You are on page 1of 22

PHATECO TECHNICAL SERVICES JOINT STOCK COMPANY

NON DESTRUCTIVE TESTING REPORT

SHIP'S NAME:

M/V "HAI DUONG 108"


REPORT No. : PTCS.NDT.23.026
IMO No. : 9563378
Hrr--ffi
Head office: No. 5A/613 Thien Loi Road, Vinh Niem ward, Le Chan district, Hai Phong City, Vietnam.
www.phateco.com email: admin@phateco.com Tel: (+84) 2253 874 870 Fax: (+841 2253 559 448
R FI IENC
CERTIFICATE NO: PTC.NDT.0477
d@
This is to certify that:
trE
,w

&8
ag.

\d,
i,;
PHAM VAN TRUNG
$Bi
Date of birth 16.07.1989 &-**6
@
i.er
-+H ii

ffiw'
f '*u
Has demonstrated satisfactory requirements of qualification and/or ,E
continuous evaluation of technical performance in accordance with
PHATECO's written practice number PTC.TDD.NDT.P01 which is
Mf
r*
based on Recommended Practice No. SNT-TC-1A of American #
Society for Nondestructive Testing in the following Nondestructive
@
M
Testing Method:

Method Level lssuance Expiry


*&* ,$

.*#
I 05t2020
Magn etic Pafti cle Testi ng
Li qui d Pen etrant Testi ng il 4512020
05t2025
0512025 W
i.,

Ultrasonic Testing lt a5t2o20 0512025

ffi-
qf5d
\, ,rSS.
t
'
&e*-
""t-teeq_

ASNT NDT LEVEL III


(Cert No: 172351) c+rye> ffi
@ -."-

NGUYEN DUC DUNG


M
$E[
$&h
H *de* a@E
DATE: 11th May, 2020 GENERAL DIRECTOR %..

This certificate is the properly of PHATECO and to be revoked when the candidate's employment is terminated
Chring chi nay td tdi idn cua PHATECO vd sd kh6ng cdn gid tri khi chiim dr.rt ho. p ding lao dQng
Form No: PTC.TDD.NDT.P0 l.F0 I Issued date: 12.07.2016 Rev.: 5
PHATECO TECHNICAL SERVICES JOINT STOCK COMPANY

CONTENT OF REPORT

No. ITEM LIST PAGE


1 LIQUID PENETRANT EXMINATION REPORT

2 MAGNETIC PARTICLE EXAMINATION REPORT


M/V "HAI DUONG 108"

PART 1

LIQUID PENETRANT EXMINATION REPORT


Report No. : PTCS.PT.23.026/01
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 1 of 4

CLIENT : HADUCO CODE/ STANDARD : ABS Rules


PROJECT : M/V " HAI DUONG 108 " ACCEPTANCE CRITERIA : ABS Part 7/Appendix 1/Sec.10/Table 1
LOCATION : VISAL SHIPYARD NDT EXTENT : AS SHOW IN ATTACHED PICTURE(S)
ITEM : PROPELLER PORT & STB'D & BOW PROCEDURE : PTC.NDT.P04.REV.5
MATERIAL : Bronze alloy PRODUCT TYPE : CASTING
SKETCH : SEE ATTACHED SKETCH PROCESS : N/A
Prepared edge After Welding After PWHT
State of Examination
Base Metal After Repair In-service
Type of joint Butt joint Tee-joint Corner-joint Lap-joint
Surface Condition Flush Grinding As weld
Surface Cleaning Sligtly grinding Brushing Using cleaner Other
Surface Temperature Ambient: 10 ~ 50 0C Ambient: 5 ~ 10 0C
Lighting Condition ` Day light > 1000 lux Artificial > 1000 lux Black Light
Lighting Meter : N/A Serial : N/A Next Cal. Due : N/A
Penetrant apply method Spraying Dipping Brushing
PT MATERIAL MANUFACTURE BRAND NAME BATCH NO. TYPE DWELL TIME
Penetrant NABAKEM MEGA CHECK - MCP-2010 AGAJAGG Colour contrast 15 min
Remover NABAKEM MEGA CHECK - MCC-1010 AIAACJ1A Solvent 1 min
Developer NABAKEM MEGA CHECK - MCD-3010 BJJGBIF Wet Solvent base 15 ~ 25 min

EXAMINATION RESULTS
THICK WELDED INDICATION EVALUATION
INSP. INSPECTED
ITEM -NESS LENGTH REMARKS
(pcs) SIZE LOCATION DATE
(mm) (m) No Type ACC REJ
(mm) (mm)
NO.1 1 √ 14-Jul-23 Not found Defect

PROPELLER NO.2 1 √ 14-Jul-23 Not found Defect


AFT-PORT NO.3 1 √ 14-Jul-23 Not found Defect
NO.4 1 √ 14-Jul-23 Not found Defect
NO.5 1 √ 14-Jul-23 Not found Defect

PROPELLER NO.6 1 √ 14-Jul-23 Not found Defect


AFT-STB'D NO.7 1 √ 14-Jul-23 Not found Defect
NO.8 1 √ 14-Jul-23 Not found Defect
NO.1 1 √ 14-Jul-23 Not found Defect

PROPELLER NO.2 1 √ 14-Jul-23 Not found Defect


BOW NO.3 1 √ 14-Jul-23 Not found Defect
NO.4 1 √ 14-Jul-23 Not found Defect

TOTAL INSPECTED : 12 pcs


Legend: ACC: Accepted CR: Crack UC: Undercut LOF: Lack of fusion SI: Slag inclusion

REJ: Rejected P: Pore/ Porosity OV: Overlap LOP: Lack of penetration

PHATECO SHIP OWNER CLASS REGISTER


ASNT-TC-1A PT LEVEL 2

PHAM VAN TRUNG


Name & dated signature Name & dated signature Name & dated signature
Report No. : PTCS.PT.23.026/01
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 2 of 4

PROPELLER AFT- PORT


PROPELLER

AAA
NO.1 NO.2 NO.3 NO.4

PROPELLER AFT- STB'D

NO.5 NO.6 NO.7 NO.8

PROPELLER - BOW

NO.1 NO.2 NO.3 NO.4


Report No. : PTCS.PT.23.026/02
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 3 of 4

CLIENT : HADUCO CODE/ STANDARD : ABS Rules


PROJECT : M/V " HAI DUONG 108 " ACCEPTANCE CRITERIA : Part 2/Appendix 7/Sec.2/Fig.11.3
LOCATION : VISAL SHIPYARD NDT EXTENT : AS SHOW IN ATTACHED PICTURE(S)
ITEM : BOLTS OF PROPELLER & TAIL SHAFT PROCEDURE : PTC.NDT.P04.REV.5
MATERIAL : C-S PRODUCT TYPE : FORGING
SKETCH : SEE ATTACHED SKETCH PROCESS : N/A
Prepared edge After Welding After PWHT
State of Examination
Base Metal After Repair In-service
Type of joint Butt joint Tee-joint Corner-joint Lap-joint
Surface Condition Flush Grinding As weld
Surface Cleaning Sligtly grinding Brushing Using cleaner Other
Surface Temperature Ambient: 10 ~ 50 0C Ambient: 5 ~ 10 0C
Lighting Condition ` Day light > 1000 lux Artificial > 1000 lux Black Light
Lighting Meter : N/A Serial : N/A Next Cal. Due : N/A
Penetrant apply method Spraying Dipping Brushing
PT MATERIAL MANUFACTURE BRAND NAME BATCH NO. TYPE DWELL TIME
Penetrant NABAKEM MEGA CHECK - MCP-2010 AGAJAGG Colour contrast 15 min
Remover NABAKEM MEGA CHECK - MCC-1010 AIAACJ1A Solvent 1 min
Developer NABAKEM MEGA CHECK - MCD-3010 BJJGBIF Wet Solvent base 15 ~ 25 min

EXAMINATION RESULTS
THICK WELDED INDICATION EVALUATION
INSP. INSPECTED
ITEM -NESS LENGTH REMARKS
(pcs) SIZE LOCATION DATE
(mm) (m) No Type ACC REJ
(mm) (mm)
PROPELLER - PORT
NO.1~NO.24 24 √ 14-Jul-23 Not found Defect

PROPELLER - STB'D
NO.1~NO.24 24 √ 14-Jul-23 Not found Defect
PROPELLER-BOW
NO.1~NO.24 32 √ 14-Jul-23 Not found Defect
TAIL SHAFT
NO.1~NO.32 32 √ 14-Jul-23 Not found Defect

TOTAL INSPECTED : 112 pcs


Legend: ACC: Accepted CR: Crack UC: Undercut LOF: Lack of fusion SI: Slag inclusion

REJ: Rejected P: Pore/ Porosity OV: Overlap LOP: Lack of penetration

PHATECO SHIP OWNER CLASS REGISTER


ASNT-TC-1A PT LEVEL 2

PHAM VAN TRUNG


Name & dated signature Name & dated signature Name & dated signature
Report No. : PTCS.PT.23.026/02
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 4 of 4

BOLTS OF PROPELLER - PORT BOLTS OF PROPELLER - STB'D

AAA

BOLTS OF PROPELLER - BOW BOLTS OF TAIL SHAFT


Report No. : PTCS.PT.23.026/03
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 1 of 3

CLIENT : HADUCO CODE/ STANDARD : ABS Rules


PROJECT : M/V " HAI DUONG 108 " ACCEPTANCE CRITERIA : Part 2/Appendix 6/Sec.2/Fig.11.3
LOCATION : VISAL SHIPYARD NDT EXTENT : AS SHOW IN ATTACHED PICTURE(S)
ITEM : MAIN ENGINE PROCEDURE : PTC.NDT.P04.REV.5
MATERIAL : C-S PRODUCT TYPE : CASTING
SKETCH : SEE ATTACHED SKETCH PROCESS : N/A
Prepared edge After Welding After PWHT
State of Examination
Base Metal After Repair In-service
Type of joint Butt joint Tee-joint Corner-joint Lap-joint
Surface Condition Flush Grinding As weld
Surface Cleaning Sligtly grinding Brushing Using cleaner Other
Surface Temperature Ambient: 10 ~ 50 0C Ambient: 5 ~ 10 0C
Lighting Condition ` Day light > 1000 lux Artificial > 1000 lux Black Light
Lighting Meter : N/A Serial : N/A Next Cal. Due : N/A
Penetrant apply method Spraying Dipping Brushing
PT MATERIAL MANUFACTURE BRAND NAME BATCH NO. TYPE DWELL TIME
Penetrant NABAKEM MEGA CHECK - MCP-2010 AGAJAGG Colour contrast 15 min
Remover NABAKEM MEGA CHECK - MCC-1010 AIAACJ1A Solvent 1 min
Developer NABAKEM MEGA CHECK - MCD-3010 BJJGBIF Wet Solvent base 15 ~ 25 min

EXAMINATION RESULTS
THICK WELDED INDICATION EVALUATION
INSP. INSPECTED
ITEM -NESS LENGTH REMARKS
(pcs) SIZE LOCATION DATE
(mm) (m) No Type ACC REJ
(mm) (mm)
MAIN ENGINE - PORT
PISTON HEAD 16 √ 14-Jul-23 Not found defect
CYLINDER COVER 16 √ 14-Jul-23 Not found defect
CYLINDER LINE 16 √ 14-Jul-23 Not found defect
CONNECTING ROD 16 √ 14-Jul-23 Not found defect
MAIN ENGINE - STB'D
PISTON HEAD 16 √ 14-Jul-23 Not found defect
CYLINDER COVER 16 √ 14-Jul-23 Not found defect
CYLINDER LINE 16 √ 14-Jul-23 Not found defect
CONNECTING ROD 16 √ 14-Jul-23 Not found defect

TOTAL INSPECTED : 56 pcs


Legend: ACC: Accepted CR: Crack UC: Undercut LOF: Lack of fusion SI: Slag inclusion

REJ: Rejected P: Pore/ Porosity OV: Overlap LOP: Lack of penetration

PHATECO SHIP OWNER CLASS REGISTER


ASNT-TC-1A PT LEVEL 2

PHAM VAN TRUNG


Name & dated signature Name & dated signature Name & dated signature
Report No. : PTCS.PT.23.026/03
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 2 of 3

PISTON HEAD PORT & STB'D

AAA

CYLINDER COVER PORT & STB'D


Report No. : PTCS.PT.23.026/03
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 3 of 3

CYLINDER LINE PORT & STB'D

AAA

CONNECTING ROD PORT & STB'D


Report No. : PTCS.PT.23.026/04
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 1 of 3

CLIENT : HADUCO CODE/ STANDARD : ABS Rules


PROJECT : M/V " HAI DUONG 108 " ACCEPTANCE CRITERIA : Part 2/Appendix 6/Sec.2/Fig.11.3
LOCATION : VISAL SHIPYARD NDT EXTENT : AS SHOW IN ATTACHED PICTURE(S)
ITEM : GENNERATOR ENGINE PROCEDURE : PTC.NDT.P04.REV.5
MATERIAL : C-S PRODUCT TYPE : CASTING
SKETCH : SEE ATTACHED SKETCH PROCESS : N/A
Prepared edge After Welding After PWHT
State of Examination
Base Metal After Repair In-service
Type of joint Butt joint Tee-joint Corner-joint Lap-joint
Surface Condition Flush Grinding As weld
Surface Cleaning Sligtly grinding Brushing Using cleaner Other
Surface Temperature Ambient: 10 ~ 50 0C Ambient: 5 ~ 10 0C
Lighting Condition ` Day light > 1000 lux Artificial > 1000 lux Black Light
Lighting Meter : N/A Serial : N/A Next Cal. Due : N/A
Penetrant apply method Spraying Dipping Brushing
PT MATERIAL MANUFACTURE BRAND NAME BATCH NO. TYPE DWELL TIME
Penetrant NABAKEM MEGA CHECK - MCP-2010 AGAJAGG Colour contrast 15 min
Remover NABAKEM MEGA CHECK - MCC-1010 AIAACJ1A Solvent 1 min
Developer NABAKEM MEGA CHECK - MCD-3010 BJJGBIF Wet Solvent base 15 ~ 25 min

EXAMINATION RESULTS
THICK WELDED INDICATION EVALUATION
INSP. INSPECTED
ITEM -NESS LENGTH REMARKS
(pcs) SIZE LOCATION DATE
(mm) (m) No Type ACC REJ
(mm) (mm)
GENNERATOR ENGINE NO.1

PISTON HEAD 6 √ 14-Jul-23 Not found Defect


CYLINDER COVER 1 √ 14-Jul-23 Not found Defect
CYLINDER LINE 6 √ 14-Jul-23 Not found Defect
CONNECTING ROD 6 √ 14-Jul-23 Not found Defect
GENNERATOR ENGINE NO.2

PISTON HEAD 6 √ 14-Jul-23 Not found Defect


CYLINDER COVER 1 √ 14-Jul-23 Not found Defect
CYLINDER LINE 6 √ 14-Jul-23 Not found Defect
CONNECTING ROD 6 √ 14-Jul-23 Not found Defect
GENNERATOR ENGINE NO.3

PISTON HEAD 6 √ 14-Jul-23 Not found Defect


CYLINDER COVER 1 √ 14-Jul-23 Not found Defect
CYLINDER LINE 6 √ 14-Jul-23 Not found Defect
CONNECTING ROD 6 √ 14-Jul-23 Not found Defect

TOTAL INSPECTED : 57 pcs


Legend: ACC: Accepted CR: Crack UC: Undercut LOF: Lack of fusion SI: Slag inclusion

REJ: Rejected P: Pore/ Porosity OV: Overlap LOP: Lack of penetration

PHATECO SHIP OWNER CLASS REGISTER


ASNT-TC-1A PT LEVEL 2

PHAM VAN TRUNG


Name & dated signature Name & dated signature Name & dated signature
Report No. : PTCS.PT.23.026/04
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 2 of 3

PISTON HEAD NO.1,NO.2,NO.3

AAA

CYLINDER COVER NO.1,NO.2,NO.3


Report No. : PTCS.PT.23.026/04
LIQUID PENETRANT Date : 17-07-2023
EXAMINATION REPORT Page : 3 of 3

CYLINDER LINE NO.1,NO.2,NO.3

AAA

CONNECTING ROD NO.1,NO.2,NO.3


M/V "HAI DUONG 108"

PART 2

MAGNETIC PARTICLE EXAMINATION REPORT


Report No. : PTCS.MT.23.026/01
MAGNETIC PARTICLE Date : 17-07-2023
EXAMINATION REPORT Page : 1 of 6
CLIENT : HADUCO CODE or STANDARD : ABS Rules
PROJECT : M/V " HAI DUONG 108 " ACCEPTANCE CRITERIA : ABS/Part 2/Appendix 7/Sec.2/Fig.11.3
LOCATION : VISAL SHIPYARD NDT EXTENT : AS SHOW IN ATTACHED PICTURE(S)
ITEM : TAIL SHAFT - PORT&STB'D PROCEDURE : PTC.NDT.P03.REV.5
MATERIAL : C-S PRODUCT TYPE : FORGING
SKETCH : SEE ATTACHED SKETCH PROCESS : N/A
Equipment Used MY-2 Serial NW8656 Next Cal. Due 20/02/2024
Examination Method Continuous Residual
Magnetizing Method Permanent Yoke Yoke Prod
Current/Lifting Power AC DC Lifting power (Min. 4.5 kg)
Magnetic Particle (Brand) : NABAKEM SM-15(ADABBBG) Contrast paint (Brand) : NABAKEM MP-35(AEJAJGF)

Medium Dry Wet Fluorescent Visible Contrast


Prepared edge After Welding After PWHT
State of Examination
Base Metal After Repair In-service
Surface Condition Grinding Brushing As weld Other : As machining
Surface Temperature Ambient < 52 0C
Lighting Condition Day light > 1000 lux Artificial > 1000 lux Black Light
Lighting Meter N/A Serial : -- Next Cal. Due : --
Yoke Distance : max 150mm
Examination sequences Two Perpendicular direction One Direction Other
Demagnetization Yes No Post Cleaning Yes No
EXAMINATION RESULTS
THICk- WELDED INSP. INDICATION EVALUATION DATE OF
WELD IDENTIFICATION NESS LENGTH LENGTH LOCATION
REMARKS
(pcs) No TYPE ACC. REJ. INSPECTION
(mm) (mm) (mm) (mm)
TAIL SHAFT - PORT 1 √ 15-Jul-23 Not found defect

TAIL SHAFT - STB'D 1 √ 15-Jul-23 Not found defect

TOTAL INSPECTED LENGTH:


Legend: ACC: Accepted CR: Crack UC: Undercut LOF: Lack of fusion SI: Slag inclusion

REJ: Rejected P: Pore/ Porosity OV: Overlap LOP: Lack of penetration L: Linear indication

PHATECO SHIP OWNER CLASS REGISTER


MT LEVEL 2

PHAM VAN TRUNG


Name & dated signature Name & dated signature Name & dated signature
Report No. : PTCS.MT.23.026/01
MAGNETIC PARTICLE Date : 17-07-2023
EXAMINATION REPORT Page : 2 of 6

TAIL SHAFT - PORT


Position.1 Position.2

Position.3

TAIL SHAFT - STB'D


Position.1 Position.2

Position.3
Report No. : PTCS.MT.23.026/02
MAGNETIC PARTICLE Date : 17-07-2023
EXAMINATION REPORT Page : 3 of 6
CLIENT : HADUCO CODE or STANDARD : ABS Rules
PROJECT : M/V " HAI DUONG 108 " ACCEPTANCE CRITERIA : ABS/Part 2/Appendix 7/Sec.2/Fig.11.3
LOCATION : VISAL SHIPYARD NDT EXTENT : AS SHOW IN ATTACHED PICTURE(S)
ITEM : RUDDER SHAFT - PORT&STB'D PROCEDURE : PTC.NDT.P03.REV.5
MATERIAL : C-S PRODUCT TYPE : FORGING
SKETCH : SEE ATTACHED SKETCH PROCESS : N/A
Equipment Used MY-2 Serial NW8656 Next Cal. Due 20/02/2024
Examination Method Continuous Residual
Magnetizing Method Permanent Yoke Yoke Prod
Current/Lifting Power AC DC Lifting power (Min. 4.5 kg)
Magnetic Particle (Brand) : NABAKEM SM-15(ADABBBG) Contrast paint (Brand) : NABAKEM MP-35(AEJAJGF)

Medium Dry Wet Fluorescent Visible Contrast


Prepared edge After Welding After PWHT
State of Examination
Base Metal After Repair In-service
Surface Condition Grinding Brushing As weld Other : As machining
Surface Temperature Ambient < 52 0C
Lighting Condition Day light > 1000 lux Artificial > 1000 lux Black Light
Lighting Meter N/A Serial : -- Next Cal. Due : --
Yoke Distance : max 150mm
Examination sequences Two Perpendicular direction One Direction Other
Demagnetization Yes No Post Cleaning Yes No
EXAMINATION RESULTS
THICk- WELDED INSP. INDICATION EVALUATION DATE OF
WELD IDENTIFICATION NESS LENGTH LENGTH LOCATION
REMARKS
(pcs) No TYPE ACC. REJ. INSPECTION
(mm) (mm) (mm) (mm)
RUDDER SHAFT - PORT 1 √ 15-Jul-23 Not found defect

RUDDER SHAFT - STB'D 1 √ 15-Jul-23 Not found defect

TOTAL INSPECTED LENGTH:


Legend: ACC: Accepted CR: Crack UC: Undercut LOF: Lack of fusion SI: Slag inclusion

REJ: Rejected P: Pore/ Porosity OV: Overlap LOP: Lack of penetration L: Linear indication

PHATECO SHIP OWNER CLASS REGISTER


MT LEVEL 2

PHAM VAN TRUNG


Name & dated signature Name & dated signature Name & dated signature
Report No. : PTCS.MT.23.026/02
MAGNETIC PARTICLE Date : 17-07-2023
EXAMINATION REPORT Page : 4 of 6

RUDDER SHAFT - PORT RUDDER SHAFT - STB'D


Report No. : PTCS.MT.23.026/03
MAGNETIC PARTICLE Date : 23-07-2023
EXAMINATION REPORT Page : 5 of 6
CLIENT : HADUCO CODE or STANDARD : ABS Rules
PROJECT : M/V " HAI DUONG 108 " ACCEPTANCE CRITERIA : ABS NDI 2018/Sec.10/Fig.5.5
LOCATION : VISAL SHIPYARD NDT EXTENT : AS SHOW IN ATTACHED PICTURE(S)
ITEM : AFTER PEAK - PORT PROCEDURE : PTC.NDT.P03.REV.5
MATERIAL : C-S PRODUCT TYPE : Welding
SKETCH : SEE ATTACHED SKETCH PROCESS : SMAW
Equipment Used MY-2 Serial NW8656 Next Cal. Due 20/02/2024
Examination Method Continuous Residual
Magnetizing Method Permanent Yoke Yoke Prod
Current/Lifting Power AC DC Lifting power (Min. 4.5 kg)
Magnetic Particle (Brand) : NABAKEM SM-15(ADABBBG) Contrast paint (Brand) : NABAKEM MP-35(AEJAJGF)

Medium Dry Wet Fluorescent Visible Contrast


Prepared edge After Welding After PWHT
State of Examination
Base Metal After Repair In-service
Surface Condition Grinding Brushing As weld Other : As machining
Surface Temperature Ambient < 52 0C
Lighting Condition Day light > 1000 lux Artificial > 1000 lux Black Light
Lighting Meter N/A Serial : -- Next Cal. Due : --
Yoke Distance : max 150mm
Examination sequences Two Perpendicular direction One Direction Other
Demagnetization Yes No Post Cleaning Yes No
EXAMINATION RESULTS
THICk- WELDED INSP. INDICATION EVALUATION DATE OF
WELD IDENTIFICATION NESS LENGTH LENGTH LOCATION
REMARKS
(pcs) No TYPE ACC. REJ. INSPECTION
(mm) (mm) (mm) (mm)
Bracket of Frame -5 1600 √ 22-Jul-23 Not found defect

Web plate of Frame -2 4400 √ 22-Jul-23 Not found defect

Web plate of Frame -1 2800 √ 22-Jul-23 Not found defect

Web plate of Frame 0 2800 √ 22-Jul-23 Not found defect

Bottom girder of Aft end 2000 √ 22-Jul-23 Not found defect

TOTAL INSPECTED LENGTH:


Legend: ACC: Accepted CR: Crack UC: Undercut LOF: Lack of fusion SI: Slag inclusion

REJ: Rejected P: Pore/ Porosity OV: Overlap LOP: Lack of penetration L: Linear indication

PHATECO SHIP OWNER CLASS REGISTER


MT LEVEL 2

PHAM VAN TRUNG


Name & dated signature Name & dated signature Name & dated signature
Report No. : PTCS.MT.23.026/03
MAGNETIC PARTICLE Date : 23-07-2023
EXAMINATION REPORT Page : 6 of 6

Bracket of Frame -5 Web plate of Frame -2

Web plate of Frame -1 Web plate of Frame 0

Bottom girder of Aft end

You might also like