Professional Documents
Culture Documents
b) Let you are a BIWTA engineer and you are assigned in a dredging system. You have to deal with 7
a plain suction dredger. You are told to describe the function of this plain suction dredger and its
structure.
2. a) Define artesian and non- artesian aquifer with figure. State the discharge function when two 5
wells work together.
3. A 100 mm diameter tube-well is sunk to withdraw water from a 10 m thick confined aquifer 8
having co-efficient of permeability equals to 0.75 lps/m^2. The depth of water below the
piezometric level is 30m and it falls 2m in the tube-well while pumping. Calculate the discharge of
the tube-well when the radius of the circle of influence is 30m.
4. a). State the strainer in No-6 tube-well and differentiate the no.6 and moon tube-well 4
b). Describe guide bank, groyne and levees (Embankment) with figure. 6
5. Design a strainer for a 30 mm diameter tube-well to be operable by No.6 Hand Pump at the rate of 7
42 Lt/min. Slot No 10 to strainer having a 40% open area to be used, the entrance velocity should
be around 0.01m/s