Professional Documents
Culture Documents
Mecon Moritz
Auto Automation limited
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/001/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
Physical inspection
Display Function keys Manifold Terminal ports
OK OK OK OK
Certified by:
Amudi Emeka
QA/QC Engineer
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
Test Data
% APPLIED DIGITLA
OF CALIBRATION PRESSURE OUTPUT
RANGE:2327(mmH2O) (mmH2O) (mA) Deviation Remark
RAISING
0.00 0.00 4.000 0.00 PASS
25.00 581.75 7.992 0.008 PASS
50.00 1163.50 12.000 0.000 PASS
75.00 1745.25 16.000 0.000 PASS
100.00 2327.00 20.000 0.000 PASS
FALLING
Certified by:
Amudi Emeka
QA/QC Engineer
Page 1 of 2
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/002/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
EQUIPMENT: PRESSURE GAUGE SERVICE: CALIBRATION
MANUFACTURER: WIKA METHOD: DIRECT COMPARISION
SERIAL NO: B1630 TRACEABILITY: NIST
RANGE: 0-10 BAR AMBIENT TEMP: 23OC
R/H: 47% R/H
DATE: 22/05/2021
DUE DATE: 21/11/2021
Physical inspection
scale Signal port
OK OK
Test Data
% APPLIED GAUGE
OF CALIBRATION PRESSURE READING
RANGE:10 (BAR) (BAR) (BAR) Deviation Remark
RAISING
0.00 0.00 0.00 0.00 PASS
25.00 2.50 2.50 0.00 PASS
50.00 5.00 5.00 0.00 PASS
75.00 7.50 7.50 0.00 PASS
100.00 10.00 10.00 0.00 PASS
Certified by:
Amudi Emeka
QA/QC Engineer
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/003/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
EQUIPMENT: PRESSURE GAUGE SERVICE: CALIBRATION
MANUFACTURER: WIKA METHOD: DIRECT COMPARISION
SERIAL NO: B1643 TRACEABILITY: NIST
RANGE: 0-10 BAR AMBIENT TEMP: 23OC
R/H: 47% R/H
DATE: 22/05/2021
DUE DATE: 21/11/2021
Physical inspection
scale Signal port
OK OK
Test Data
% APPLIED GAUGE
OF CALIBRATION PRESSURE READING
RANGE:10 (BAR) (BAR) (BAR) Deviation Remark
RAISING
0.00 0.00 0.00 0.00 PASS
25.00 2.50 2.50 0.00 PASS
50.00 5.00 5.00 0.00 PASS
75.00 7.50 7.50 0.00 PASS
100.00 10.00 10.00 0.00 PASS
Certified by:
Amudi Emeka
QA/QC Engineer
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/004/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
EQUIPMENT: PRESSURE GAUGE SERVICE: CALIBRATION
MANUFACTURER: WIKA METHOD: DIRECT COMPARISION
SERIAL NO: B1661 TRACEABILITY: NIST
RANGE: 0-10 BAR AMBIENT TEMP: 23OC
R/H: 47% R/H
DATE: 22/05/2021
DUE DATE: 21/11/2021
Physical inspection
scale Signal port
OK OK
Test Data
% APPLIED GAUGE
OF CALIBRATION PRESSURE READING
RANGE:10 (BAR) (BAR) (BAR) Deviation Remark
RAISING
0.00 0.00 0.00 0.00 PASS
25.00 2.50 2.50 0.00 PASS
50.00 5.00 5.00 0.00 PASS
75.00 7.50 7.50 0.00 PASS
100.00 10.00 10.00 0.00 PASS
Certified by:
Amudi Emeka
QA/QC Engineer
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/005/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
EQUIPMENT: PRESSURE GAUGE SERVICE: CALIBRATION
MANUFACTURER: WIKA METHOD: DIRECT COMPARISION
SERIAL NO: B1683 TRACEABILITY: NIST
RANGE: 0-10 BAR AMBIENT TEMP: 23OC
R/H: 47% R/H
DATE: 22/05/2021
DUE DATE: 21/11/2021
Physical inspection
scale Signal port
OK OK
Test Data
% APPLIED GAUGE
OF CALIBRATION PRESSURE READING
RANGE:10 (BAR) (BAR) (BAR) Deviation Remark
RAISING
0.00 0.00 0.00 0.00 PASS
25.00 2.50 2.50 0.00 PASS
50.00 5.00 5.00 0.00 PASS
75.00 7.50 7.50 0.00 PASS
100.00 10.00 10.00 0.00 PASS
Certified by:
Amudi Emeka
QA/QC Engineer
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/006/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
EQUIPMENT: PRESSURE GAUGE SERVICE: CALIBRATION
MANUFACTURER: WIKA METHOD: DIRECT COMPARISION
SERIAL NO: B1649 TRACEABILITY: NIST
RANGE: 0-10 BAR AMBIENT TEMP: 23OC
R/H: 47% R/H
DATE: 22/05/2021
DUE DATE: 21/11/2021
Physical inspection
scale Signal port
OK OK
Test Data
% APPLIED GAUGE
OF CALIBRATION PRESSURE READING
RANGE:10 (BAR) (BAR) (BAR) Deviation Remark
RAISING
0.00 0.00 0.00 0.00 PASS
25.00 2.50 2.50 0.00 PASS
50.00 5.00 5.00 0.00 PASS
75.00 7.50 7.50 0.00 PASS
100.00 10.00 10.00 0.00 PASS
Certified by:
Amudi Emeka
QA/QC Engineer
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/007/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
EQUIPMENT: PRESSURE GAUGE SERVICE: CALIBRATION
MANUFACTURER: WIKA METHOD: DIRECT COMPARISION
SERIAL NO: B1638 TRACEABILITY: NIST
RANGE: 0-10 BAR AMBIENT TEMP: 23OC
R/H: 47% R/H
DATE: 22/05/2021
DUE DATE: 21/11/2021
Physical inspection
scale Signal port
OK OK
Test Data
% APPLIED GAUGE
OF CALIBRATION PRESSURE READING
RANGE:10 (BAR) (BAR) (BAR) Deviation Remark
RAISING
0.00 0.00 0.00 0.00 PASS
25.00 2.50 2.50 0.00 PASS
50.00 5.00 5.00 0.00 PASS
75.00 7.50 7.50 0.00 PASS
100.00 10.00 10.00 0.00 PASS
Certified by:
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
Amudi Emeka
QA/QC Engineer
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/008/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
EQUIPMENT: PRESSURE GAUGE SERVICE: CALIBRATION
MANUFACTURER: WIKA METHOD: DIRECT COMPARISION
SERIAL NO: B1624 TRACEABILITY: NIST
RANGE: 0-10 BAR AMBIENT TEMP: 23OC
R/H: 47% R/H
DATE: 22/05/2021
DUE DATE: 21/11/2021
Physical inspection
scale Signal port
OK OK
Test Data
% APPLIED GAUGE
OF CALIBRATION PRESSURE READING
RANGE:10 (BAR) (BAR) (BAR) Deviation Remark
RAISING
0.00 0.00 0.00 0.00 PASS
25.00 2.50 2.50 0.00 PASS
50.00 5.00 5.00 0.00 PASS
75.00 7.50 7.50 0.00 PASS
100.00 10.00 10.00 0.00 PASS
Amudi Emeka
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
QA/QC Engineer
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/009/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
EQUIPMENT: PRESSURE GAUGE SERVICE: CALIBRATION
MANUFACTURER: WIKA METHOD: DIRECT COMPARISION
SERIAL NO: B1652 TRACEABILITY: NIST
RANGE: 0-10 BAR AMBIENT TEMP: 23OC
R/H: 47% R/H
DATE: 22/05/2021
DUE DATE: 21/11/2021
Physical inspection
scale Signal port
OK OK
Test Data
% APPLIED GAUGE
OF CALIBRATION PRESSURE READING
RANGE:10 (BAR) (BAR) (BAR) Deviation Remark
RAISING
0.00 0.00 0.00 0.00 PASS
25.00 2.50 2.50 0.00 PASS
50.00 5.00 5.00 0.00 PASS
75.00 7.50 7.50 0.00 PASS
100.00 10.00 10.00 0.00 PASS
Amudi Emeka
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
QA/QC Engineer
CALIBRATION CERTIFICATE
Client: WIRE-TEKS INT’/ COMPANY IMITED Certificate no: MMAL/WIRE-TEKS/010/2021
MECON MORITZ AUTOMATION LIMITED certifies that the below listed instrument has been tested for conformity to all
specifications as published (unless otherwise noted). It has been tested using measurement standards traceable to the National
Institute of Standard and Technology (NIST) accepted intrinsic standards of measurement, or derived by the ratio type of self-
calibration techniques. This calibration complies with ISO/IEC 17025:2015(E)-This calibration respects the Nigerian Industries
Standard (NIS) of “Standard Organization of Nigeria (SON)” and “DPR”
This report may only be reproduced with written approval of the calibration laboratory.
EQUIPMENT: PRESSURE GAUGE SERVICE: CALIBRATION
MANUFACTURER: WIKA METHOD: DIRECT COMPARISION
SERIAL NO: B1623 TRACEABILITY: NIST
RANGE: 0-10 BAR AMBIENT TEMP: 23OC
R/H: 47% R/H
DATE: 22/05/2021
DUE DATE: 21/11/2021
Physical inspection
scale Signal port
OK OK
Test Data
% APPLIED GAUGE
OF CALIBRATION PRESSURE READING
RANGE:10 (BAR) (BAR) (BAR) Deviation Remark
RAISING
0.00 0.00 0.00 0.00 PASS
25.00 2.50 2.50 0.00 PASS
50.00 5.00 5.00 0.00 PASS
75.00 7.50 7.50 0.00 PASS
100.00 10.00 10.00 0.00 PASS
Certified by:
Amudi Emeka
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website:
RC: 1603038
Mecon Moritz
Auto Automation limited
QA/QC Engineer
____________________________________________________________________________________________________________________
ADDRESS:1 DIKE CLOSE APA MOTOR/MOUNT OLIVE ROAD ODANI ELELENWO PORT HARCOURT OBI AKPOR L.G.A RIVERS STATE NIGERIA
PHONE: +234 (0)7061838590 EMAIL: eamudi@gmail.com website: