Professional Documents
Culture Documents
Background:
Many Engineers don’t know how to test all component of washing machine from the PCB of
Samsung WM And what will be the Voltage of various Jack Points. Because of lack of knowledge
engineers replaces parts without testing and verifying. Which leads to repeat repair and part
consumption.
Purpose:
To diagnosis the fault and components test without opening the whole body of Samsung TLWM
Guideline:
PCB TEST
For testing PCB in Samsung TLWM we need to check the voltage of various points as
shown below figure.
1|Page Ver1.1
COMPONENT TEST
c) Then take a connection from Black wire and touch the same in red wire in motor jack
as shown in below fig.
Motor will rotate Anticlockwise.
f
2|Page Ver1.1
MOTOR CLOCKWISE ROTATION CHECK
d)Take the connection from black wire of pcb jack and touch the same in Blue wire of motor jack.
The motor will run clockwise.as shown in below fig .
e)Take Black wire connection from Input Jack of pcb touch the same in Black wire of 6 pin jack as
shown in below fig the Drain motor will work.
3|Page Ver1.1
3. INLET VALVE NO 1 CHECK
f) Take the Black wire connection from Input Jack of Main Pcb.
Then touch the same in Blue wire of 6 pin Jack as shown tn below fig.
Feed Valve 1 will work properly.
g) Take the Black wire connection from Input Jack of Main Pcb.
Then touch the same in Gray wire of 6 pin Jack as shown tn below fig.
Feed Valve 2 will work properly.
4|Page Ver1.1
5. SPIN TEST
h) Take the Black wire connection from Input Jack of Main Pcb.
First touch the same Black wire in the 6 pin jack and after 2 sec
5|Page Ver1.1