Professional Documents
Culture Documents
Electrical Circuits
Electrical Circuits
Name:Andrea Tolosa
Team:
Group:2º B
Date:2/2/23
INDEX
We are going to place five light bulbs with nails and cables, in order to get the
current to pass everywhere, and thus get all the light bulbs to light up, for this we will
put screws all over the circuit,
To place the cable, with pliers we will peel the two ends, so that the current can be
passed through the screws.
-Insulation: that recovers and contains the electrical flow in the conductor.
-Auxiliary elements: that protect the cable and guarantee its longevity.
-Cover: covers all materials only protecting them from the outside.
Technical principles:
The electrical circuit has a rectangular base, made of wood. In which we will place
the bulbs and the nails.
We will cut the cable with pliers or scissors and we will put the nails with a hammer.
1
3. INFORMATION
The circuits consist of passing electricity through them, with the help of conductive
materials such as wire, since they carry electricity through them and a battery.
With the circuits we can pass current and thus get some light bulbs to light up and
make them give light.
An electrical circuit is the set of electrical elements connected to each other that
allow the generation, transport and use of electrical energy in order to transform it
into another type of energy.
4. PLANS
2
5. LIST OF MATERIALS AND TOOLS
TOOLS
-1 pair of scissors
-1 pliers
-1 hammer
-1 pencil
MATERIALS
-3 meters of wire/cable
-nails
-5 light bulbs
-4 clips
6. MAKING PLANS
1st
Let's draw the circuit on the wooden board.
2nd
Let's start to put the bulbs in the places indicated by the plans with the help of the
nails and then we will proceed to put nails throughout the circuit.
3rd
When we already have the bulbs and the nails, we will put the cable around the
entire circuit, stripping the ends with the help of the pliers, so that the current passes
through the nails and bulbs.
4th
When we have all that done, we will place the clips between two nails, in the three
places indicated on the plans. Finally we will place the battery.
1st day
Let's take the board and let's draw the circuit on it. When we already have the circuit
drawn, we will begin to place the bulbs and nails with a hammer.
2nd day
Today we will finish placing the bulbs and the nails and we will begin to put the
cables throughout the circuit, in order to make the current pass, peeling the ends
with the help of pliers and we will put it around the nails. 3
3rd day
Today we will finish laying the cable.
4th day
Today we will place more clips in the places indicated on the plan and we will put the
battery.
8. ESTIMATE OF COST
Nails 20 0,05 1
TOTAL 15,96
9. DIFFICULTIES
By measuring the distance of the nails with the battery, and getting all the bulbs to
light up.
10. BIBLIOGRAPHY
-https://www.google.es/search?q=tradcutor&ie=UTF-8&oe=UTF-8&hl=es-es&client=s
afari
-https://www.google.es/search?q=propiedades+de+un+cable&ie=UTF-8&oe=UTF-8
&hl=es-es&client=safari 4