The document provides an analysis report of raw and treated water from an ETP plant in Pabna, Bangladesh. Key findings include:
- Raw effluent had a pH of 6.17, temperature of 31.1°C, TDS of 1486 ppm, and COD of 560 ppm.
- Treated effluent met most standards except for electro-conductivity which was 2860 μS/cm against a limit of 1200 μS/cm. It had a pH of 7.45, TSS of 115 ppm, TDS of 1333 ppm, DO of 6.25 ppm, COD of 32 ppm, and BOD of 15 ppm
The document provides an analysis report of raw and treated water from an ETP plant in Pabna, Bangladesh. Key findings include:
- Raw effluent had a pH of 6.17, temperature of 31.1°C, TDS of 1486 ppm, and COD of 560 ppm.
- Treated effluent met most standards except for electro-conductivity which was 2860 μS/cm against a limit of 1200 μS/cm. It had a pH of 7.45, TSS of 115 ppm, TDS of 1333 ppm, DO of 6.25 ppm, COD of 32 ppm, and BOD of 15 ppm
The document provides an analysis report of raw and treated water from an ETP plant in Pabna, Bangladesh. Key findings include:
- Raw effluent had a pH of 6.17, temperature of 31.1°C, TDS of 1486 ppm, and COD of 560 ppm.
- Treated effluent met most standards except for electro-conductivity which was 2860 μS/cm against a limit of 1200 μS/cm. It had a pH of 7.45, TSS of 115 ppm, TDS of 1333 ppm, DO of 6.25 ppm, COD of 32 ppm, and BOD of 15 ppm
ETP Raw and Treated water (Outlet) analysis report
Sample Location : STL & SFBL, ETP, Pabna plant
Type of Plant : Anaerobic, Anoxic & Aerobic Treatment Test Frequency : Weekly Sample Received date: 26.07.2022 Sample Received By : Kazi Abdul Malek Date of testing : 26.07.2022 Lab Sample ID : QA-28/22
Sample Parameter Unit Result Remarks
pH - 6.17 Temperature °C 31.1 Raw Effluent Total Dissolved Solid (TDS) ppm 1486 (Homogeneous Tank) Electro – Conductivity (EC) µS/cm 2745 Dissolved Oxygen (DO) ppm 0.18 COD ppm 560
Sample Parameter Unit Standard Result Test Method Remarks
Color - Colorless Colorless Odor - Absent Absent Temperature °C NMT 40 33.0 pH at 26.4° C - 6 to 9 7.45 pH, USEPA electrode method
Treated Total Suspended Standard methods(2005), 2540D
Electro- ppm NMT 150 115 & EPA(1983) method Effluent Solid(TSS) 160.2(Residue, non-filterable) Conductivity (Clarifier Total Dissolved ppm USEPA Direct Measurement found out of NMT 2100 1333 limit. Tank Solid (TDS) Method1, 2 ,Method 8160
Note: Sludge Quantity (Biological Oxidation Tank) of ETP: 450 ml/lt. Water flow rate of the inlet water was 6.0 m³/hr. whereas the capacity of the ETP plant is 6 m³/hr.