Professional Documents
Culture Documents
Project
Project
Rubrics
Performance Lab Report
Description Total Obtained Description Total Obtained
Marks Marks Marks Marks
Experiment 10 Organization/ 05
Related Structure
knowledge
Data Analysis 10 Data 05
Presentation
Total Marks Total Marks
Obtained Obtained
Remarks ----------------------------
Signature ----------------------------
School of Electrical Engineering
The University of Faisalabad
Theory:
Transformer
Transformer 12-0-12 was used to convert 220 Voltages AC TO 12 V AC
Bridge:
Bridge is a Electrical Componet which converts Alternating current to Pulsating
DC.
School of Electrical Engineering
The University of Faisalabad
Capacitor:
In this project the Capacitors were used to smooth the current from pulsating DC to
Pure DC.
Voltage Regulator:
7805 is the voltage regulator used in this project it Convert 12 V to 5 V.
LED:
LED is used as indicator in this lab .
School of Electrical Engineering
The University of Faisalabad
Resistance:
In this project the resistance of 1K was used with LED To give proper voltage to
LED.
Connector Sills:
Connector sills are used to give input and take output from the project.
Procedure:
First we connected the circuit temporarily on the Bread Board.
Then we give it Power Supply
Then we checked Input and Output.
Our output at the end was 5.02 V
Then we took A Varo board.
Placed all the Components One by One on it.
Then we took Soldering Iron ,Soldering Wire, Paste Etc.
Then we solder all the components one by one on it and made the
connections using Jumpers and soldering wire
Then we give it Input supply.
The light started glowing
Then we checked the output voltage by Multimeter.
The output voltages were 5.02 V DC.
School of Electrical Engineering
The University of Faisalabad
Circuit Diagram:
Project Diagram:
School of Electrical Engineering
The University of Faisalabad
Connection Diagram:
Conclusion:
In this project we get 5V Dc output from 220V AC.