLE
32360565/09-5
H1-2H1-1A/A16
LOAD RUNNING
32360565/09-6
H1-2H1-1A/A17
LOAD RUNNING
32360565/09-6
H1-2H1-1A/A18
IN REMOTE
32360565/09-6
H1-2H1-1A/A19
IN REMOTE
32360565/09-7
H1-2H1-1A/A20
SPARE
32360565/09-7
H1-2H1-1A/A21
SPARE
32360565/09-7
H1-2H1-1A/A22
10
OFF STATUS
32360565/09-7
H1-2H1-1B/A23
11
OFF STATUS
32360565/09-8
H1-2H1-1B/A24
12
FAULT ALARM
32360565/09-8
H1-2H1-1B/B9
13
FAULT ALARM
32360565/09-8
H1-2H1-1B/B10
14
B
SPARE
32360565/09-8
B
15
SPARE
32360565/09-9
16
SPARE
32360565/09-9
17
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C C
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
D
D
H1-2
PROJECT
: WEST NILE DELTA-(WND)
ITEM
: 25
1 2 3 4 5 6 7 8 9 10
TERMINAL BLOCK
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
COMMENT SHEET
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
-X2
A A
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
SIS TRIP
32360565/09-9
H1-2H1-1A/A1
are in open position, drawn out with operating m echanism discharged and all power sources off.
SIS TRIP
32360565/09-9
H1-2H1-1A/A2
H1-2H1-1A/A3
NOTE:-
STOP PUSH BUTTON LCS CONTACT
32360565/09-9
H1-2H1-1A/A4
- IN THE ABSENCE OF SIS OR E-STOP TRIP SIGNALS ,
UCP STOP
32360565/09-9
H1-2H1-1A/A9
UCP STOP
32360565/09-9
H1-2H1-1A/A10
10
UCP START
32360565/09-9
H1-2H1-1A/A23
11
UCP START
32360565/09-9
H1-2H1-1A/A24
12
B B
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C C
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
D
D
H1-2
C
B
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées. are in open position, drawn out with operating m echanism discharged and all power sources off.
A
B
C
1
Ind.
H1-2
Date
18-07-2017
15-10-2017
28-02-2018
First issue
Modification
2
CUSTOMER MODIFICATION
AS MANUFACTURED SCHEMATICS
Archiv.
COMMENT
Ind.
ANTICON HEATER
ANTICON HEATER
Date
SHEET
Modification
32360565/08-9
32360565/08-10
Archiv.
H1-2H1-1B/2
H1-2H1-1B/1
-X.SP.HE*
TERMINAL BLOCK
ITEM
DOC. NO.
:
ITEM NAME
:
:
PROJECT
:
TERMINAL BLOCK : H1-2X.SP.HC
CUSTOMER
:
25
H1 - 690V
BECHTEL
EG001-11EV2AES00-C03-0040
8
9
Order No.
Drawing No.
32360565
C
10
E116033.01
Index Sheet
15 / 24
1 2 3 4 5 6 7 8 9 10
-X.SP.HEATER
AL1/BL1
BUS AL1/BL1
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
AL2/BL2
AL2/BL2
L1 230V AC L1
L
AL3/BL3
AL3/BL3
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
N N
N
-COLLECTOR3 L2 N2 -COLLECTOR4
A
-H1-1A
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
are in open position, drawn out with operating m echanism discharged and all power sources off.
BLOCK MODULE
2
4
6
4
2
21
FUSE
1
3
5
MONITOR
22
11
H1U2
2
4
6
LOCAL
REMOTE
LTMCU TESYS-T
03
13
14
1 0 2
-S1
RJ45
04 14
-S1
54
53
8 7 5 4
H1+230V
L1
63
-S2
B L2
-KM2
B
H1 0V
12 14
64
22
22
21
21
-KM1
-STOP1
-H5 X1
11
-S2
1
3
5
22 24 HEATER
12 14
11
-START1
SUPPLY ON
-KM1
X2
21
WHITE
2
4
6
53
-KS1
-KM2
54
1
3
5
23
-TESYS-O.2
61
-KM2
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
24
2
4
6
-TESYS-O.4
62
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
-KM1
L V1 L V2 L V3 A1 A2 I.1 C I.2 I.3 C I4 I5 C I.6 97
95 96 32 34
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
LOCAL
REMOTE
STOP
ESD
START
RJ45
98
50G
-KS1 31
4
TRIP
A
6
LTME
-H1U1
-TESYS-O.3
-TESYS-O.2
-TESYS-O.1
C
7
33
23
13
C
LTMR TESYS-T
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
FAULT
REMOTE
HEATER
13
ALARM
ENABLE
RUN
22 24
22 24 22 24
-KM1
14
83 H1+230V
RD+
TD+
RD-
TD-
21
21 21
-KM2
H1 0V
84
TRIP
IN SERVICE TOROID T1
B3 B4 24 21 22 19 9 10 11 12 13 14 B1 B2
T2
L1 L2 L3 -X.SP.HE* 1 2
TCP/IP
1 TRANSMISSION DATA +
PE PE
RJ45
6
2 TRANSMISSION DATA -
3
3 RECEPTION DATA +
1
4 RECEPTION DATA - TO BY PASS SWITCH
HEATER
D
D
H1-5
ANTICON HEATER
TYPE-H1-2 SCHEMATIC-1
CUSTOMER
: BECHTEL
1 2 3 4 5 6 7 8 9 10
FAULT LOAD
LOAD
ON STATUS OFF STATUS FAULT ALARM SPARE
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
AVAILABLE
RUNNING IN REMOTE
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
-COLLECTOR1
-X1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
-X-TEST
A
A
L1
L1 L1
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
230V AC
L
are in open position, drawn out with operating m echanism discharged and all power sources off.
-H1-1B
N1
N N
N
A13
A14
A15 A16 A17 A18 A19
A20
A21 A22
A23
A24
B9 B10
-COLLECTOR2
153 161
32 34 42 44 -KM1 33 83 -KM1 33
L1
31 41 34 84
34
B7 B8
153
161
L2
1
3
154 162
FU.PT
2 4
0V 690
92 94 12 14 21
690/230V
32 34 42 44 13 97 -KF1
INSIDE SUBSTATION FIELD
-H1-1A
PT -KV1 -KF1 -KM2 -TESYS-O.4 -Q.SP1 91 11
22
-X2
42 44
-EPB1
31 41 14 98
1
230V KS -KS1
SIS TRIP
TESYS 13 KS
B TRIP O.4 A1
B
OV KS -Q1
41
LCS
2
14
1 23
12 14 24 22
-Q1
-KM1 -KM1
3
-KS2
FU.CE
24
BUTTON
-KS2
72 54 FU.2A 2
21
12 14
A3
11 21
43
1 3 -KM2 -KV1
4
-S1
22
12 14 11
A4
Q.PT
44
5
REMOTE
POSITION LIMIT
A5
(HEATER
11 -TESYS-O.1
SWITCH)
-H1SW1
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
2 4
6
14
TESYS O.1 A6
7
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
A7
2 14
-KS2 A1
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
(HEATER
-H1SW2
-X.LSW
A8
1
A2
9
13
23
33 43
-S2
-S2
-S2
-S2
-KS1 A1 A9
DRAWER SECURITY
UCP
C
(BLK) C
10
14
24 34 44
STOP
LAMP TEST
A2
A10
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
73
H1+230V KS
-KM2
11
H1+230V
N A1 74 A11
LTM9F H1 0V
UCP
12
L A2 -KF1 A1
START
H1 0V
-START1
X1 X1 X1 X1
A1 A1 -KV1 A1 -KM1 A1 -KM2 A1 A12
-H1
-H2 -H3 -H4 A2 -STOP1
(WHITE)
(ORANGE) (GREEN) (RED)
X2 X2
X2
X2
A2
A2
A2
A2
A2
TRIP
CONTROL
CONTACTOR
CONTACTOR
SERVICE
NOTE:-
- IN THE ABSENCE OF SIS OR E-STOP TRIP SIGNALS ,
D
D
H1-5
- IN THE ABSENCE OF THERMOSTAT SIGNALS RELEVENT
TYPE-H1-2 SCHEMATIC-2
CUSTOMER
: BECHTEL
C
B
A
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées. are in open position, drawn out with operating m echanism discharged and all power sources off.
A
B
C
1
Ind.
H1-5
Date
18-07-2017
15-10-2017
28-02-2018
First issue
Modification
2
CUSTOMER MODIFICATION
AS MANUFACTURED SCHEMATICS
Archiv.
Ind.
3
Date
Modification
Ethernet Cable
FROM TESYS-T
Archiv.
SW-*
Eth2-IN
Eth1-OUT
4-WIRE
BY PASS
SWITCH WIRING
TCSES L043F23F
+24V DC
4
0V
-X.CONV-*(*)*
-
+
GND
6
Eth1-IN
Eth2-OUT
ITEM
Q.SW.*
-X.EARTH
DOC. NO.
:
ITEM NAME
:
:
PROJECT
:
CUSTOMER
:
25
+24VDC-I
0V
Ethernet Cable
H1 - 690V
Ethernet Cable
BECHTEL
TO NEXT MODULE
EG001-11EV2AES00-C03-0040
8
9
Order No.
Drawing No.
32360565
C
10
E116033.01
Index Sheet
18 / 24
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées. are in open position, drawn out with operating m echanism discharged and all power sources off.
A
B
C
1
Ind.
H1-5
Date
18-07-2017
15-10-2017
28-02-2018
First issue
Modification
2
CUSTOMER MODIFICATION
AS MANUFACTURED SCHEMATICS
Archiv.
Ind.
3
I.9
I.8
I.7
I.6
I.5
I.4
I.3
I.2
I.1
I.10
Date
LOGIC
INPUTS
LOCAL
Modification
REMOTE
RUN HEATER
KM1 RUNNING
STOP HEATER
HEATER AVAILABLE
DRAWER IN SERVICE
4
SERIAL COMMUNICATION
Archiv.
4-WIRE ASSIGNMENT
5
4-WIRE
----
----
----
----
----
----
O.4
O.3
O.2
O.1
TYPE-H1-2 SCHEMATIC-3
LOGIC
OUTPUTS
6
----
----
----
----
----
----
ITEM
DOC. NO.
:
ITEM NAME
:
:
PROJECT
:
CUSTOMER
:
FAULT SIGNAL
25
REMOTE ENABLE
WARNING SIGNAL
H1 - 690V
BECHTEL
EG001-11EV2AES00-C03-0040
4-WIRE ASSIGNMENT
8
9
Order No.
Drawing No.
32360565
C
10
E116033.01
Index Sheet
19 / 24
1 2 3 4 5 6 7 8 9 10
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
A
(I-1)
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
&
are in open position, drawn out with operating m echanism discharged and all power sources off.
(I-1)
>1
>1
&
(I-1)
RUN
B
B
LATCHED OUTPUT
HEATER SWITCH DISCONNECTOR CLOSED
FAULT (19)
& AVAILABILITY (I8)
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C
C
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
&
STOP
>1
(I10)
L/O/R IN REMOTE(I3)
&
>1
D
COMMUNICATION OR H.W SIGNAL
D
H1-5
TYPE-H1-2 SCHEMATIC-4
CUSTOMER
: BECHTEL
1 2 3 4 5 6 7 8 9 10
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
MODULARITE
A
A
TYPE H1
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
FRONT HMI
are in open position, drawn out with operating m echanism discharged and all power sources off.
(LTMCU)
START BUTTON
REMOTE BUTTON
8M HEATER
RUN 1
ST OP
REMO TE
DISPLAY
RESET
5
E.R.H.
ON BUTTON
COMPUTER RJ45
CONNECTION
DISPLAY
12M
HEATER
SUPPLY ON
10
12 ITEM DESCRIPTION
B
B
H1 ON (RED)
H2 OFF (GREEN)
H3 FAULT (ORANGE)
H4 AVAILABLE (WHITE)
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C
C
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
D D
C
B
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées. are in open position, drawn out with operating m echanism discharged and all power sources off.
B
C
1
Ind.
H1-5
Date
15-10-2017
28-02-2018
First issue
Modification
2
AS MANUFACTURED SCHEMATICS
Archiv.
COMMENT
ANTICON HEATER
ANTICON HEATER
Ind.
3
Date
SHEET
32360565/16-9
32360565/16-10
Modification
4
Archiv.
H1-5H1-1B/B2
H1-5H1-1B/B1
-X.SP.HE*
TERMINAL BLOCK
ITEM
DOC. NO.
:
ITEM NAME
:
:
PROJECT
:
CUSTOMER
:
25
H1 - 690V
BECHTEL
EG001-11EV2AES00-C03-0040
8
9
Order No.
Drawing No.
32360565
C
10
E116033.01
Index Sheet
22 / 24
1 2 3 4 5 6 7 8 9 10
TERMINAL BLOCK
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
COMMENT SHEET
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
-X1
A A
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
FAULT
32360565/17-4
H1-5H1-1A/A13
are in open position, drawn out with operating m echanism discharged and all power sources off.
FAULT
32360565/17-4
H1-5H1-1A/A14
LOAD AVAILABLE
32360565/17-5
H1-5H1-1A/A15
LOAD AVAILABLE
32360565/17-5
H1-5H1-1A/A16
LOAD RUNNING
32360565/17-6
H1-5H1-1A/A17
LOAD RUNNING
32360565/17-6
H1-5H1-1A/A18
IN REMOTE
32360565/17-6
H1-5H1-1A/A19
IN REMOTE
32360565/17-7
H1-5H1-1A/A20
ON STATUS
32360565/17-7
H1-5H1-1A/A21
ON STATUS
32360565/17-7
H1-5H1-1A/A22
10
OFF STATUS
32360565/17-8
H1-5H1-1B/A23
11
OFF STATUS
32360565/17-8
H1-5H1-1B/A24
12
FAULT ALARM
32360565/17-8
H1-5H1-1B/B9
13
FAULT ALARM
32360565/17-8
H1-5H1-1B/B10
14
B
SPARE
32360565/17-9
B
15
SPARE
32360565/17-9
16
SPARE
32360565/17-9
17
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C C
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
D
D
H1-5
PROJECT
: WEST NILE DELTA-(WND)
ITEM
: 25
1 2 3 4 5 6 7 8 9 10
TERMINAL BLOCK
The technical inform ation contained in this docum ent is the exclusive property of Schneider Electric Industries S.A.E
COMMENT SHEET
and cannot be used or disclosed to third parties of any kind without its written consent. O nly those drawings and
-X2
A A
diagram s rem itted after order booking are binding for execution. All devices shown in this diagram s
SIS TRIP
32360565/17-9
H1-5H1-1A/A1
are in open position, drawn out with operating m echanism discharged and all power sources off.
SIS TRIP
32360565/17-9
H1-5H1-1A/A2
H1-5H1-1A/A3
NOTE:-
STOP PUSH BUTTON LCS CONTACT
32360565/17-9
H1-5H1-1A/A4
- IN THE ABSENCE OF SIS OR E-STOP TRIP SIGNALS ,
UCP STOP
32360565/17-9
H1-5H1-1A/A9
UCP STOP
32360565/17-9
H1-5H1-1A/A10
10
UCP START
32360565/17-9
H1-5H1-1A/A11
11
UCP START
32360565/17-9
H1-5H1-1A/A12
12
B B
Les inform ations techniques contenues dans ce docum ent sont la propriete exclusive de Schneider Electric Industries S.A.E
et ne peuvent etre utilisees ou divulguees a des tiers quels qu'ils soient sans son accord écrit. Seuls nous engagent
pour execution les plans et schém as rem is après enregistrem ent de la com m ande. Les appareils représentés
C C
sur ce schém a sont en position ouvert - désarm és - débrochés - toutes sources coupées.
D
D
H1-5
PROJECT
: WEST NILE DELTA-(WND)