You are on page 1of 2

Activity:

PAGE OF JSA NO.

JOB SAFETY ANALYSIS Engineer:

Company: Location:

Recommended Personal Protective Equipment:

Sequence of Basic Task Steps Existing and Potential Hazards

Driving the crane to the work area Physical hazard due to collision with other vehicles or structures.

Postioning of the crane Physical hazard due to collision with other vehicles or structures.

Physical hazard due to collapsing of the crane, struck by hazard pedestrians o


Lifting the Load
collision with other equipment or nearby structure
Date: New Revised

Supervisor: Analysis By:

Department: Reviewed By ( HSE Department ):

Approved By ( Project Manager ):

Recommended Action or Procedure

1. The crane operator must be oriented prior to enter the site

2. The crane operator must have a SAG heavy equipment driving


license and the operator must be SA certified
3. Make sure that the operator do not use curtain or other similar
to collision with other vehicles or structures. material to cover the window
4. The operator must comply with the site speed limits 20km/h

5. The operator must always wear seat belt while driving.


Talking on the cell phone while driving is prohibited.
6. The crane operator must visit the area where he shall drive
through prior to drive the crane.
1. The crane must be inspected by the HSE department prior to
enter the site. In case of any leakage, the crane will not be
allowed to enter, unless the problem is fixed.

to collision with other vehicles or structures. 2. Spill kit shall be available in order to contain the spillage/
leakage once occurs.
3. The contaminated rags shall be dumped in the hazardeous
waste disposal designated area.
1. Rigger must inspect the site and the lifting equipment from the
crane, lifting gears, etc,..
2. Work permit must be availabe at site
g of the crane, struck by hazard pedestrians or operatives,
h other equipment or nearby structure 3. The crane must be certified by a SA approved third party or
SA unless otherwise notified
4. The crane operator must be certified by SA approved third
party or SA unless otherwise notified

You might also like