Professional Documents
Culture Documents
THEORY
AC converter is a kind of static converter that converts an AC to another AC level without changing
the frequency. AC converters are widely used to control average load voltage from a fixed ac source.
Application areas of actoac converters are industrial heating, light dimming, AC motor speed control.
There are two ways to operate these converters: 1.on-off control & phase angle control. They are
classified in terms of circuit topology as single phase controllers & three phase controllers. Each
circuit topology could be operate as unidirectional (haf_wave) controller and bidirectional
(full_wave) controller.
Simulation
Parameters
Resistance = 1
1
BAHCESEHIR UNIVERSITY
POWER ELECTRONIC LABORATORY
Homework
Now, it is your turn, create a single phase actoac converter with balanced RL loads.
Show your works (do not forget to show parameters you entered) and results.
Resistance = 5 ohm
Inductance = 47 10^-3 F