Professional Documents
Culture Documents
DESCRIPTION: APPLICATION:
A ready to use, cementations decorative colored render. It ▪ The surface should be clean and free from dust,
consist of a mortar made up selected sand, Portland cement, paint and all lose particles. Dampen the surface
pigments, additives to increase impermeability and bonding before application.
strength, light weight aggregate and other. Plaster Stone ▪ Mix the material with the same quantity of water
Finish produces wide range of colors for further customer for each mix to avoid shading. 6-7 liter can use.
satisfaction. ▪ Apply the mix directly on a dampened substrate
on average thickness of 8.0 - 10mm by trowel.
ADVANTAGES: ▪ Carefully level and smooth the render, and when
the mortar starts to harden, spatter the desired
▪ Crushed Marble Plaster is a pre-bagged high quality crushed marble & glass at rate of 5-6 kg/m2.
render coat, fast and easy to use, it requires only ▪ Using flat steel trowel, press the crushed marble
addition of water on the site prior to use. into the render to insure all particles fully bonded
▪ It is practically crack free due to the cellulose fiber with the material.
added to the material. ▪ Do not apply the material if rain predicted.
▪ Its water and weather resistant, it is suitable to be
using in hot and humid weather as well as cold TECHNICAL PROPERTIES:
weather.
▪ It can used as finished plastering directly on block, Type of binder Portland Cement
bricks, or finished plastering, with high bond
strength on the substrate. Filler Selected Silica Sand of
0.8mm max
▪ It can offered with a variety of colors to satisfy all
Dry Density 1.4 - ±0.1 kg./Ltr.
tastes of clients.
▪ Its economical comparing to other traditional ways Wet Density About 1.7 ± 0.1 kg/Ltr.
of finishing, like marble or stone cladding, as well as
more durable comparing to different kind of paints. Flexural Strength 4.0 N/mm²