Professional Documents
Culture Documents
Employment
Experience
Skills &
Proficiency
Personal Information
• Name:M.SIVARAMAN
•Welding Certification:- , CSWIP 3.1 Welding Inspector,
• Birthday: 04.04.1991
• Marital Status:Single
•the Welding Institute (TWI). Certificate No: 108670)
• Nationality:India •API-570 PRESSURE PIPING INSPECTOR(Certificate No-103183)
• Passport No:T9885663
•Email:sivaramn@experti •English communication and writing skills .
ndus.com
• Address: Jubail • Communicate , discuss and effectively engage with Clients to
Industrial City, KSA solve problems.
Experience
• Diploma in Mechanical
Engineering
• ASNT - NDT level II
(RT,PT,MPT,UT).
• A total of 11+ years experience as QA/QC Engineer.
➢ Welding Certification: -
➢ API Certification: -
Working with “M/s. EXPERTISE INDUSTRIAL SERVICES”, Al-Jubail, Saudi Arabia, Working as
“WELDING INSPECTOR” (Badge No-11814) since, 11th SEPTEMBER 2016.
OUR CLIENTS:-
Project Title: SRU MECHANICAL SD JOBS 2021 Working as QC LEAD from November-2021 to January-2022
Shutdown service Equipment’s (Reactor, vessel, Colum, Exchangers & Line replacement welding activity)
Project Title: HRSG BUNDLE REPLACEMENT JOB-2021 Working as QC LEAD from May-2021 to October-
2021.
Project Title: SAFANIYA OFFSHORE SOfPD-MGCP-PARTIAL T & I -2021 Working as QA QC Engineer from
February 2021 to April 2021.
Project Title: MADDEN PHOSAPHAT SULPHURIC ACID PLANT (SAP) SHUTDOWN -2021 Working as QA QC
INCHARGE (Tank, Reactor, vessel, Colum, Exchangers & Line replacement welding activity) from January 2021 to
February 2020.
Project Title: TASNEE EMERGENCY SHUT DOWN-2020 Working as QA QC Engineer from May 2020 to June
2020 (Reactor Catalyst replacement Job)
SAUDI INTERNATIONAL PETROCHEMICAL COMPANY (SIPCHEM) Al-Jubail-Kingdom of Saudi Arabia.
Project Title: CCR Reactor screen replacement and catalyst replacement, Piping &Welding Activity Inspection,
Furnace repair, Working as QA QC LEAD from March 2020 to April 2020.
(Line Defect and valve Defect) working as Welding Inspector & Welding QC Lead - August 2019 to December.
Project Title: SAFCO III RELAIBILITY IMPROVEMENT PROJECT –Repair and alteration R-STAMP JOB
Project Title: CCR Reactor screen replacement, Piping &Welding Activity Inspection, Furnace repair, Working as
QA QC ENGINEER from NOVEMBER to DECEMBER 2018.
M/s. SADAF SAUDI PETROCHEMICAL COMPANY (SABIC GROUP) Al-Jubail-Kingdom of Saudi Arabia.
Project Title: Heat exchanger Maintenance Inspection, Furnace, Piping &Welding Activity Inspection, Flange
Integrity Inspection, Working as Piping &Welding Engineer from OCTOBER to NOVEMBER 2018.
SABIC TERMINAL SERVICE CO (SABTANK) SABIC GROUP, Al-Jubail, Kingdom of Saudi Arabia, and Project Title:
PK-FLARE TIP REPLACMENT & FLARE PIPING REPLACEMENT - Jobs Supporting of Preparation Fabrication & Erection
Starting from APRIL 2018 to JUNE-2018 As Welding Engineer.
ARABIAN PETROCHEMICAL COMPANY (PETROKEMYA) SABIC GROUP, Al-Jubail, Kingdom of Saudi Arabia, and
Project Title: COLUMN INTERNALS REPLACMENT & BAFFLE PLATE INSTALLATION- Jobs Working Starting from March
2018 to APRIL-2018 As QA/QC-Engineer.
SABIC TERMINAL SERVICE CO (SABTANK) SABIC GROUP, Al-Jubail, Kingdom of Saudi Arabia, and Project Title:
SABTANK SADAF CAUSTIC LINE REPLACEMENT 12’’ SS - Jobs Supporting of Preparation Fabrication & Erection Starting
from December 2017 to Feb-2018 As Welding Inspector.
SHARQ EASTERN PETROCHEMICAL COMPANY (SABIC GROUP), Al-Jubail , Kingdom of Saudi Arabia,
Project Title: 3V1811 Vessel Shell Plate Replacement & Nozzle Replacement Jobs Supporting of Preparation Starting
from July 2017 to September Working As“ Welding Inspector.
Project Title: CATALYST REPLACEMENT JOB Working in from March 2017 to June 2017 working as “QC
INSPECTOR’’
Project Title: Heat exchanger Maintenance Inspection, Piping &Welding Activity Inspection, Flange Integrity
Inspection, Working as Piping &Welding Inspector from JAN -2017 to FEBRAURY 2017.
Project Title: Isolation Mechanical Support for Inspection of Piping & Repair for Primary Reformer and
Auxiliary Boiler working in Turnaround Projects Working as Piping &Welding Inspector from October -2016 to
November 206.
SHARQ EASTERN PETROCHEMICAL COMPANY (SABIC GROUP), Al-Jubail , Kingdom of Saudi Arabia, Project
Title: Heat Exchanger Maintenance Works and Piping & Valve Tam Jobs Supporting of Preparation Starting from
11th September 2016 to October 2016“Welding Inspector
PROFESSIONAL EXPERIENCE: -
➢ Internal Inspection Such shutdown activity (Pre-cleaning, internal inspection, post cleaning inspection &
recommended NDT activity.
➢ Reactor catalyst inspection with process team, loading and unloading & internal inspection pre & post
cleaning
➢ Catalyst Bed limit elevation & measurement inspection during catalyst loading time with Quantity
record.
➢ Removal of Inner and outer screen for Inspection and cleaning (Cleaning by Hydrojetting with Soda
ash)
➢ Installation Inspection inner and outer screen with proper alignment with bottom cone.
➢ Final inspection
➢ Stage wise inspection of static Equipment (Pressure vessels, Tank, Colum, Exchangers, filters
&Strainers)
➢ Internal Inspection Such shutdown activity (Pre-cleaning, internal inspection, post cleaning inspection &
recommended NDT activity.
➢ Tank Pre cleaning and post cleaning inspection with recommended NDT Activity.
➢ Maintenance of rotating and Static Equipment’s as per scope and client recommendation
➢ Acquired Knowledge in construction of Petro plant, Refinery, oil and gas Equipment.
➢ Ensure that all the QA/QC activities in the project are compliance with project specification.
➢ Requirements, Review of vendor quality manuals, quality plans, specifications, procedures, audit report
according to project requirements. Participated in internal audits. Verify the evidence of corrective
actions and close observations and NCR.
➢ Liaise with client for review and approval QA/QC documents and participating in client meetings,
internal meetings etc.
➢ Plan & Organize vendor and site inspection activities and review weekly and monthly reports.
➢ Review vendor document of QC inspectors and NDT technician end ensure their qualification remain
valid.
II) Worked with ““M/S MADINA GROUPS, QATAR, PLANT; SHELL QSGTL, Turnaround Project
Working As “WELDING INSPECTOR “(Badge No-10840) since, Jan 2015 to April 2016.
MY RESPONSIBILITIES INCLUDES: -
III) Worked with “M/s. Dry Docks World Dubai, FLNG TURRET, SOLAN SUBSEA OIL STORAGE
TANKSITE IN DUBAI, Onshore/Offshore Working As “QA/QC-ENGINEER” since, November
2013 to September 2014.
Projects: -
Worked for the Construction jobs for a Ship Repairing yard it is also the preferred location
for vessel conversions, New Building with Onshore/Offshore Construction. Dry-Docks
World’s Dubai shipyard is one of the most prolific shipyards in operation. The shipyard is the
largest facility in the Middle East and is the flagship company of Dubai World subsidiary Dry-
docks World.
MY RESPONSIBILITIES INCLUDES: -
➢ Supervises all the quality control activities of a project based on approved ITP.
➢ Review material test certificates and checking the material based on standards& Project Specification.
➢ Inspection of fit up and weld visual of shop and field fabricated spools.
➢ Interpretation of Root and final weld DPT.
➢ Preparation of Punch list and witnessing the Pressure Tests.
➢ Submitting Test Packs for final certification.
➢ Provide verification of electrode baking and holding temperature including control, issue.
➢ Welding inspection of piping.
➢ Monitoring welder performance and converting the NDT requirements.
➢ Assuring proper follow up of W.P.S during welding.
➢ Final loop and Isometric clearance.
➢ Ensuring controlling of quality format, procedures and specification.
➢ Makes All Qc Relevant Documentation.
IV) Working with ‘‘M/s JOBBY ENGINEERS Pvt Ltd’’, Waste Immobilization Plant (WIP)
Site in Indira Gandhi Centre for Atomic Research (IGCAR) Kalpakam, as “QA/QC-
INSPECTOR “since, December 2010 to October 2013.
MY RESPONSIBILITIES INCLUDES: -
➢ Coordination with the client for the field inspection activities of piping jobs.
➢ Supervises all the quality control activities of a project based on approved ITP.
➢ Inspection of all incoming materials for construction.
➢ Preparation of Fit up and weld visual inspection report after the field inspection and maintaining complete quality
records.
➢ Coordinating with the project third party inspectors and liaison with client & sub-contractors.
➢ Coordination with the NDT activities.
➢ Interpretation of Radiographic films based on applicable codes.
➢ Inspection of painting work.
➢ Checking of Relief valves and pressure safety valves for proper installation.
➢ Preparation of Hydro Test Packages.
➢ Witnessing of hydro test.
➢ Preparation of punch list.
➢ Submitting test packs for final certification.
➢ Proficiency in Computers.
1. BASIC
2. WINDOWS
3. MS-OFFICE
4. INTERNET & E-MAIL.
ABOUT MYSELF
➢ Having good communication and interpersonal skill with positive attitude to work.
PERSONAL DETAILS
PASSPORT DETAILS:-
New-Passport No : T-9885663
Issued date : 05/07/2011
valid up to : 04/07/2021
Issue Place : CHENNAI, INDIA.
DECLARATION:-
I hereby declare that the above statements made are complete and true to my knowledge.
Date : Signature,
Place :
(M.SIVARAMAN)