880830 Appendix A. Survey of Microprocessor Menu Forms Page A-3
and Error Messages
A.1 INTRODUCTION
This Appendix gives a description of all menu forms available when operating the PW1660/00 without an
externally connected computer.
In addition, a list of general error messages valid for the total system is given. Different errors for several
screens are for example given in section A.4.6.
A.2 MAIN MENU
The main menu form is shown in the following example.
Fui660 MAIN MENU version 1.0 26-may-88 10:06:51
Measurement
Channel calibration
Configuration
Parameter settings
Test and diagnostics
Help system explanation
A.2.1 Description of Main Menu
The main menu gives a survey of possibilities which can be used when operating the PW 1660/00 Simulta-
neous X-ray Spectrometer. An application is selected by typing at least the number of significant charac-
ters indicated for that item followed by , for example "M" for measurement, “Ch” or “ch” for
channel calibration.
As @ result of such a selection, the system may display another menuform action form or an error me:
sage on the current menu form. The latter applies in case the selection was invalid.
1, Measurement:
for the execution of a measurement with or without a sample changer or for changing the measure:
ment parameters.
2, Channel Calibration
for the calibration of a channel such as pulse height distribution measurements and goniometer angle
calibration if channels are assembled for the programmable goniometer channel PW1661/00.
3. Configuration:
for the assembly of the system configuration and channel configuration.