Professional Documents
Culture Documents
No ACTIVITY DESCRIPTION
3 Materials Submittal
5 Water Test
H-HOLD POINT
W-WITNESS POINT
RW-RANDON WITNESS
NA
ITP FOR REINFORCEMENT ,FORMWORKS & CONCRE
ACCEPTANCE CRITERIA
For Every
- 06 no’s for every 50cum cubes should be casted. (03nos for 7days
& 03nos for 28 days strength) ,For Final Results acceptance is mean
of last 4 consecutive Test sample should be atleast 3Mpa morethan
specified Strength ,And any individual mean Strength value should
be not less than specified Strength Minus 3 Mpa
Beam ,wall ,column Side 1 day,soffit of slab 4 days with prop, Beam
soffit 10day with prop,as specificed in MS
As per Spec and Refer ACI code All setting out dimensions, lengths of
beams nd slabs, storey heights +-6 mm
-Cross-sectional dimensions of concrete members ± 6mm
-Surface levels of floor slabs - Generally (in 3 m of length) ± 6mm
-Local undulations ± 3mm
-Plumbs of columns and walls - In a storey height ± 6mm
- In full building height ± 20mm
A stage in the production cycle when inspection and /or test to be performed to determine the acceptability of an i
A Document to be Reviewed by Responsible Authority and Approval or Approved with Comments required to proce
Witness point – A stage in the production cycle when a third party inspector/Consultant, Client representative witn
( Required Inspection Document like RFI,MIR etc)
Randomly Client or Consultant can be checked/Witness the ongoing process to meet the Specs & Procedure Require
Not applicable
RCEMENT ,FORMWORKS & CONCRETE WORKS
REPONSIBILITY
RECORD OF
REFERENCE DOCUMENTS
DOCUMENT
EMD SEM
IFC drawing
IFC drawing / Approved shop
Method statement for Shop drawing drawing s & MEP coordinated NA R&A
procedures
drawing & Transmittal.
d party inspector/Consultant, Client representative witnesses any inspection and or test to determine the acceptability of an it
ongoing process to meet the Specs & Procedure Requirements ( no any documents required)
ONSIBILITY
REMARKS
AHC
RFI for
H Reinforcement ,Formwork ,concrete
combined in one inspection
H
H