Page A-22 PW1660/00 Operation Manual 880830
A.3.19 Communication Protocol Parameters
This form allows editing of the communication protocol parameters and is shown in the next example.
COMMUNICATION PROTOCOL PARAMETERS 26-may-e8 1
196222
Port : vdu/eomp — aux.2 une
Time out time (sec.> 24 s
Max. nr of tries : infinite 6 >
Noburfer delay time (sec.) = 3 5
Response delay time (sec. = 1.00
Transmit protocol fer pert aux.1 = 1801745
Ceait, 72: Bait )
Countrates of @ quantitative measurement may be transmitted to a remote computer (Port aux.1)
According to the selections in the spectrometer parameters form, transmission is automatic and manu-
ally.
Two types of communication are possible:
1, ISO 1745 protocol transmission.
2. No Protocol transmission.
Refer to Appendix D of this manual for the layout.
A.3.20 Status Display
This form gives information on the status of the spectrometer and is shown in the next example.
STATUS DISPLAY 26-may-88 10257242
Sample: in loading position Measurement mode : no measurenent
Hedium : vacuum + Programmable goniometer —--+
1 1
Vacuum fever (Par 3 | angie (degrees) 43.27 |
| Energy (kev) e000 |
Spinner = off Bet.gas £1: ok | {
Compr. air: on | Lower tever (9 23 '
ur zon ster on | Upper tever co 7 1
1
Water temp. «cr 92.24 1 7
Cabinet. temp. 26132 | '
Belts temp. cc) 0109 ' |
1 {
Automatic results printing Yes | t
Automatic results transmission ? No + aaa :
( Detasied status, 73: Detailed status
In case a programmable goniometer is mounted, the programmable goniometer parameters are also
displayed.