Professional Documents
Culture Documents
2102-16060
Customer information
Client : Goodyear Dunlop Dudelange Tires Operations S.A.
Contact : Ahmet KOSE
Address : Zone Industrielle Riedgen
3451, Dudelange
Luxembourg
Instrument information
Make : GOODYEAR
Type : HMI
Description : Pressure Before GP
Serial number : #13L APEX IB Pressure Sensor
Identification number : 13LP10029
Range : 0 .. 1000 bar
Accuracy : 2.5bar.
Used method
P1-02-E.001 Calibration of electrical measurement instruments
Electrical instruments are calibrated with a multifunctional calibrator and/or a digital multimeter.
Environmental conditions
During this service the following conditions were not exceeded :
Ambient temperature : 23°C ± 5°C
Relative humidity : 45%rh ± 20%rh
Used reference
The equipment used is traceable to National and/or International standards.
R1965 Hygro- / Thermometer cert n° 200119422
R4452 Multifunctional calibrator cert n° 200413969
Note
This service was performed at the clients location.
The instrument is measured but not adjusted, so the results are both 'as found' as 'as left'.
Trescal nv | Vosstraat 200 | Berchem (Antwerpen) | Belgium | Telephone + 32 3 542 62 90 | Email: info.benelux@trescal.com
Page 1 to 2
CERTIFICATE OF CALIBRATION
2102-16060
Initial results:
- Range Reference Units Calculated Instrument Difference Uncertainty Units
value value value ±
1 0 tot 1000 bar 4,000 mA 0,0 0,0 0,0 0,4 bar
2 0 tot 1000 bar 8,000 mA 250,0 248,3 -1,7 0,4 bar
3 0 tot 1000 bar 12,000 mA 500,0 498,6 -1,4 0,4 bar
4 0 tot 1000 bar 16,000 mA 750,0 748,3 -1,7 0,4 bar
5 0 tot 1000 bar 20,000 mA 1000,0 998,7 -1,3 0,4 bar
The stated uncertainty is that of the entire set-up including the object under test.
The reported uncertainty is based on a standard uncertainty multiplied by a coverage factor k=2, providing a
level of confidence of approximately 95% .
The uncertainty is calculated following EA-4/02 in accordance with the requirements of the ISO/IEC 17025.
Page 2 to 2