Professional Documents
Culture Documents
INSTALLATION MANUAL
Applied Machines: C3850FS/C3850/C3350
COLOR MFP: 38 ppm/33 ppm
Product Code: A72R/A3GN/A4Y4
2. Fixing bracket
3. Shoulder screw
4
4. Installation
manual
1 set
(4) Slide out the tray and remove the protective tape
and protective material.
Note:
Take care not to touch the surface of the paper
feed roller. If you touch it by mistake, wipe off any
dirt on the roller surface using dry cloth.
After unpacking, be sure to get rid of the Protective material
packaging materials and keep them out Protective tape
of the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
Note:
• Up to two paper feed units may be mounted.
• This manual provides the illustrations of the
accessory parts and machine that may be
slightly different in shape from yours. In that
case, instead of the illustrations, use the
appearance of your machine to follow the
installation procedure. This does not cause any Protective tape
significant change or problem with the proce-
dure.
• If none of the later steps instruct you to use the (5) Slide the tray back in.
parts including screw and cover that you
removed following the instructions described in
this manual, discard them.
A4Y6-9580-01
E-1
(6) Remove the lower right cover from the main (8) Slide out the tray 1 of the main body and the tray
body. of the paper feed unit, and secure the paper feed
Note: unit by using the two supplied fixing brackets at
Discard the removed lower right cover. the front. (One supplied shoulder screw each)
Note:
If you mount two paper feed units to the main
body, combine the paper feed units in advance by
taking the following steps (7) to (10).
(7) Assign two or more persons to carry the main (9) Secure the paper feed unit by using the two sup-
body and set it on the paper feed unit(s). plied fixing brackets at the rear. (One supplied
Caution: shoulder screw each)
To prevent injuries use at least two people to lift
the main body.
E-2
3. Loading the tray 4. Affixing the tray label/paper size label
(1) Slide out the tray and push the paper lifting plate Affix the tray label or paper size label at the location
down by hand to lock it. shown in the illustration.
Note:
If both are to be affixed, the tray label should be on
the upper side and the paper size label on the
lower side.
(3) Set paper with the printing side upward and slide
the paper width guide to the paper size.
Note:
Make sure that the top level of the paper stack
does not exceed the ▼ (MAX) paper level indica-
tor.
E-3