Professional Documents
Culture Documents
Arrow-Pak 7.0 X 4.unlocked
Arrow-Pak 7.0 X 4.unlocked
300
UNIT NO. 265-74 Arrow-Pak
PN. 00758349
DATE 30-Sep-2004
Revision 1.0
Arrow-Pak Retrievable
Sealbore Packer
The Arrow-Pak Retrievable Sealbore Packer is a reliable, high-pressure packer
used for production, gravel packing, or injection applications. The Arrow-Pak is
set on wireline or tubing with a hydraulic setting tool, and it may be retrieved
with a pulling tool on a workstring. Rotationally locked components ease milling
when retrieval is not possible. The Arrow-Pak's patented ECNER Array packing
element system is designed for high pressure and resists swab-off.
Features
• High-pressure ECNER Array packing element system
• Conveyed on tubing or wireline
• Rotationally locked for ease in milling
• Retrieval mechanism protected from debris
• Materials available suitable for hostile environments
• No rotation required running or retrieving the packer
• Slips below element simplify retrieval
Benefits
• Reliable, dependable field-proven design
• Easy to retrieve and redress
• High performance in compact size
• Versatile packer with wide selection of accessories and materials
Applications
• High-pressure production or injection
• Anchored or floating seal applications
• High-rate gravel packing
• Stimulation and fracturing
• TCP guns suspended below a packer
• Deviated and horizontal wells
Weatherford products and services are subject to Weatherford’s standard terms and
Packer Systems 1 of 9 conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted
otherwise, trademarks and servicemarks noted herein are the property of Weatherford.
© 2004. Weatherford. All rights reserved.
INDEX NO. 300
UNIT NO. 265-74 Arrow-Pak
PN. 00758349
DATE 30-Sep-2004
Revision 1.0
SPECIFICATIONS GUIDE
Weatherford products and services are subject to Weatherford’s standard terms and
Packer Systems 2 of 9 conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted
otherwise, trademarks and servicemarks noted herein are the property of Weatherford.
© 2004. Weatherford. All rights reserved.
INDEX NO. 300
UNIT NO. 265-74 Arrow-Pak
PN. 00758349
DATE 30-Sep-2004
Revision 1.0
SETTING PROCEDURE
Run the Arrow-Pak in to setting depth on wireline pressure setting assembly using the Arrow-Pak Wireline Adapter Kit
or on tubing using a hydraulic setting tool.
RELEASING PROCEDURE
The retrieving tool is run in the hole and set down force is applied when the packer is contacted. A few points is
sufficient to fully latch the retrieving tool into the packer. At this point, the release collet is positioned directly below
the support ring of the packer. Straight pull will engage the release collet and the support ring. Tension force is
applied which will shear the screws in the support ring and shift it upward thus releasing the packer.
If the support ring does not shear out easily, there is a built in jar stroke in the retrieving tool. By jarring upward,
either the support ring will shear or the shear ring in the retrieving tool will shear. This is a safety shear, which will
enable the retrieving tool to be rotated free of the packer if the packer will not release. If this is necessary, pull slight
tension and rotate to the right approximately 8 turns to release the retrieving tool from the packer. The shear value of
the shear ring is adjustable and should be considered prior to running the retrieving tool.
Weatherford products and services are subject to Weatherford’s standard terms and
Packer Systems 3 of 9 conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted
otherwise, trademarks and servicemarks noted herein are the property of Weatherford.
© 2004. Weatherford. All rights reserved.
INDEX NO. 300
UNIT NO. 265-74 Arrow-Pak
PN. 00758349
DATE 30-Sep-2004
Revision 1.0
DIMENSIONS (IN./mm)
SIZE PRODUCT
(IN./mm) NUMBER A B C D E F G
7 X 4.00 9.625 4.000 11.000 5.750 5.063 2.875 5.000
177,80 x 101,60
00171892 244,48 101,60 279,40 146,05 128,60 73,03 127,00
D E F G
C
B
A
Weatherford products and services are subject to Weatherford’s standard terms and
Packer Systems 4 of 9 conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted
otherwise, trademarks and servicemarks noted herein are the property of Weatherford.
© 2004. Weatherford. All rights reserved.
INDEX NO. 300
UNIT NO. 265-74 Arrow-Pak
PN. 00758349
DATE 30-Sep-2004
Revision 1.0
Weatherford products and services are subject to Weatherford’s standard terms and
Packer Systems 5 of 9 conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted
otherwise, trademarks and servicemarks noted herein are the property of Weatherford.
© 2004. Weatherford. All rights reserved.
INDEX NO. 300
UNIT NO. 265-74 Arrow-Pak
PN. 00758349
DATE 30-Sep-2004
Revision 1.0
ASSEMBLY
1. Place mandrel (12) in vise with grooves up. 1
2. Slide upper cone (13) into slip cage (16) and install shear screw (15).
2
3. Install slip springs (18) and slips (17) into slip cage (16).
4. Slide slip cage assembly (16) onto mandrel (12). 3
5. Slide lower cone (20) onto mandrel (12) into slip cage (16).
6. Install collet support ring (26) inside of collet (22). 4
7. Tap support ring (26) flush with collet fingers and install shear screws (25).
8. Install inner and outer o-rings (23 & 24) onto collet (22). 5
9. Install collet (22) onto mandrel (12) 6
10. Thread bottom (27) into lower cone (20). 7
11. Install set screws (21) in lower cone (20). Rotate sub-assembly onto 8
collet (22).
12. Place bottom (27) in vise. 9
13. Install lower retainer (11) onto upper cone (13).
14. Install torque screws (14 & 19) into upper and lower cones (13 & 20).
15. Install shear screws (15) in slip cage (16) and into lower cone (20). 10
16. Lubricate mandrel (12) where packing element (10) rests on mandrel (12).
17. Install packing element (10). NOTE: Make sure element system is flush with
upper gage ring (9) and lower retainer (11). 11
18. Install upper gage ring (9) onto upper retainer (8). [LEFT-HAND THREAD] 12
19. Install upper retainer (8) onto mandrel (12). 13
20. Install lock ring (6) in setting sleeve adapter (7) and install set screw (5). 14
21. Install setting sleeve adapter (7) onto upper retainer (8).
22. Install top body (3) onto mandrel (12). 15
16
23. Slide setting sleeve (1) over top body (3) and install setting sleeve (1) onto
17
setting sleeve adapter (7).
24. Install shear screws (4) into setting sleeve (1) and groove in top body (3). 18
25. Install shipping bolt and nut (2) in setting sleeve (1) as shown.
15
19
20
21
22
23
24
25
26
27
Weatherford products and services are subject to Weatherford’s standard terms and
Packer Systems 6 of 9 conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted
otherwise, trademarks and servicemarks noted herein are the property of Weatherford.
© 2004. Weatherford. All rights reserved.
INDEX NO. 300
UNIT NO. 265-74 Arrow-Pak
PN. 00758349
DATE 30-Sep-2004
Revision 1.0
15
19
20
21
22
23
24
25
26
27
Weatherford products and services are subject to Weatherford’s standard terms and
Packer Systems 7 of 9 conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted
otherwise, trademarks and servicemarks noted herein are the property of Weatherford.
© 2004. Weatherford. All rights reserved.
INDEX NO. 300
UNIT NO. 265-74 Arrow-Pak
PN. 00758349
DATE 30-Sep-2004
Revision 1.0
DIMENSIONAL DATA E
DIMENSIONS (IN./mm)
PRODUCT
NUMBER A B C D
F
57.000 38.625 32.938 17.625
00758349 1447,80 981,08 836,63 447,68
DIMENSIONS (IN./mm)
PRODUCT
D
NUMBER E F G H
5.120 5.817 5.938 4.000
00758349 130,05 147,75 150,83 101,60
DIMENSIONS (IN./mm) G
PRODUCT C
NUMBER J K M N
5.906 4.120 4.195 4.115
00758349 150,01 104,65 106,55 104,52 G
B
H
A J
Weatherford products and services are subject to Weatherford’s standard terms and
Packer Systems 8 of 9 conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted
otherwise, trademarks and servicemarks noted herein are the property of Weatherford.
© 2004. Weatherford. All rights reserved.
INDEX NO. 300
UNIT NO. 265-74 Arrow-Pak
PN. 00758349
DATE 30-Sep-2004
Revision 1.0
PARTS LIST
1
7" X 4.000"
ITEM
DESCRIPTION 23.0 - 32.0 2
NO.
00758349
3
1 SETTING SLEEVE 00163309
2 SHIPPING BOLT 5/16-18 X 1" 00163411 4
NUT 00152668
3 TOP BODY 00153014 5
4 SHEAR SCREW* 3/8-16 X 1/2" 00147526 (4) 6
5 SET SCREW* 1/4-20 X 1/2" 00151029 7
6 LOCK RING 00162631 8
7 SETTING SLEEVE ADAPTER 00162834
8 UPPER RETAINER 00162835 9
25
26
27
Weatherford products and services are subject to Weatherford’s standard terms and
Packer Systems 9 of 9 conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted
otherwise, trademarks and servicemarks noted herein are the property of Weatherford.
© 2004. Weatherford. All rights reserved.