Professional Documents
Culture Documents
Hilti PROFIS Engineering 3.0.88: WWW - hilti.group/content/hilti/CP/XX/en/non-transactional/light-pages/malaysia - HTML
Hilti PROFIS Engineering 3.0.88: WWW - hilti.group/content/hilti/CP/XX/en/non-transactional/light-pages/malaysia - HTML
88
www.hilti.group/content/hilti/CP/XX/en/non-transactional/light-pages/malaysia.html
Company: Page: 6
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Concrete - May 25, 2023 (2) (1) Date: 25/10/2023
Fastening point:
Hilti HAS-U threaded rod with HIT-RE 500 V4 injection mortar with 150 mm embedment h_ef, M20, Hot dip galvanized, Hammer drilled
installation per ETA 20/0541, with annular gaps filled with Hilti Filling set or any suitable gap solutions
86.5
y
231.5 231.5
145
extg bolt installed at site center
plate center
column
4.5 50.5
center
100.5
column (new
3 7
proposed 5
1.0
6.0
1 position)
115
0.5
93.0
x
201
86.5
100.5
4
5.0
2 6
1.0
30.5 9.5
150
36.0 4.0 91.0 4.0 175.0 8.0 98.5 46.5
Anchor x y c-x c+x c-y c+y Anchor x y c-x c+x c-y c+y
1 -191.5 38.5 - 526.5 - - 5 86.5 44.5 - 248.5 - -
2 -195.5 -59.5 - 530.5 - - 6 78.5 -60.5 - 256.5 - -
3 -96.5 45.5 - 431.5 - - 7 185.0 50.0 - 150.0 - -
4 -100.5 -54.5 - 435.5 - - 8 185.0 -70.0 - 150.0 - -
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2023 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan