Professional Documents
Culture Documents
GEOMATIC ENGINEERING
SEMESTER 1, 2023/2024
TUTORIAL LEVELLING
Table Q1
a. Prepare booking method using Height of Collimation and Rise and Fall Methods.
b. Do a note check.
2. All the data is Figure Q2 is presented in meter unit. Refer to this figure, answer questions below:
Figure Q2
b. Do a note check.
d. If the survey relies on Third Class survey, determine whether this survey is acceptable
or not. Given, total length of survey is 850 m.
Figure Q3
b. The allowable misclosure for this survey must be lies within 2nd class survey. If total
distance for this survey is 460.35 m, justify your answer.
a. Complete the set of leveling notes in Table Q4(a) and perform the arithmetic check.
Table Q4(a)
Station BS (m) HI (m) FS (m) Elevation (m)
BM 100 2.71 355.23
TP1 3.62 4.88
TP2 3.51 3.97
TP3 3.17 2.81
TP4 1.47 1.62
BM 100 1.21
b. If the loop distance is 304.8 m, at what order of survey do the results qualify?
c. Distance between station is listed in Table Q4(b). Assess the adjusted reduced level of
TP stations.
Table Q4(b)
Station Distance
BM 100 – TP 1 76.3
TP1 – TP2 52.8
TP2 – TP3 36.7
TP3 – TP4 68.4
TP4 – BM 100 70.6