Professional Documents
Culture Documents
P1808-F02-VCE-HVA-MTS-0017-R03 HEPA Side Entry
P1808-F02-VCE-HVA-MTS-0017-R03 HEPA Side Entry
AstroCel® TM-III
Typical Application AstroCel® TM Series ducted modules are lightweight, disposable HEPA filter ceiling
modules. The modules are designed for optimum filter performance in cleanrooms with
individually ducted modules. It have an adjustable distribution plate (an optional design
with a fixed perforated distribution plate is also available) and each unit is entirely factory-
sealed, so there are no leak paths between the filter inlet and air leaving side. The modules
also suitable for gasketed and gel grid systems.
www.aafintl.com
Project: 1808 - DRUG PRODUCT BUILDING
Package No. : F02-VCE-HVA-MTS
The following items are hereby submitted for review. We also certify that the items submitted are in full compliance with the Contract documents. (NB: Any
deviations are to be submitted seperately under a request for Deviation).
Company Name Responsible Person Date In Sign Date Out Sign Approval Time
VC Engineering Lee Khoon Seng NA NA 05-Jan-2023 kslee NA
Review Comments:
kslee
Signature (Contractor) Signature (WKL) Signature (Client)
PM FM CM OTHERS
6 5 4 3 2 1
REVISION HISTORY
158 REV DESCRIPTION DATE NAME
55 104 55 01 Update insulation area and add plenum box height dimension 15/12/2022 Khairul
97
02 Change dimension plenum and collar 19/12/2022 Khairul
D D
FRONT BACK
157
10 12
11
55
114
C PLAN VIEW C
560
538 500
30 500 Rivet
8 7
5 4
6
3 11mm width Neoprene Gasket
220 160
300
300.00
2
175
B B
9
610 (+0,-2) 610 (+0,-2) 11mm
Note: 1
1. AirFlow : 1407 CMH @1.05m/s
ISOMETRIC VIEW
FRONT VIEW SIDE VIEW 2. FPD : 500 Pa
No. Part Material No. Part Material Dimension Actual Size (mm)
Pleated Media Glass fibre (H14) 7 Sealant Polyurethane (PU) Height 610
1
Eff: 99.995% @ MPPS
Width 610
Hot Melt Seperators Thermoplastic Wedge Aluminium Extrusion
2 8 175
Depth -
Casing Aluminium Extrusion Faceguard Galvanised Steel with Please chop and sign upon confirmation, manufacturing
3 9
(Air Leaving Side) White Epoxy Coating - will not commence until we receive signed off drawings.
Gasket Food Grade Gasket Pressure Fitting x 2 SS Fitting c/w Plastic Cap Scale Drawn by Checked by Approved by Date
4 10 Part no: 14/12/2022
(Air Leaving Side) (11mm width) 12mm NTS Akhishah Si Hui Sie Kee
A SHEET Thrid Angle
TM-III H14 c/w Flange with 6mm Insulation A
SIZE Projection
TM Top Aluminium Flange Aluminium 2 pcs SS Pressure Fitting
5 11 GENERAL TOLERANCE
(1.2mm Thickness) (2 mm Thickness) A4
OF THIS FILTER
IS +0,-2 AAF Manufacturing Sdn. Bhd. 610 x 610 x 175mm
Corner Hanger Aluminium Plenum Box Aluminium Shah Alam Dimension in DWG NO: Rev Sheet
6 12 MALAYSIA
(1.2 mm Thickness) www.aafasia.com mm [in] DS-C-01-316-R02 02 1/1
6 5 4 3 2 1
Test Report. No. INDIA1413012418 Date: 10 NOV 2018 Page 1 of 3
The following sample(s) was/were submitted and identified on behalf of the clients as : Food Grade Silicone sponge
Tape.
SGS Job No. : No. INDIA1413012418- IN
Tested Sample Info. : Style / Item No.: use for
SEAON FOOD GRADE GASKET TAPE SILICONE SPONGE
Date of Sample Received : 28 oct 2018
Testing 18Period : 30 oct 2018 -9 nov 2018
Test Requested : Selected test(s) as requested by client.
Test Method : Please refer to next page(s).
Test Re 2019ults : Please refer to next page(s).
Result Summary :
Test Requested. Conclusion.
FDA 21 CFR 177.2600–Total extractive residues PASS
Conclusion : The tested parameters comply with the requirement stated in Food and Drug
Administration Regulations.
RAMUMANOJ
Approved Signatory
Test Report. No. INDIA1413012418 Date: 10 NOV 2018 Page 2 of 3
Test Results :
Notes :
mg/inch²= milligram per square inch
Test Report. No. INDIA1413012418 Date: 10 NOV 2018 Page 3 of 3
Sample photo:
. INDIA1413012418
SGS authenticate the photo on original report only
CAN16-107906.001