Professional Documents
Culture Documents
Trong khi đó, vớ i Man-made Process, đề bài có thể đề cậ p đến quá trình tạ o ra mộ t sả n
phẩ m nào đó như cafe, trà, v.v còn dạ ng thứ 3 là sẽ ít ra hơn nhưng sẽ đề cậ p đến sự tác
độ ng củ a các hoạ t độ ng sả n xuấ t củ a con ngườ i trong tự nhiên.
Đâu là điểm khởi đầu và điểm kết thúc của quá trình?
Process này thuộc dạng Circular (Quá trình Tuần hoàn, có điểm bắt đầu và kết
thúc trùng nhau) hay Linear (Quá trình tuyến tính, có điểm đầu và điểm cuối
riêng biệt)?
Có tổng cộng bao nhiêu bước trong quá trình?
Quá trình này là thuần về tự nhiên hay nhân tạo?
Có gì được thêm vào trong quá trình hay không?
Chức năng của mỗi bước/giai đoạn là gì?
Có quan hệ nào giữa các bước/giai đoạn hay không?
Kết thúc quá trình, sản phẩm nào được tạo ra?
The important things to remember when you write about a process are:
To begin, the cocoa comes from the cacao tree, which is grown in the South
American and African continents and the country of Indonesia. Once the pods
are ripe and red, they are harvested and the white cocoa beans are removed.
Following a period of fermentation, they are then laid out on a large tray so
they can dry under the sun. ..
Lỗi 1: Sự đồng nhất giữa chủ ngữ và động từ ( Subject – Verb Agreement)
Ví dụ :
Như đã đề cậ p ở trên, dạ ng Process thườ ng không nêu rõ chủ thể/ngườ i thự c hiện hoạ t
độ ng diễn ra trong quá trình. Vì vậ y vớ i câu bị độ ng, vế “by…” có thể đượ c bỏ qua, không
cầ n viết đến.
Lỗi 4: Lặp quá nhiều câu đơn, làm bài trở nên máy móc
Overall, it is patently obvious that there are + “ number” prominent stages in this
process, initiating with + V-ing, and culminating in + V-ing.
The picture illustrates the process in which plastic bottles are transformed into clothes.
Overall, it is apparent that there are three main stages involved in this recycling process,
including the collection and classification of plastic bottles, the preparation for plastic
pieces and the production of clothes.
At the beginning, used plastic bottles of different sizes are gathered before being loaded
onto trucks and transported to the factory. There, as soon as the bottles are sorted out,
they are shredded=cut into minuscule pieces. These pieces are then washed and left in
the sun to dry for 10 hours.
Following this, once the plastic pieces are dry, they are put in a boiling machine, after
which the water is strained off, resulting in melted plastic. At this point, the melted
plastic is spun into flexible yarn which is later woven into fabric. The final stage is when
the fabric is neatly rolled up and ready to be made into garments.