Professional Documents
Culture Documents
Test Plan:
John Deere Agri 8961A020 Data de publicação:
PUMP SPECIFICATION
Rotation: Clockwise.
Governor type: Mechanical all-speed.
Gov. Link Length: 41.50 ± 0.5 mm.
Governor spring position : See nameplate code.
Plunger Diameter: 7.0 mm (4 off).
Drive Type: Supported shaft.
Transfer pressure adjuster in end plate.
Advance Type: Automatic speed.
Scroll plate max. fuel delivery adjustment.
Boost control.
Solenoid voltage: See Service Instruction Note DT294.
OEM Code: Setting Code: 110L700/2/2390
PRE-TEST NOTES
Screw transfer pressure adjuster fully out and then 1.5 turns
in before commencing test.
Torque screw flush with inside of governor cover.
Advance Reading: Off the advance device.
Fit auto-advance gauge and set to zero.
A 2.0mm shim is fitted to the piston spring cap on assembly.
This must NOT be removed.
Additional shimming of (0.5 to 3.5 mm), may be required.
1/2
8961A020 Edição: 2
Test Plan:
John Deere Agri 8961A020 Data de publicação:
2/2