Professional Documents
Culture Documents
Assignment 02&03
Assignment 02&03
Assignment 2
Part-I (Using Transformation equation of plane stress)
The state of stress at a point on the element is shown by the following figures:
a) Represent these state of stresses on the element oriented 30o counter clockwise from the
position shown.
b) Represent these state of stresses on the element oriented 50o clockwise from the position
shown.
c) Determine the principal stress for each element.
d) Represent these states of stresses on the element inclined by plane of maximum shear
stress.
600KPa 500KPa
400KPa 800KPa
700KPa
600KPa
i ii iii
Part-II (Using Mohr’s circle of plane stress)
Assignment 3
Part-I (Using Direct Integration Method)
2m 2m 2m 2m
A C B
Part-I (Using Moment Area Method)
2m 1.5 m 1.5 m
A C B