Professional Documents
Culture Documents
C)
Well: BG-1506
Rig: KDC-43
Cementing Program for 13 3/8" Casing
1.0
2. Well Data:
Casing: 13-3/8’’Csg @ 5,283 ft MD / 4,176 ft TVD.
BHST: 143 °F
BHCT: 121 °F
Hole Size: 16 ’’ (60 % excess for Tail and 80% for Lead)
Lead Slurry Volume/Rate: 491 bbl @ 12.5 ppg (35% excess in OH)
2.0
5. Fly-Mix & Pump 491 bbl of Lead Cement Slurry 12.5 ppg @ 4-5bpm.
6. Fly-Mix & Pump 90 bbl of Tail Cement Slurry 15.8 ppg @ 5 bpm
7. Drop Top Plug and flush Cement lines by 10 bbls of water as displacement into the
casing.
8. Displace the Cement using Rig Pump with +/- 769 bbls @ 9 ppg of well fluid.
Rates Recommended:
700 bbl: 10-12 bpm
55 bbl: 6 bpm
14 bbl: 3 bpm
9. If the Plug Bumps then the Pressure up to 500 Psi above differential
(As per KOC Policy).
10. If the Plug doesn’t bump over displace with half volume of shoe track i.e 6 bbls.
11. If floats hold and no back flow observed, remove cement head and WOC.
12. If the floats don’t hold (or) Back flow observed, then close the valves on the cement head
and hold pressure until cement set.
Mud conditioning is recommend before doing the cement job (mud YP =10 or
less).
Actual displacement volume must be calculated and agreed upon by the company
man and the NAPESCO supervisor prior to the job and based on actual well data
and casing tally.
This program is tentative and subject to change as per actual well scenarios on
location.
100 bbl @ 15.8 PPG equivalents (neat cement) has to carry out to the location
for top job ( More volumes has to carry out upon request)
Frac density of around 14.5 ppg at TD has been assumed in the simulation.
3.0
KOC Program
CEMENT PROGRAM Date: 16-Apr-19
Data: Cmt Co: NAPESCO T J Avg Hole Size from Caliper Log (if avail)
Plan TOC Yield O O Top of
@ (feet) Density (ppg) (ft3/sx) P B Btm of Interval Interval Caliper Vol (ft3)
Lead: 0 12.5 2.19 Bore hole Volume
Tail: 4783 15.8 1.17 Cement.Vol.
Casing Size: 13 3/8 68 ppf
Set @: 5283 feet MD OPEN HOLE VOLUMES IN BBLS
Set @: 4175.74 feet TVD GAUGE CALIPER %Washout HOLE SIZE
Casing ID: 12.415 inches L 395.70 0.00 0.00 16.00
Length Shoe- Collar 2 jts E
CASING DETAILS
MD OD WEIGHT ID GRADE Collapse Burst Tensile CONN Makeup
(feet) (inches) (lb / ft) (inches) (psi) (psi) (Klbs) Torque
5283 13.375 68 12.415 K-55 1950 3450 713 BTC Base of
4.0
Submitted to :
Drilling Engineer - KOC Signed:
This report is the property of NAPESCO and is intended for private information of the above named party. This report nor any part thereof maybe published or disclosed to a third party without approval of NAPESCO.
Well ID: BG-1506 Customer: KOC BHST: 143F
Density : 12.50 PPG Comp. Strength@24hrs : 960 psi
Job : 13 38" CSG LEAD
400 20 2500
360 18 2250
320 16 2000
280 14 1750
Compressive Strength (psi)
Transit Time (microsec/in)
240 12 1500
Temperature (°F)
200 10 1250
160 8 1000
120 6 750
80 4 500
40 2 250
0 0 0
0:00 4:00 8:00 12:00 16:00 20:00 24:00
Time (HH:MM)
NAPESCO Test File Name: KDC-43_BG-1506_13 38 CSG LEAD 12.50 PPG_NPSC-19-461 Page 1
OFS-LAB
Well ID:BG-1506 Customer: KOC BHST: 143 F
DENSITY: 15.80 PPG Comp.Strength@24Hrs:2980 psi
JOB: 13 38 CSG TAIL
400 20 5000
360 18 4500
320 16 4000
280 14 3500
Compressive Strength (psi)
Transit Time (microsec/in)
240 12 3000
Temperature (°F)
200 10 2500
160 8 2000
120 6 1500
80 4 1000
40 2 500
0 0 0
0:00 4:00 8:00 12:00 16:00 20:00 24:00
Time (HH:MM)
CHANDLER Test File Name: KDC-43_BG-1506_13 38 CSG TAIL 15.80 PPG_NPSC-19-462 Page 1
ENGINEERING Printed: 14/04/2019 10:26:21
6.0
CEMPRO Report
CEMPRO+ - Mud Displacement Model
CEMPRO
Computational Results
Casing: 13 3/8
1
Well location: On land - Forward
Geothermal
Surface T. = 85 (F)
Conductivity Heat Capacity T. gradient
# Lithology TVD (ft) Density (lbm/ft3) T. (F)
(Btu/h-ft-F) (Btu/lb-F) (F/100ft)
1 Shale 5283.0 140.0 0.920 0.30 1.10 143
Pipe:
Tool joint effect on hydraulics: No
Joint TJ
Length Wt TJ OD TJ ID Collapse Burst str.
# Description OD (in) ID (in) Grade length length Yield (psi)
(ft) (lbm/ft) (in) (in) str. (psi) (psi)
(ft) (in)
1 Casing, 68.000 5283.0 13.375 68.000 12.415 13.709 12.339 K55 0.0 0.000 55000 1946 3454
(lbm/ft)
Fluid properties
Conduc Heat
YP Gel
Density tivity capacity Inlet T.
# Fluid Model PV (cP) (lbf/100f n K (*) (lbf/100f
(ppg) (Btu/h- (Btu/lb- (F)
t2) t2)
ft-F) F)
1 MUD 9.20 BP 1.0 0.0 - - 0.0 0.000 0.00 -
2 PREFLUSH 8.40 BP 1.0 0.0 - - 0.0 0.000 0.00 60
3 SPACER 10.50 BP 1.0 0.0 - - 0.0 0.000 0.00 60
4 LEAD 12.50 BP 36.0 7.0 - - 0.0 0.000 0.00 60
5 TAIL 15.80 BP 71.0 7.0 - - 0.0 0.000 0.00 60
6 MUD 9.20 BP 1.0 0.0 - - 0.0 0.000 0.00 60
*: (lbf-s^n/100ft2)
2
Pumping schedule (Total volume = 1457.000 (bbl), Total time = 208.492 (min))
Time with
Liquid vol. Additional Liquid Q N2 ratio Stage Time Cumul. Time
Fluid Cement
(bbl) vol. (%) (bpm) (scf/bbl) (min) (min:sec)
(min)
PREFLUSH 50.000 0.0 6.00 - 8.333 8:20 0.000
SPACER 50.000 0.0 6.00 - 8.333 16:40 0.000
LEAD 491.000 0.0 5.00 - 98.200 114:52 98.200
TAIL 87.000 0.0 4.00 - 21.750 136:37 119.950
MUD 10.000 0.0 5.00 - 2.000 138:37 121.950
700.000 0.0 12.00 - 58.333 196:57 180.283
55.000 0.0 8.00 - 6.875 203:50 187.158
14.000 0.0 3.00 - 4.667 208:30 191.825
Pump
Surface line length = Surface line ID = 1.876 Maxi. P. rating = 10000 Maxi. pump horsepower = Pump stroke = 0.2000
100.0 (ft) (in) (psi) 400. (HP) (bbl/stk)
No choke P.
Output Summary
P. @ ECD @ ECD @
Flow rate Pump P. Pump Free fall
Variables 5283.0 (ft) 5283.0 (ft) 330.0 (ft) Weak zone Weak zone
(bpm) (psi) HHP (HP) (ft)
(psi) (ppg) (ppg)
Maxi. value 84.73 879 232. 2837 12.99 12.65 n/a n/a 1224.6
Mini. value 0.00 54 7. 2008 9.18 8.43 n/a n/a 0.0
Maxi. @ time (min) 152.933 203.825 196.950 208.493 208.493 208.492 n/a n/a 136.617
Mini. @ time (min) 140.007 136.756 136.756 133.214 133.214 194.492 n/a n/a 0.139
Final fluid positions: ('-' means position in annulus for forward circ., and in pipe for reverse circ.)
Ann. fill - len.
Fluid Front (ft) Trail (ft) Pipe fill - len. (ft) Ann. fill - vol. (bbl) Pipe fill - vol. (bbl)
(ft)
PREFLUSH -0 -0 0.0 0.0 0.000 0.000
SPACER -0 -0 0.0 0.0 0.000 0.000
LEAD -0 -4782.3 4782.3 0.0 490.696 0.000
TAIL -4782.3 5202.7 500.7 80.3 74.977 12.023
MUD 5202.7 5135.9 0.0 66.8 0.000 10.000
5135.9 460.8 0.0 4675.1 0.000 699.998
460.8 93.5 0.0 367.3 0.000 55.000
93.5 0.0 0.0 93.5 0.000 14.003
Geometry table
Description Start (ft) End (ft) Vol. (bbl) Vol. (bbl/ft)
Pipe: ID = 12.415 (in), 5283.0 (ft) 0.0 5283.0 791.024 0.150
Ann.: 17.467 x 13.375 (in), 330.0 (ft) 0.0 330.0 40.458 0.123
Ann.: 16.822 x 13.375 (in), 4453.0 (ft) 330.0 4783.0 450.308 0.101
Ann.: 18.251 x 13.375 (in), 500.0 (ft) 4783.0 5283.0 74.907 0.150
Volume inside entire pipe 0.0 5283.0 791.024 0.150
Volume in entire annulus 0.0 5283.0 565.673 0.107
Volume inside pipe and annulus 0.0 5283.0 1356.698 0.257
Pipe displacement (open ended) 0.0 5283.0 127.063 0.024
Pipe displacement (closed ended) 0.0 5283.0 918.087 0.174
Hole volume w/o pipe 0.0 5283.0 1483.761 0.281
Pipe surface area 35669.8 (ft2)
3
Description Start (ft) End (ft) Vol. (bbl) Vol. (bbl/ft)
Wellbore surface area 23509.4 (ft2)
Event table
ECD @ 5283.0 ECD @ 330.0
Job time (min) Rate in (bpm) Rate out (bpm) Vol. in (bbl) Fluid in/btm/out
(ft) (ppg) (ft) (ppg)
0.139 6.00 6.00 0.834 9.22 9.21 PREFLUSH/MUD/MUD
8.472 6.00 6.00 50.834 9.22 9.21 SPACER/MUD/MUD
16.806 5.00 6.84 100.695 9.22 9.21 LEAD/MUD/MUD
115.006 4.00 6.03 591.556 9.22 9.21 TAIL/MUD/MUD
125.430 4.00 6.09 633.254 9.22 9.21 TAIL/PREFLUSH/MUD
132.797 4.00 6.77 662.721 9.18 9.21 TAIL/SPACER/MUD
136.756 5.00 5.00 678.695 9.20 9.21 MUD/SPACER/MUD
153.072 12.00 80.74 861.465 10.99 10.09 MUD/LEAD/MUD
194.353 12.00 12.00 1356.841 12.12 8.46 MUD/LEAD/PREFLUSH
196.577 12.00 12.00 1383.528 12.38 9.24 MUD/TAIL/PREFLUSH
199.313 8.00 8.00 1406.903 12.64 10.47 MUD/TAIL/SPACER
208.412 3.00 3.00 1456.760 12.99 12.63 MUD/TAIL/LEAD
4
5
6
7
8
9
Job detail
Time Fluid Vol. in No. of Rate in Rate Pump Choke Free fall Pin - ECD @ ECD @ Pressure Fric. P. pipe Fric. P. Ann.
(min) in/btm/out (bbl) strokes (bpm) out P. (psi) P. (psi) (ft) Pout @ 5283.0 330.0 @ 5283.0 (psi) (psi)
(stk) (bpm) 5283.0 (ft) (ppg) (ft) (ft) (psi)
(ft) (psi) (ppg)
1 0.139 2/1/1 0.834 5 6.00 6.00 69 15 0.0 0 9.22 9.21 2017 51 4
2 10.000 3/1/1 60.000 301 6.00 6.00 89 15 0.0 0 9.22 9.21 2017 61 4
3 20.000 4/1/1 116.667 584 5.00 6.78 122 15 47.2 0 9.22 9.21 2018 108 5
4 30.000 4/1/1 166.667 834 5.00 6.77 122 15 166.0 0 9.22 9.21 2018 108 5
5 40.000 4/1/1 216.667 1084 5.00 6.72 122 15 283.0 0 9.22 9.21 2018 109 5
6 50.000 4/1/1 266.667 1334 5.00 6.68 122 15 396.5 0 9.22 9.21 2018 110 4
7 60.000 4/1/1 316.667 1584 5.00 6.56 122 15 505.6 0 9.22 9.21 2018 110 4
8 70.000 4/1/1 366.667 1833 5.00 6.21 122 15 599.3 0 9.22 9.21 2017 111 4
9 80.000 4/1/1 416.667 2084 5.00 5.99 122 15 671.4 0 9.22 9.21 2017 112 4
10 90.000 4/1/1 466.667 2334 5.00 6.01 122 15 738.2 0 9.22 9.21 2017 112 4
11 100.000 4/1/1 516.667 2584 5.00 6.02 122 15 806.6 0 9.22 9.21 2017 113 4
12 110.000 4/1/1 566.667 2834 5.00 6.03 122 15 875.6 0 9.22 9.21 2017 113 4
13 120.000 5/1/1 611.533 3058 4.00 6.08 118 15 980.2 0 9.22 9.21 2017 110 4
14 130.000 5/2/1 651.533 3258 4.00 6.80 118 15 1139.6 0 9.20 9.21 2012 111 5
15 140.000 6/3/1 704.600 3524 12.00 0.07 206 15 1164.8 16 9.21 9.20 2014 192 0
16 150.000 6/3/1 824.600 4123 12.00 0.00 206 15 363.6 397 9.20 9.20 2014 192 0
17 160.000 6/4/1 944.600 4724 12.00 6.92 206 15 535.9 0 9.86 9.21 2156 198 14
18 170.000 6/4/1 1064.600 5323 12.00 7.57 206 15 215.8 0 10.26 9.21 2244 197 23
19 180.000 6/4/1 1184.600 5924 12.00 12.00 276 15 0.0 0 10.78 9.23 2357 196 42
20 190.000 6/4/1 1304.600 6523 12.00 12.00 559 15 0.0 0 11.68 9.23 2552 195 56
21 200.000 6/5/3 1412.400 7063 8.00 8.00 779 15 0.0 0 12.69 10.51 2772 93 59
22 208.493 6/5/4 1457.003 7286 3.00 3.00 836 15 0.0 0 12.99 12.65 2837 16 50
10
MD | TVD (ft) Annulus Casing
0 0 0.0
MUD,9.20 (ppg)
PREF...,8.40 (ppg)
SPACER,10.50 (ppg)
LEAD,12.50 (ppg)
TAIL,15.80 (ppg)
MUD,9.20 (ppg)
1000 997
2000 1948
3000 2695
4000 3342
4782.3
5000 3992
5202.7
5283 4178
11
0.0
MUD, 9.20 (ppg) PREFLUSH, 8.40 (ppg) SPACER, 10.50 (ppg)
LEAD, 12.50 (ppg) TAIL, 15.80 (ppg) MUD, 9.20 (ppg)
400.0
800.0
1200.0
1600.0
2000.0
TVD (ft)
2400.0
2800.0
3200.0
3600.0
4000.0
4400.0
12
7.0
CENTRA Report
CENTRA
KUWAIT
Centra Design
1 of 13
Wellbore intervals (from top down) Well name:
2 of 13
MD (ft) Inc (deg) Azi (deg) TVD (ft) Vsec (ft) N+/S- (ft) E+/W- (ft) Dogleg
(deg/100ft)
3 of 13
MD (ft) Inc (deg) Azi (deg) TVD (ft) Vsec (ft) N+/S- (ft) E+/W- (ft) Dogleg
(deg/100ft)
4 of 13
5 of 13
6 of 13
7 of 13
8 of 13
Summary
Total number of centralizers required 71
9 of 13
String MD (ft) HL - slack off w/o rot. HL - Static (lbf) HL - pick up w/o rot. ST - slack off w/o rot. ST - Static (ft-lb) ST - pick up w/o rot.
(lbf) (lbf) (ft-lb) (ft-lb)
700 40359 41077 41807 0 0 0
800 46065 46928 47803 0 0 0
900 51746 52753 53775 0 0 0
1000 57390 58540 59708 0 0 0
1100 62998 64291 65605 0 0 0
1200 68580 70016 71475 0 0 0
1300 74138 75715 77319 0 0 0
1400 79658 81377 83124 0 0 0
1500 85135 86994 88884 0 0 0
1600 90572 92570 94602 0 0 0
1700 95963 98100 100272 0 0 0
1800 101324 103598 105910 0 0 0
1900 106630 109040 111491 0 0 0
2000 111827 114371 116957 0 0 0
2100 116912 119586 122305 0 0 0
2200 121849 124650 127498 0 0 0
2300 126606 129529 132501 0 0 0
2400 131185 134225 137317 0 0 0
2500 135556 138708 141914 0 0 0
2600 139691 142950 146264 0 0 0
2700 143566 146924 150339 0 0 0
2800 147286 150739 154252 0 0 0
2900 150966 154514 158122 0 0 0
3000 154590 158232 161935 0 0 0
3100 158171 161904 165701 0 0 0
3200 161810 165636 169528 0 0 0
3300 165523 169445 173434 0 0 0
3400 169270 173289 177375 0 0 0
3500 173001 177115 181299 0 0 0
3600 176705 180915 185196 0 0 0
3700 180415 184719 189097 0 0 0
3800 184192 188594 193071 0 0 0
3900 187902 192399 196973 0 0 0
4000 191631 196224 200895 0 0 0
4100 195348 200036 204804 0 0 0
4200 199097 203881 208747 0 0 0
4300 202813 207693 212656 0 0 0
4400 206485 211459 216519 0 0 0
4500 210171 215239 220395 0 0 0
4600 213871 219035 224288 0 0 0
4700 217575 222834 228183 0 0 0
4800 221318 226673 232120 0 0 0
4900 225053 230504 236049 0 0 0
5000 228940 234362 239872 0 0 0
5100 232100 238214 244425 0 0 0
5200 235339 242096 248962 0 0 0
5283 238260 245278 252410 0 0 0
10 of 13
Centralizer calculation
Dogleg Hole ID (in) x Pipe OD Side F. per Cent. Standoff @ Standoff @ mid Side F. @
MD (ft) Inc (deg) Azi (deg) Axial F. (lbf) Cent. type Part No. Spacing (ft)
(deg/100ft) (in) joint (lbf) setting cent. (%) span (%) cent. (lbf)
11 of 13
Dogleg Hole ID (in) x Pipe OD Side F. per Cent. Standoff @ Standoff @ mid Side F. @
MD (ft) Inc (deg) Azi (deg) Axial F. (lbf) Cent. type Part No. Spacing (ft)
(deg/100ft) (in) joint (lbf) setting cent. (%) span (%) cent. (lbf)
38 2672 48.30 174.34 3.75 16.000 x 13.375 52919 519Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 89 90.6 70.0 1155
39 2761 49.62 174.17 0.87 16.000 x 13.375 50896 928Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 76 90.6 70.4 1762
40 2837 49.91 174.04 0.19 16.000 x 13.375 49196 886Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 77 90.6 70.3 1705
41 2914 50.33 173.82 1.14 16.000 x 13.375 47487 759Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 80 90.6 70.4 1517
42 2994 51.13 173.50 0.76 16.000 x 13.375 45734 858Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 78 90.6 70.3 1663
43 3071 51.70 173.45 1.55 16.000 x 13.375 44061 1528Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 67 90.6 70.6 2540
44 3138 50.70 173.08 1.55 16.000 x 13.375 42618 1416Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 68 90.6 70.3 2407
45 3206 49.90 172.57 1.18 16.000 x 13.375 41114 1299Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 70 90.6 70.3 2258
46 3275 49.29 172.23 0.90 16.000 x 13.375 39555 1201Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 71 90.6 70.2 2131
47 3346 48.92 172.91 0.90 16.000 x 13.375 37945 1006Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 74 90.6 70.4 1862
48 3420 49.18 174.11 1.36 16.000 x 13.375 36266 978Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 75 90.6 70.4 1821
49 3495 49.44 174.76 0.41 16.000 x 13.375 34585 963Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 75 90.6 70.2 1806
50 3570 49.74 174.74 0.82 16.000 x 13.375 32902 988Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 75 90.6 70.1 1840
51 3644 50.01 174.22 1.91 16.000 x 13.375 31239 1446Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 68 90.6 70.2 2441
52 3712 48.72 174.06 1.91 16.000 x 13.375 29717 961Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 75 90.6 70.1 1801
53 3787 49.04 173.96 1.24 16.000 x 13.375 28010 952Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 75 90.6 70.2 1785
54 3862 49.44 173.92 0.27 16.000 x 13.375 26314 1071Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 73 90.6 70.4 1941
55 3934 49.35 173.82 0.76 16.000 x 13.375 24681 973Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 75 90.6 70.2 1813
56 4009 49.75 173.28 0.76 16.000 x 13.375 23007 1167Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 71 90.6 70.3 2072
57 4080 49.20 173.50 0.95 16.000 x 13.375 21410 1054Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 73 90.6 70.1 1924
58 4153 49.17 173.61 0.57 16.000 x 13.375 19758 1000Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 74 90.6 70.5 1838
59 4226 49.46 173.68 0.32 16.000 x 13.375 18100 1058Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 73 90.6 70.4 1917
60 4299 49.43 173.98 0.32 16.000 x 13.375 16468 906Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 76 90.6 70.3 1711
61 4374 50.57 173.59 1.57 16.000 x 13.375 14787 1154Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 71 90.6 70.3 2048
62 4445 49.89 174.02 1.96 16.000 x 13.375 13215 1106Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 72 90.6 70.5 1977
63 4517 49.45 174.49 1.08 16.000 x 13.375 11613 998Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 74 90.6 70.3 1833
64 4590 50.08 174.56 0.56 16.000 x 13.375 9969 1091Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 72 90.6 70.1 1964
65 4662 49.68 174.44 0.56 16.000 x 13.375 8363 1090Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 72 90.6 70.1 1962
66 4734 49.09 174.14 0.97 16.000 x 13.375 6740 773Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 78 90.6 70.5 1508
67 4812 49.15 173.63 1.13 16.000 x 13.375 5430 319Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 98 90.6 70.0 783
68 4910 49.13 173.44 1.18 16.000 x 13.375 4754 324Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 98 90.6 70.1 790
69 5008 48.93 173.65 0.73 16.000 x 13.375 4081 322Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 98 90.6 70.2 784
70 5105 48.76 173.52 1.02 16.000 x 13.375 3405 317Standoff Rigid SpiraGlider HD-13 3/8-7-Straight1600 98 90.6 70.1 776
71 5203 48.76 172.97 0.96 16.000 x 13.375 2724 1561Spacing Rigid SpiraGlider SC-13 3/8-7-Spiral1600 40 90.6 87.7 1570
72 5243 49.12 172.59 1.20 16.000 x 13.375 1357 1578Spacing Rigid SpiraGlider SC-13 3/8-7-Spiral1600 40 90.6 87.7 1578
73 5283 49.50 172.20 1.20 16.000 x 13.375 0 1578Spacing Rigid SpiraGlider SC-13 3/8-7-Spiral1600 40 90.6 87.7 1578
12 of 13
0
Side force after cementing
400
800
1200
1600
2000
TVD (ft)
2400
2800
3200
3600
4000
4400
13 of 13