Professional Documents
Culture Documents
1.Test Purpose: Test & Verify the sample from Alternative Source TR-19011-I-Mtl
Sample Detail: 15 pcs handle wire
Sample Reference:
Supply/Vendor Ref. Shenzhou ShengSen Metal Products Co.,Ltd
Temperature: 320C
Humidity: 76%
Tested By: Ashraaf
2. Test Results Details: √ Complete x Retake
Parameter Standard Samples Remarks
Outer Dia. Of wire 4.24 mm 4.10 mm Acceptable
Width of flat end 5.75 mm 5.78 mm Acceptable
Distance between flattened end 247±2 mm 245 mm
Height 177.8 mm 181 mm Acceptable
Width 279.4 mm 276 mm Acceptable
Functional test Good fitting with buckets Good fitting with
buckets. Will not come
out easily.
Sharp edge No sharp edge No sharp edge
Spot No spot Spot found on the Acceptable. Pictures in
holding point of dipping reference section.
Salt Spray test No rust in 24 hrs No rust in 24 hrs. In 48 Pictures in reference section.
hrs little bit come which
is less than 2%
3. Remark &Observation :
We found in 1 pc that edge color is not same. Most probably the electroplating material accumulate there. (pictures in reference
section)
5. Additional Internal Reference & protocols: (Application method, result note, Ref: Email,
Evidence/ photo)