To simplify the calculations, the following assumptions are made:
ꞏ assume riser pipe flow is orifice flow through the top of the pipe only ꞏ riser pipe head is 300 mm, i.e. the height between the top of the pipe and the spillway crest level
Qspillway = Q10 – Qriser
Q10 = 0.06 m3/s
1/2 Eq.20.2; Qriser = Cd Ao (2g Ho)
Orifice discharge coefficient Cd = 0.62 Cd
Gravity g= 9.81 m/s² Orifice size Do = 50 mm or 0.05 m Do Efective head from ctr Ho = 0.3 m Ho opening Outlet riser size D= 300 mm or 0.3 m so; Ao = 0.07071 Qriser = 0.106 m³/s
so that; Qspillway = -0.050 m³/s
Eq.20.9; Qspillway = CSP . B. Hp1.5
use trial & error;
Spillway basewidth, B= 1 m Chart 20.2; Spillway discharge coef. CSP = 1.57 Effective spillway head, HP = 0.2 m
so that; Qspillway = 0.140 m³/s > -0.050 m³/s OK!
Therefore, the total basin depth including the spillway is 1.20 m