Professional Documents
Culture Documents
TENDER SCHEDULE
NAME OF WORK:- Constration of Cement Concrete Road at Scheme No. 5 Near P/No 1269
4 Deduction for item No.4.1, 4.2, 4.3, 4.4, 4.5, 4.6 & 4.8 if
vibratory roller / motor grader is not used with prior
written approval by C.E. :
If static roller is used in place of vibratory roller.
If motor grader is not used. 50.00 m3 2<./4.9(i)
- 50.00 m3 2414.900
5 Providing, laying, spreading and compacting stone aggregates
of specific sizes to water bound macadam specification
including spreading in uniform thickness, hand packing,
rolling with vibratory roller 8-10 tonnes in stages to
proper grade and camber, applying and brooming
requisite type of screening/ binding Materials to fill up
the interstices of coarse aggregate, watering and
compacting to the required density as per clause 404 of
specification.
Grading-1 (63 to 45mm)
Grading-11 (53 to 22.4mm) 10.00 1347.00 m3 24/4.8(0(a)
14.62 1250.00 m3 24/4 Egli)
6 Deduction for item No.4.1, 4.2, 4.3, 4.4, 4.5, 4.6 & 4.8 if
vibratory roller / motor grader is not used with prior
written approval by C.E. :
If static roller is used in place of vibratory roller.
If motor grader is not used.
- 50.00 :113 24/4.90)
50.00 m3 24/4S(ii)
7 Construction of dry lean cement concrete Sub- base 9.50 2767.00 :n3 35/5.1
over a prepared sub-grade with coarse and fine aggregate
conforming to IS: 383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed
15:1, aggregate gradation after blending to be as per table
600-1, cement content not to be less than 150 kg/ cum,
optimum moisture content to be determined during trial
length construction, concrete strength not to be less than
10 Mpa at 7 days, mixed in a batching plant, transported to
site, laid with a paver with electronic sensor, compacting with
8- 10 tonnes vibratory roller, finishing and curing as per
clause 601 of specification complete in all respect.
E Deduct from Item No.6.1 above if paver with electronic 150.00 m3 26/52
sensor, vibratory roller are not used and laying, compaction is
done by any other method.
(The acceptance criteria regarding level, thickness,
surface regularity, texture finish, strength of concrete and all
other quality control measures shall be the same as in
case of machine laid work.) .
10 Deduct from Item No.6.3 & 6.4 above if paver with 350.0C m3 37/6.5
electronic sensor is not used and laying, compaction is
done by any other method
(The acceptance criteria regarding level, thickness,
surface regularity, texture finish, strength of concrete and all
other quality control measures shall be the same as in
case of machine laid
work.)
11 Add extra in item no. 6.3,6.4,6.6&6.10 above for the cost of 229.06 63587.00 MT 37 /63
steel in dowel bar and tie rod including craddle laps etc. 0.229
complete required as per design.
--\\
c
En A.E. E.E.
J.D.A. f. D.4.