Professional Documents
Culture Documents
PERFORMANCE CHECKING
The D- Shackle has been able to lift up to 4.82Ton load.
Before lifting the Dead loads by D- Shackle those were checked
ring and accessories.
through reference force proving
The load has been lift by D- Shackle up to 3 metre from surface and
transfers the same for
proper distance.
NO
AUTHORIeED SIGNATORY
TARUN DAS
Howrah E X
IN CHARGE ¢ALIBRATION)
Calibration Certificate
Issued to,
M/S. MAA VINDHYAWASINI
Certificate No.: 220609JSR/MVE/0148
ENTERPRISES Date: 25.06.2022
Noonidh New Colony, P.0- Jitpur, Dist-Dhanbad-828 309
Jharkhand
Traceability: Standardsused for calibration are traceable to National Standards through NABL accredited
laboratory
Environmental conditions of measurement Temp: 33 +2 °C.
Humidity: 50+5 %
PERFORMANCE CHECKING
The D- Shackle has been able to lift up to 4.8Ton load.
Before lifting the Dead loads by D- Shackle those were checked
through reference force proving
ring and accessories.
The load has been lift by D- Shackle up to 3 metre from surface and transfers the same for
proper distance.
AUTHORISEp.SIGNATORY
TARONPA
Howrah IN CHARGE (CALIBRATION)
CALIBRATION CERTIFICATE
ULR NOCC202921000007370 OF FORCE MEASURING DEVICE
Date of Calibration 14/11/2021 Certlificate No. FRI/11/21/13795
Next Calbration due on :14/01/2024 Date of Issue 14/11/2021
Capacity :50 kN
Type :Bow
Dial Gauge Make : Mitutoyo
1 Div. :0.01mm
Dial Gauge No. :ABA 637
2) Prior to each reading, the dial gauge was lightly tapped on the centre
of the dial cover.
3) The calibratilon is done as per IS: 4189-2014/ IS0: 376-2011.
4) The reported uncertainty is at coverage faclor k=2 which corespónds to
a
Authorised by :
Calibraled by Checked by:
Sr. Engineer
Scientific Asst. Scientiflc Asst. (R.V.Tambad)
(D.D.Magdum) (U.v.Patil)