Professional Documents
Culture Documents
Title:
TSB 20200527_Guide to reset AO Smith WP after filter
replacement
Product/Model: Water Purifier – AO Smith Released Date: 27th May 2020
Prepared by: Giridhari Sahu Bulletin No: RESQ/TS/HA/2020 -014
Verified by: Shrikrishna Rewanwar Version No: 1.0
Background:
After Service / Filter Replacement in AO Smith WP recent model Z8 there is very less awarness in the field
know how to RESET the PCB .
पृष्ठभूमि:
AO Smith WP में सेवा / फ़िल्टर प्रफिस्थापन के बाद हाल ही में मॉडल Z8 अफिकाां श इां जीफनयर ां क पिा नहीां है फक
कैसे PCB क रीसेट करें ।
Purpose:
To create awarness regarding PCB RESET process after Service / Replace the Filter.
Guideline:
मदशामनदे श
1. WP will show following Error to replace Pre, Post and RO Filters as shown in fig ….
1|Page Ver1.1
2. As per above Indicator error. It is required to Service / Replace Pre, Post and RO Membrain
And after Filter Service / Replacement for RESET need to follow below steps as shown in fig ….
2|Page Ver1.1
After RESET the filter replacement error will not display in Pannel .
3|Page Ver1.1