Professional Documents
Culture Documents
Management of Change: Document No Version # Issue Date Page 1 of 1 OMS/PPP/MANT/SOR-006 0 27/03/2019
Management of Change: Document No Version # Issue Date Page 1 of 1 OMS/PPP/MANT/SOR-006 0 27/03/2019
MOC Title: Drain of HFO automatic backwash filter Maintenance Order No:
Originator (Name/Job Title) Khawaja Shahid I/C DPP Date: 6/22/2019
A1. Modification Description: (attach sketched, drawings, photos etc. as required to fully describe
scope of work)
A2. Reason for modification: (i.e. improvement in safety, cost effectiveness, operating efficiency,
client requirement, environment protection)
Cost Effectiveness
A3. Attach details of modification impact: (safety plan, hazardous area, operating manual, drawing
revisions etc.)
Description of work:
HFO automatic backwash filter is self-cleaning through own-medium flushing
Backwash is triggered due to following two reasons
Timer i.e. 30min
Differential pressure between inlet and outlet of filter
The back-flushing effect depends on the pressure differential between the clean side of the filter
and flushing oil piping
Earlier piping route of backwash oil was to sludge tank, however in order to save this oil this route is
changed to clean oil tank