880830 Appendix A. Survey of Microprocessor Menu Forms Page A-27
and Error Messages
A.3.27 Sample Changer Test
This form gives information about the sample changer and is meant for testing.
SAMPLE CHANGER TEST 26-may-88 10:45:04
1 PWI510, 6 positions, barcode
2 ready
aray present yes Barcode = e0000295
Tray position a
Saaple in changer ne Grab status = Neutral Low
s1 s2 sa se
swatches bout Ta oue in
C Next tray, Move tray, Load, Unload, 73: /
It gives information on the tray, tray position sample and some hardware switches. More information can
be found in the service manual
A.3.28 Stability and Reproducibility
This menuform contains the items leading to action forms which enable the execution of measurements
fof testing the reproducibility and stability.
GONIOMETER REPRODUCIBILITY : Measurements to calculate the reproducibility of the PW1661/00 Pro-
grammable Goniometer,
STABILITY TESTS = Measurements to calculate the instrument stability.
For more information, reference should be made to the corresponding test forms.
STABILITY ANU REPRODUCIBILITY 2o-may-s 1024"
Stapility tests
Gontometer reproducibility
Selection = Stabality tests