Professional Documents
Culture Documents
Test Procedure
Factory Acceptance Test (FAT) is categorized onto three activities:
1. Visual test
2. Functional Working
3. Performance test
Test Report:
1 The above mentioned Angle Grinding Machine has been visual inspected and found OK.
2 The above mentioned Angle Grinding Machine has been tested as per Factory Acceptance Test (FAT)and found working satisfactory.
3 This is to certify that the Angle Grinding Machine has been certified for service.
Remarks:
1 The above UUT is tested at Site.
2 This report reflects only our verification findling at the time of and under the stated conditions of measurement.
3 Test report shall not be reproduced in part or full unless prior written approval has been given by TCAL.
Approved Signatory
Kali Muthu M
Tested By : B.CHANDRU (Engineer-019) Quality Manager
TCAL-CRT-022 Issue Date:01.07.2018 Rev.0 Page 01 of 01