The document provides a manufacturing process description sheet for a furrow wheel plate part. It details the operations needed to machine the part from a mild steel blank, including facing, turning, step turning, drilling, grinding, and tapping. The sheet specifies the part number, order details, material, machining operations, tools required, inspection steps, and approvals.
The document provides a manufacturing process description sheet for a furrow wheel plate part. It details the operations needed to machine the part from a mild steel blank, including facing, turning, step turning, drilling, grinding, and tapping. The sheet specifies the part number, order details, material, machining operations, tools required, inspection steps, and approvals.
The document provides a manufacturing process description sheet for a furrow wheel plate part. It details the operations needed to machine the part from a mild steel blank, including facing, turning, step turning, drilling, grinding, and tapping. The sheet specifies the part number, order details, material, machining operations, tools required, inspection steps, and approvals.
Manufacturing Process description sheet ISSUE NO. Page 1 of 1
Part no. Order Date---------------- Work Dispatched Date-------------------
Specify your factory in the above box Customer Name: Job O. Title of parts: Ord. Qty Part no: Pro.No. Cost Sheet No: No. 01 DPTI-004-18 DPTI-004 Ethio-Engineering group Furrow wheel plate Material Code Material type Blank size Accessory Starting date: Delivery date: Mild steel Ф 75 x 75 mm Planned time Actu perfo Depth No of Tools Measuring Inspected S/N OPRN Operation description Feed RPM Set up al rmed of Cut path Mach. Total used tools by Time time by Time Time
Face and turn to Ф 70 x 74 mm 10 min 40 min 30 Face, caliper
30 01 L Step turn to Ф 48.9 x 48mm in one side and min min turn and Ф 34.5 x 14 mm in other side. drill cutter Drill to center with Ф13 x 46 mm Make grind upper step round parts to flat 10 min 10 20 min 20 Drill bit caliper 02 M shape with 29 mm min min Tap Make thread upper drilling part with M 10 min 10 20 min 20 tap caliper 03 14. min min NOTE: -CHECK ONE PIECE FIRST BEFORE MAKING ALL QUANTITY
Prepared by: BIRUK AND AMANUEL Approved by: ASHENAFI Issuing dept.: R & D(EEG) Receiving company: