Professional Documents
Culture Documents
the second is
the finishing process
double thicknees
charnwood
disk planer
double
drilling assembly
disk
The workers gets the row material and start by cutting the material to the desired length of the work
piece. In this step the length is larger than the finished product length.
Charnwood machine:
The workpiece go into the Charnwood machine that is used to clean the surface of the workpiece.
The workpieces thickness is not constant in all workpieces. so the worker insert the workpiece in the
thickness planer machine to decrease the thickness of the piece and to smooth the surface.
Double disk:
In this step the worker cut the length of the workpiece to the finish length that uses in the product.
Assembly:
In the assembly process the workers put the door inner frame together by nailing.
Drilling:
In this stage the door main frame are done and the worker drill main parts in the door for the future
assembly.
Secondly, the finishing stage.
glue yorya
CNC hot press
with the shell
Cold press:
The door start with a cold press to put the cover of the frame.
Double ends:
The worker put the door in to a machine that glue a shell to the ends of the door frame.
Sanding:
The worker sand the ends of the door frame to ensure that the frame and the glued shell are leveled.
The worker spread the yorya glue on the door frame then put the outer shell on the glue.
Hot press:
To cure the residue on the door frame from the last stage.
CNC:
The worker insert the door in the CNC machine that start by removing the remaining glue form the door.
Then it start to curve the location of the door hinge, Knobs/Handles and Locksets.