Professional Documents
Culture Documents
UUT Range 10% to 90% RH, -10 to +50°C (Indoor), -50 to +70°C(Outdoor)
Calibrated Range NA
NA
Please Refer MR
NA
Job Type
NA Test Location NA
Dial Size
Work Instruction
Lab Temp. / Rh (22 ± 2)°C & (55 ± 10)% Site ambient Temp.
Test Reference
0 P/F
Check list 1
Check list 2
Unit Open?
Repaired By Date
The Unit Under Test (UUT) was calibrated using the following Laboratory Standard(s) whose accuracies are
traceable to National / International standard(s).
The Calibration results are given below and found to conform to the accuracy requirements at the test points.
Acceptable
Input Output Deviation
Error
0 ±1% FSD
25 ±1% FSD
50 ±1% FSD
75 ±1% FSD
100 ±1% FSD
Comments:
1. UUT tested as received.
2. The Uncertainty reported refers to the applied values only with no account being taken of the Instruments ability to maintain its Calibration.
The Uncertainty represents an expanded uncertainty using a coverage factor k=2 to approximate a 95% level of confidence. The contents of this
certificate apply only to the instrument and test conditions referred to within.
3. Acceptable error mentioned as per the manufacturer’s specification.
Approved Signatory
Calibrated by: Ashokan Badi ⃝ Shinod KP
Manager - Calibration
Calibration Date: 03/08/2023
Recommended -
Cal. due date: 02/08/2024 ⃝ Ummer Farooque
Asst. Manager - Calibration
End of certificate
This certificate may not be reproduced other than in full, except with the prior written approval of issuing laboratory.
Page 1 of 1
TEST CERTIFICATE
Certificate No. : C230708743 Date of issue: 07/08/2023
Job Ref. : SJ230717492 UUT Received on: NA
Customer: Al Zain Farms LLC
Muscat, S. O. Oman
Unit Under Test: Chiller
Manufacturer: Anaum
Model No.: AN 1020
Serial No.: TH-6270-05 Tag No.: Nil
UUT Range: 10% to 90% RH, -10 to +50°C (Indoor),
Calibrated
-50 toRange:
+70°C(Outdoor
NA
Ref. Procedure: NA
Test Temp. & R.H: NA
Test Location: Al Ansari Calibration Laboratory.
The Unit Under Test (UUT) was tested using the following Laboratory Standard(s) whose accuracies are
traceable to National / International standard(s).
Standard Serial No. Calibration Certificate No. Traceability
1. Portable Documenting Calibrator
8779 0512648 Accredited By UKAS
2. Thermo Hygrometric Transmitter
15029405 C230186526 Accredited by UKAS/Dakks
3. Temperature Calibrator 1206410 000212 Accredited by Dakks, Germany
0 0 0 0
0 0 0 0
The test results are given below and found to conform to the accuracy requirements at the test points.
Acceptable
Input Output Deviation
Error
0 ±1% FSD
25 ±1% FSD
50 ±1% FSD
75 ±1% FSD
100 ±1% FSD
Comments:
1. UUT tested as received.
2. Medium of testing: Air
3. Acceptable error mentioned as per the manufacturer’s specification.
Approved Signatory
Tested by: Ashokan Badi ⃝ Shinod KP
Manager - Calibration
Test Date: 03/08/2023
Recommended
due date: 02/08/2024 ⃝ Ummer Farooque
Asst. Manager - Calibration
End of certificate
This certificate may not be reproduced other than in full, except with the prior written approval of issuing laboratory.
Page 1 of 1
TEST REPORT
Certificate No. : C230708743 Date of issue: 07/08/2023
Job Ref. : SJ230717492 UUT Received on: NA
Customer: Al Zain Farms LLC
Muscat, S. O. Oman
Unit Under Test: Chiller
Manufacturer: Anaum
Model No.: AN 1020
Serial No.: TH-6270-05 Tag No.: Nil
UUT Range: 10% to 90% RH, -10 to +50°C (Indoor),
Tested
-50 toRange:
+70°C(Outdoor
NA
Ref. Procedure: NA
Test Temp. & R.H: NA
Test Location: Al Ansari Calibration Laboratory.
The Unit Under Test (UUT) was tested using the following Laboratory Standard(s) whose accuracies are
traceable to National / International standard(s).
The test results are given below and found to conform to the accuracy requirements at the test points.
Acceptable
Input Output Deviation
Error
0 ±1% FSD
25 ±1% FSD
50 ±1% FSD
75 ±1% FSD
100 ±1% FSD
Comments:
1. UUT tested as received.
2. Medium of testing: Air
3. Acceptable error mentioned as per the manufacturer’s specification.
Page 1 of 1
INITIAL INSPECTION REPORT
Certificate No. : C230708743 Date of issue: 07/08/2023
Job Ref. : SJ230717492 UUT Received on: NA
Customer: Al Zain Farms LLC
Muscat, S. O. Oman
Unit Under Test: Chiller
Manufacturer: Anaum
Model No.: AN 1020
Serial No.: TH-6270-05 Tag No.: Nil
UUT Range: 10% to 90% RH, -10 to +50°C (Indoor),
Calibrated
-50 toRange:
+70°C(Outdoor
NA
Ref. Procedure: NA
Test Temp. & R.H: NA
Test Location: Al Ansari Calibration Laboratory.
The Unit Under Test (UUT) was tested using the following Laboratory Standard(s) whose accuracies are
traceable to National / International standard(s).
The test results are given below and found to conform to the accuracy requirements at the test points.
Acceptable
Input Output Deviation
Error
0 ±1% FSD
25 ±1% FSD
50 ±1% FSD
75 ±1% FSD
100 ±1% FSD
Comments:
1. UUT tested as received.
2. Medium of testing: Air
3. Acceptable error mentioned as per the manufacturer’s specification.
02/08/2024
End of certificate
This certificate may not be reproduced other than in full, except with the prior written approval of issuing laboratory.
Page 1 of 1
COMPLETION CERTIFICATE
Certificate No. : C230708743 Date of issue: 07/08/2023
Job Ref. : SJ230717492 UUT Received on: NA
Customer: Al Zain Farms LLC
Muscat, S. O. Oman
Unit Under Test: Chiller
Manufacturer: Anaum
Model No.: AN 1020
Serial No.: TH-6270-05 Tag No.: Nil
UUT Range: 10% to 90% RH, -10 to +50°C (Indoor),
Calibrated
-50 toRange:
+70°C(Outdoor
NA
Ref. Procedure: As per manufacturer's specification.
Test Temp. & R.H: (22 ± 2)°C & (55 ± 10)%
Test Location: Al Ansari Calibration Laboratory.
The Unit Under Test (UUT) was tested / calibrated using the following Laboratory Standard(s) whose
accuracies are traceable to National / International standard(s).
Tested by: 0
End of certificate
This certificate may not be reproduced other than in full, except with the prior written approval of issuing laboratory.
Page 1 of 1
REJECTION REPORT
Certificate No. : C230708743 Date of issue: 07/08/2023
Job Ref. : UUT Received on: NA
Customer: Al Zain Farms LLC
Test result:
The above mentioned Instrument checked at our Lab and found to be defective and beyond repair at
our works.
End of certificate
This certificate may not be reproduced other than in full, except with the prior written approval of issuing laboratory.
Page 1 of 1