Page A-6 PW1660/00 Operation Manual 880830
A.3 DESCRIPTION OF OTHER MENU FORMS
A.3.1 Measurement
‘The measurement menu is shown in the next example.
MEASUREMENT
Normal
Sample changer
Measuring program
Selection : Normal
This form enables the execution of a measurement.
NORMAL : For measurement of samples without using a sample changer. The measured channels
are those indicated in the measuring program.
SAMPLE CHANGER : For the measurement of samples using the PW1500/05 or /08 and PW1510/05 or 06
MEASURING PROGRAM : This item leads to an action form that enables the selection of both fixed and
Programmable goniometer channels that must be measured. In addition, the measuring
time and waiting time before measurement (delay time) are also defined via this form. For
more details, see section A.3.8.
A.3.2 Configuration
This menuform contains the items leading to action forms meant for the assembly of the system configu-
ration and the channel configuration and is shown in the next example.
SYSTEM CONFIGURATION : This is meant for the assembly of the configuration of the system.
FIXED CHANNELS ~ SCALERS : This is meant for the assembly of the channel configuration.
PROGRAMMABLE GONIOMETER CHANNELS : This is meant for the assembly of the channels for the
PW1661/00 Programmable Goniometer.
»