Professional Documents
Culture Documents
(FRAME COMPONENT)
JOSAFAT S. BAYLOSIS
APRIL 2022
i
ii
DEDICATION
Endless thanks and gratitude to the persons who have inspired and
To his cousin
To his mother Alberta S. Baylosis and his late father Alberto L. Baylosis;
To his classmates, friends and relatives who supported him through the end of
his study;
J.S.B.
iii
ACKNOWLEDGMENT
Minadanao, Kidapawan City Campus, for her invaluable help, motivation, and
and Research Extension for the support and letting us to make and finish the
study;
Engr. George F. Gamolo, his adviser for their knowledge, support, time,
Engr. Jimmy D. Rama, the Dean of College of Engineering, for his pieces
Last but not the least, he would like to thank his family for their
support, efforts, and trust to complete this study, especially Manoy Marcelino and
to his wife Manding, relatives, cousins and to all his friends for their love,
Above everything, the researcher is grateful to the Almighty God for his
unfailing love, strength, grace, care, guidance, knowledge, and wisdom that
helped the researcher to be strong and enabled his to complete his modest task
of achievement effectively.
iv
JOSAFAT S. BAYLOSIS
Researcher
ABSTRACT
The study aimed to design and fabricate a frame for manually – operated
rice transplanter that could hold all the other components of the machine for
faster methods of rice transplanting. To develop this project, the step-by-step
process was being followed. The frame of manually – operated rice transplanter
was constructed with the aid of machine design principles acing the supporting
multi-force members of all other parts of the manually operated rice transplanter
machine. The frame is made up of a 1 in x 1 in x 1.5 mm tubular pipe which is
120 cm in length, 50 cm in width and weighs almost 14 kg. The floater which can
make the performance of the machine smooth, easy and leveled the rice paddy
was rivetted at the bottom part of the frame was made of a 4 ft x 8 ft x .9 mm of
plain sheet. A 150 cm handle is fabricated in front of the frame where can
operator able to operate the machine. A little revision was done on the shafting
guide of the wheel where the size was being adjusted into ½ of its original size
for the wheel to make it more functional. The functionality of the frame
component of the manually – operated rice transplanter was determined based
on the results gathered from the testing conducted. Based on the findings
gathered after designing and testing the machine frame structure, the researcher
concludes that the fabricated machine frame structure was capable of supporting
the parts of the manually – operated rice transplanter.
v
TABLE OF CONTENTS
PRELIMINARIES Page
Title Page i
Approval Sheet ii
Dedication iii
Acknowledgment iv
Abstract v
Table of Contents vi
List of Figures ix
List of Appendices x
INTRODUCTION 1
Conceptual Framework 7
METHODOLOGY
Bill of Materials 8
vi
Tools and Equipment Needed 9
Labor Cost 10
Project Cost 10
Project Design 11
Construction Schedule 11
Procedure of Construction 12
Operational Procedures 13
Maintenance 13
Summary 18
Conclusions 18
Recommendations 19
LITERATURE CITED 20
APPENDICES 21
vii
LIST OF TABLES
1 Bill of Materials 8
3 Labor Cost 10
4 Project Cost 10
5 Fabrication Framework 11
viii
LIST OF FIGURES
ix
LIST OF APPENDICES
A Operational Manual 22
D Curriculum Vitae 31