880830 Appendix A. Survey of Microprocessor Menu Forms Page A-19
and Error Messages eA
A.3.15 Calibrate Programmable Goniometer Zero Offset
This option allows the calibration of the zero offset of the programmable goniometer and the form is
shown in the next example. A pre-selected channel is chosen for the calibrate angle (refer to program-
mable goniometer channels form).
CALIBRATE PROGRAMMABLE GONIONETER ZERO OFESET 26-may-88 10:20:18
channe1 cut
Eneray (kev)? “8.040
Stepsize o-01
Tinesatep 120
sample ident.
Peak (KcrS) : 616.122
O14 peak 25.03
New peak a5 loa
Difrerence ‘O100
org ofrset na.
aacezaal92 450025212 -a5122.” shew offaee at
C Edit, Start, abort, 732 Bait
The difference between the current calculated angle and the theoretical angle is the offset,
Edit can change the input fields.
Start starts the measurement.
If the measurement is finished and the new offset is different from the old offset, the menu line will be
replaced by the question:
“save the new zore offset (¥/¥1"
More information: see CALIBRATE GONIOMETER ANGLES.