Professional Documents
Culture Documents
MAKITA CORPORATION
ISSUED February 24, 2007
Technical Support Section
Technical Support Dept.
DRAWN NO. MWSN-121-01 After-Sales Service Div.
General Manager K. Kubo
Information for Usage of The Thread Insert for Exhaust Dept. Manager K. Kubo
Valve Housing Section Chief N. Inoue
Drawn By Y. Fukuoka
ENGINE TYPE S26MC • L/S35MC • S42MC •S46MCC
First revision: Add the engine type, S46MCC (December 19, 2011)
Recently, we often received inquiry regarding the Thread Insert for exhaust valve housing. So, we
would like to inform you regarding the above-mentioned subject.
The Thread Insert, which is fixed in the female threads of the exhaust valve housing, is used and
inserted shown in the attached figure.
♦ Notice
If the Thread Insert is exchanged due to damage, it is necessary to use the special tool for repair.
When needed, you are kindly requested to place a purchase order to our service section.
*****************************
MAKITA SERVICE NOTE
*****************************
● ●
● ●
● ●