Professional Documents
Culture Documents
2102-16132
Customer information
Client : Goodyear Dunlop Dudelange Tires Operations S.A.
Contact : Ahmet KOSE
Address : Zone Industrielle Riedgen
3451, Dudelange
Luxembourg
Instrument information
Make : GEFRAN
Type : ME1-6-M-B01M-1-4-D-2130X000X0C
Description : Pressure After
Serial number : 37SI093702
Identification number : 99P00035
Range : 0 .. 1000 bar
Accuracy : 0.5% fs.
Used method
RP/02/KC/S.01 Belac calibration of pressure instruments on site.
Environmental conditions
During this service the following conditions were not exceeded :
Ambient temperature : 23°C ± 5°C
Relative humidity : 45%rh ± 20%rh
Used reference
The equipment used is traceable to National and/or International standards.
R1258 Dead weight tester cert n° 190610499
R1965 Hygro- / Thermometer cert n° 200119422
R4452 Multifunctional calibrator cert n° 200413969
Note
This service was performed at the clients location.
The instrument is measured but not adjusted, so the results are both 'as found' as 'as left'.
Trescal nv | Vosstraat 200 | Berchem (Antwerpen) | Belgium | Telephone + 32 3 542 62 90 | Email: info.benelux@trescal.com
Page 1 to 2
CERTIFICATE OF CALIBRATION
2102-16132
Initial
- Reference Instrument Difference Uncertainty Units
value value ±
1 0,00 0,04 0,04 0,10 bar
2 100,00 99,06 -0,94 0,13 bar
3 200,00 199,74 -0,26 0,20 bar
4 300,00 300,24 0,24 0,28 bar
5 400,0 400,5 0,5 0,4 bar
6 500,0 500,1 0,1 0,4 bar
7 400,0 400,7 0,7 0,4 bar
8 300,00 300,43 0,43 0,28 bar
9 200,00 199,93 -0,07 0,20 bar
10 100,00 99,14 -0,86 0,13 bar
11 0,00 -1,15 -1,15 0,10 bar
The stated uncertainty is that of the entire set-up including the object under test.
The reported uncertainty is based on a standard uncertainty multiplied by a coverage factor k=2, providing a
level of confidence of approximately 95% .
The uncertainty is calculated following EA-4/02 in accordance with the requirements of the ISO/IEC 17025.
Page 2 to 2